Telrad Digital Telrad Avanti 3020, 3015d Set User Guide

24 Avanti 3020 and Avanti 3015D sets
To program a DND message
1. Press [FEATURE]
.
2. Press [SPEED DIAL/PROG]
.
3. Press [DND] 
or 
On the Avanti 3020, 
{DND MSG}
On the Avanti 3015D, {DND MG}.
4. Enter a message number, 
or, 
Press [LO  HI]
 repeatedly to scroll through the available 
messages (see the DND Messages table at the end of 
this guide for a complete list of available messages).
If the message includes asterisks (*), you may edit the 
message by pressing the desired digits on the dialpad....

Avanti 3020 and Avanti 3015D sets 25
FORWARDING CALLS
You may program your telephone set to forward your calls 
to another extension.
To program call forwarding (Avanti 3020)
1. If your set does not have DN buttons, 
skip to step 2. 
If you want to program forwarding for a specific DN, first 
press the desired DN button. 
If more than one set with a button for the same DN is 
authorized to forward calls for that DN, the last pro-
gramming performed overrides the previous.
2. Press 
{CALL FWD}.
If you...

26 Avanti 3020 and Avanti 3015D sets
the contents of the memory. Calls are forwarded to 
the contents of the MEMORY button or SPEED 
DIAL bin. If you change the contents of the SPEED 
DIAL bin, calls are forwarded to the new destina-
tion. This does not apply to the MEMORY button.
6. Hang up.
To cancel call forwarding (Avanti 3020)
1. If your set does not have DN buttons, skip to step 2. 
If you want to cancel forwarding for a specific DN, first 
press the desired DN button.
2. Press [#]
.
3. Press...

Avanti 3020 and Avanti 3015D sets 27
4. Dial the code designating the calls you want forwarded:
5. Enter the new destination for Call forwarding.
NOTE
Instead of dialing the extension number, you may 
press a MEMORY button programmed with an 
extension number (for internal calls only) - or press 
a SPEED DIAL button (or press [SPEED DIAL/
PROGRAM]
 and a SPEED DIAL memory bin num-
ber) for internal or external calls, as determined by 
the contents of the memory. Calls are forwarded to 
the contents of...

28 Avanti 3020 and Avanti 3015D sets
5. Dial the code designating the type of call forwarding 
that you want to cancel:
6. Hang up.
CANCELING CALL FORWARD TO ME
If another set has programmed your telephone set as its 
forwarding destination and you do not wish to be disturbed 
by those calls, you can cancel your status as a call for-
warding destination.
To cancel Call Forward to me
1. Press [#]
.
2. On the Avanti 3020, press 
{FLW TO ME}.
On the Avanti 3015D, press 
{FL 2ME}.
3. Dial the extension...

Avanti 3020 and Avanti 3015D sets 29
ABBREVIATED DIALING
This section describes several ways of abbreviating dial-
ing. Save/Repeat and Redial are described in Outside 
Calls, above.
SPEED DIAL
Speed dial shortens the procedure of dialing outside num-
bers by using speed dial buttons and speed dial memories 
(called “bins”).
To speed dial an outside number
• Press [SPEED DIAL/PROGRAM]
 and dial the speed 
dial code (three digits),
or
Press the appropriate SPEED DIAL button.
To program a speed dial bin...

30 Avanti 3020 and Avanti 3015D sets
MEMORY BUTTONS
Memory buttons are used for one-press dialing of exten-
sions and feature access codes.
To dial with a MEMORY button
• Press the programmed button.
To program a MEMORY button
1. Press [FEATURE]
.
2. Press [SPEED DIAL/PROGRAM]
.
3. Press the MEMORY button to be programmed.
4. Dial the desired extension number (up to four digits)
or 
Press [FEATURE]
 and then dial the desired feature 
code.
See the Feature Codes Table at the end of this guide.
5. Hang...

Avanti 3020 and Avanti 3015D sets 31
General key functions
Use the [LO HI]
 button to scroll through the menu of lists 
and through the entries in the Phone Book lists. If you only 
see the name, press the [LO HI]
 button to view the num-
ber.
Press [FEATURE]
 to return to the previous display.
Press  
{EXIT} to exit from the Phone Book feature.
Press [MUTE]
 to delete the last character(s) you entered. 
Press [HOLD]
 to save your programming and continue 
programming another entry.
To save your...

32 Avanti 3020 and Avanti 3015D sets
If you want to see details of the entry before dialing the 
number on the Avanti 3020 telephone set, press the 
softkey on the right side of the appropriate name.
With the Avanti 3015D telephone set, press  [TRANSFER]
. 
The display shows the name for the entry, the number of 
the speed dial bin (e.g. 003) where the entry is stored, and 
the telephone number for the entry.
You can then press 
{DIAL} to dial the number, {UPDATE}   
to change the name or number for the...

Avanti 3020 and Avanti 3015D sets 33
To delete an entry from your private Phone Book
1. Access Phone Book as if you are going to dial a num-
ber (steps 1-4  in “To dial a number from the Phone 
Book
” above) for the entry you want to delete.
2. On the Avanti 3020 telephone set, press the softkey to 
the right of the entry,
On the Avanti 3015D telephone set, press [TRANS-
FER]
.
3. Press 
{REMOVE}.
To revise an entry in your private Phone Book
1. Access the entry you want to revise.
2. On the Avanti 3020...