Starplus Triad Xts Digital Telephone Systems Station User Guide

40 Call Transfer
To answer the Screened Transfer:
Your intercom will be signaling according to the intercom 
signal switch position.
1. Answer the intercom and receive the transfer notice.
2. Press OUTSIDE LINE or flashing LOOP button on hold.
Transfer Search
When attempting to locate a party:
1. Press a station DSS button to signal the station or press 
TRANS and dial desired station.
2. If the station is unavailable, press another station DSS 
button to enter a new station number or press TRANS twice...

Caller ID Display 41
Unscreened Transfer
1. Press TRANS.
2. When the called extension begins to signal, hang up to 
transfer the call (Recall Timer starts).
3. Replace handset or press ON/OFF.
Caller ID Display
Caller ID Display (Answered Calls)
The Answered ICLID Table feature adds a table that captures 
the ICLID calls that were answered. The table can store up to 
100 entries of the most recently answered ICLID calls. A station 
may dial a unique access code to view the entries, scroll 
through the...

42 Caller ID Name/Number
Caller ID Display (Answered Calls)
An Unanswered Call Management Table with 100 entry 
capacity is maintained in the system. The calling number/name 
information pertaining to any unanswered call is placed in this 
table at the time the system determines the call was 
abandoned.
This table may be accessed from any display telephone to 
review unanswered calls. Only an Attendant station(s) can 
delete an entry from this table.
To enter the review process, dial [635]. The functions...

Calling Forward Override 43
The top line of the LCD displays the number of the caller 
and the bottom line of the LCD displays the name.
Calling Forward Override
The Call Forward Override feature allows a user to reach a busy 
station that is call forwarded. This allows the calling station to 
override the forwarding which allows the user to use Off Hook 
Voice Over (OHVO), Executive Override, Monitor, Message Wait 
Indication, Camp On, or Call Back Request at that station rather 
than forwarding to...

44 Calling Station Tone Mode Override
Calling Station Tone Mode Override
Enables a calling station to override a called station’s H or P 
intercom settings.
When placing a call to a station and tone ringing is desired:
1. Dial [6#] on the dial pad.
2. Dial the extension number,
-or-
Press DSS button of desired station (call tone rings station).
Camp On
A station may alert a busy party that an outside line is on hold 
and waiting for them by using the CAMP ON button. To camp 
on a call, press the TRANS...

Camp On 45
To answer a call that is waiting:
When you hear one burst of muted ringing, press your 
flashing CAMP ON button.
Any outside line you are connected to is placed on hold. 
Converse with the station placing the call,
-or-
If a call is being transferred, press the flashing OUTSIDE 
LINE button.
If you do not have a CAMP ON button:
†Go on-hook with your present call, the Camp On call 
will ring through,
-or-
†Place the present call on hold, then go on-hook, the 
Camp On call will ring through....

46 CO Line - Access
CO Line - Access
To access an outside line:
1. Press idle CO line button, POOL button,
-or-
Dial CO line group access code or LCR code: 9, 801-823, 
88+LLL (LLL = CO Line number).
2. Dial desired number for outside call.
3. Lift handset to converse or use speakerphone.
SINGLE LINE TELEPHONE
To access an outside line:
1. Lift the handset.
2. Dial access code: 9, 801-823, 88+LLL (LLL = CO line 
number).
3. Dial telephone number.
CO Line Queue
If you see that a particular outside line...

Conference 47
To answer a queue:
If you hear ringing and an outside line of the line group or a 
LOOP button you queued onto is rapidly flashing:
1. Lift handset or press ON/OFF button.
2. Press flashing OUTSIDE LINE button or LOOP button to 
answer.
To cancel a call back request:
1. Dial the CO Line Queue Cancel code [626] on the dial pad.
2. Replace handset or press ON/OFF button.
SINGLE LINE TELEPHONE
1. Dial outside line access code. Receive busy tone.
2. Briefly depress and release the...

48 Conference
Conference Procedures
8-button digital/electronic telephones can assign a Conference 
button by using feature code 624.
To establish a Conference:
1. Lift handset.
2. Select intercom station or dial desired outside party.
3. When called party answers, press the CONF button.
4. Add next conference party by selecting another outside 
line or intercom station.
5. If the next conference party is an outside line and a busy or 
wrong number is encountered, press one of the conference 
parties on...

Conference 49
1. Lift handset to re-enter a monitored conference.
2. To re-enter a conference placed on hold, repeat steps for 
establishing a conference.
3. To re-enter an unsupervised conference, lift handset and 
press flashing CONF button. The CONF button lights steady 
and a confirmation tone sounds.
To terminate a Conference, the conference initiator who is 
actively in the conference must:
Replace handset or push ON/OFF button to OFF.
To terminate an Unsupervised Conference:
Press the flashing...