Home > Telrad Digital > Telephone > Telrad Digital Telrad Avanti 3020, 3015d Set User Guide

Telrad Digital Telrad Avanti 3020, 3015d Set User Guide

Here you can view all the pages of manual Telrad Digital Telrad Avanti 3020, 3015d Set User Guide. The Telrad Digital manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 41

34 Avanti 3020 and Avanti 3015D sets
Phone Book dialing equivalents
As shown in the above table, you press the dialpad button 
once for the first letter appearing on it, twice for the second 
letter appearing on it, and three times for the third letter 
appearing on it.
With each press of the button, the corresponding character 
appears on the display.
If you want to enter two characters from the same button 
on the dialpad, for example D followed by E, wait two sec-
onds between entering characters...

Page 42

Avanti 3020 and Avanti 3015D sets 35
Warning signal
You hear a three-beep warning tone:
• If you try to access a Phone Book list that you are not 
authorized to use;
• If you try to save a name without entering a number for it; 
• If you try to add a new name to your private list when 
you have no available speed dial bins; or
• If you try to access a list that has no names defined.
Caller ID
If you receive a call made from a telephone number that 
appears in your Phone Book, and if your system supports...

Page 43

36 Avanti 3020 and Avanti 3015D sets
ALARM
Your telephone can sound an alarm ring at a programmed 
time.
To program an alarm time
1. On the Avanti 3020 set, press 
{PROGRAM}.
On the Avanti 3015D set, press 
{PROG}.
2. Press 
{TIME}.
3. Dial the four-digit alarm time (HH:MM) using the 24 
hour format (e.g. 1530 for 3:30 pm).
4. Press 
{SAVE}.
To cancel the alarm setting
1. Press [#]
.
2. Press [FEATURE]
.
3. Dial TIME ALARM access code [8][2]
.
4. Hang up.
To stop the alarm ring
•Press [SPKR]
 twice or...

Page 44

Avanti 3020 and Avanti 3015D sets 37
TELEPHONE LOCK
You can prevent people from making outside calls from 
your telephone.
To lock your telephone
1. Dial the LOCK access code.
Display telephones show 
ENTER CODE:
2. Dial your Executive Credit Code (see your System 
Administrator).
3. Hang up.
The telephone lock dialing restrictions are in effect. 
The [LOCK]
 button, if defined, lights.
To unlock your telephone
• Repeat the above procedure.
3020&3015D.txt.book  Page 37  Tuesday, August 3, 1999  1:14 PM 

Page 45

38 Avanti 3020 and Avanti 3015D sets
DOOR UNIT
Your system may have a door unit equipped with an inter-
com and electric door latch. When a visitor presses the 
doorbell, up to four system extensions ring.
When the door bell rings
If your telephone is ringing:
• Press [SPKR]
 or lift the handset.
If another extension is ringing:
• Dial the PAGE zone access code associated with the 
door unit,
or
Press the flashing [DOOR]
 button, if defined.
You can now speak with the person at the door. 
To open the...

Page 46

Avanti 3020 and Avanti 3015D sets 39
NOTE PAD
You can save a number of up to 16 digits during a call.
1. Press [FEATURE]
.
2. Press [SPEED DIAL/PROGRAM] 
twice.
3. Dial an available speed dial bin number (three digits) or 
press an available SPEED DIAL button.
4. Enter up to 16 digits.
5. Press [SPEED DIAL/PROGRAM]
. 
To dial the number saved, do a regular Speed Dial 
using the Speed Dial bin number or button you used to 
save the number (see
 ABBREVIATED DIALING).
3020&3015D.txt.book  Page 39  Tuesday,...

Page 47

40 Avanti 3020 and Avanti 3015D sets
ADVANCED FEATURES
This section lists some advanced features which you can 
activate from your telephone. Details concerning the oper-
ation of these features can be found in the DIGITAL Sys-
tems Operating Instructions manual.
• Account code (voluntary, reminder, forced);
• Answering a second incoming call;
• Background music;
• Camp on;
• Conference loop;
• Confirmed transfer;
• Dial attendant;
•DISA;
• Executive Credit Code (ECC) programming;
• Executive intercom;
•...

Page 48

Avanti 3020 and Avanti 3015D sets 41
FEATURE CODES
Features can be activated by pressing the [FEATURE]
 but-
ton and then dialing a feature access code.
The default feature codes (see next page) reflect the fea-
ture initials, using the letters on the dialpad buttons.
For example:
To access Barge In
•Press [FEATURE] 
followed by the dialpad buttons cor-
responding to the letters BI (Barge In).
That is,
The feature codes in your system may have been 
changed. If so, enter the updated feature access codes...

Page 49

42 Avanti 3020 and Avanti 3015D sets
Feature codes
Feature name  Abbreviation  Access method
ACCOUNT CODE AT
[FEATURE][2][8]
ACD LOGIN (1)--
ACD LOGOUT (1)--
ALL/GROUP -[*]
ATTENDANT -[0]
BACKGROUND MUSIC 1 BM[FEATURE][2][6]
BACKGROUND MUSIC 2-4 (1) (3)--
BARGE IN BI[FEATURE][2][4]
CALL ACCOUNT MONITOR (1)--
CALLBACK/QUEUE CB[FEATURE][2][2]
CALL FORWARD-ALWAYS FL[FEATURE][3][5]
CALL FORWARD-BUSY FB[FEATURE][3][2]
CALL FORWARD-NO ANSWER  FN[FEATURE][3][6]
CANCEL -[#]
CLIR (1) (2)--
CONFERENCE LOOP 1-10...

Page 50

Avanti 3020 and Avanti 3015D sets 43
MEET ME CONFERENCE 1-5  (1)--
MEET ME PAGE MM[FEATURE][6][6]
MESSAGE ME[FEATURE][6][3]
NIGHT SERVICE (1)--
PAGE - INTERNAL 
1 throu
gh 8I1 throu
gh I8[FEATURE][4][1] 
through [4][8]
PAGE - EXTERNAL 
1 throu
gh 8 (1)
X1 through X8-
PHONE BOOK (private list) -[FEATURE][7][1]
PHONE BOOK (system lists 1 to 10) -[FEATURE]
[7][2][1] to 
[7][2][1][0]
PICKUP PU [FEATURE][7][8]
PROGRAM PM[FEATURE][7][6]
REDIAL RL[FEATURE][7][5]
SAVE/REPEAT SR[FEATURE][7][7]
SPEED DIAL...
Start reading Telrad Digital Telrad Avanti 3020, 3015d Set User Guide

Related Manuals for Telrad Digital Telrad Avanti 3020, 3015d Set User Guide

All Telrad Digital manuals