Timex Automatic User Manual

W231 NA 714-095005-01
W231_NA_EN_W231_NA_EN  11/2/09  11:30 AM  Page cvr1 

Englishpage 1
Français page 21
Español página 47 
W231_NA_EN_W231_NA_EN  11/2/09  11:06 AM  Page 3 

TIMEX®WATCHES
Congratulations on purchasing your TIMEX®watch.
Please read these instructions carefully to 
understand how to operate your Timex timepiece.
Your watch may not have all of the features
described in this booklet. Please look for your style
For more information and to register your product please visit:
Timex.com
STYLE 1 STYLE 2STYLE 3 STYLE 4STYLE 5
W231_NA_EN_W231_NA_EN  11/2/09  11:06 AM  Page ENii 

TABLE OF CONTENTS
1Screw-Down Crown
2 Water and Shock Resistance
4 Automatic Style 1
7 Automatic Style 2
9 Automatic Style 3
11 Automatic Style 4
14 Automatic Style 5
15 How to Adjust Bracelets
17 Warranty
ENGLISH
W231_NA_EN_W231_NA_EN  11/2/09  11:06 AM  Page ENiv 

SCREW-DOWN CROWNSome deep-depth water-resistant watches require
the setting crown to be screwed in to secure water-
resistance. If your watch case has a protrusion with
screw threads, the crown must be screwed in after
setting the watch.
To screw in, push the crown firmly against the
threaded protrusion and hold in while turning the
crown clockwise. Continue to screw in the crown
until it is tight. You will need to unscrew the crown
(counterclockwise) before pulling it out the next time
you want to set...

1. Watch is water-resistant only as long as crystal,crown and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Screw-in setting crown and case back must be screwed into case to assure water-resistance 
(see Set Time for Style 1). 
4. Rinse watch with fresh water after exposure to salt water.
5. Shock-resistance will be indicated on the watch face or caseback. Watches are designed to pass
ISO test for shock-resistance. However, care
should be taken to avoid damaging...

HOW TO SET “QUICK DATE®FEATURE”3-Position Crown:
Unscrew crown until you reach position “2” and turn
counter  clockwiseuntil correct date appears.
NOTE: Date may need to be manually updated at 
the end of each month by following above procedure
(otherwise it will continue to 31 and then roll over to
01 each month).
HOW TO WIND YOUR WATCHFrom crown position 1, turn crown clockwise to wind
watch.
5
ENGLISH
4
ENGLISH
 14 
I       I
141 2 3
AUTOMATIC STYLE 1 
TO SET TIME1. Unscrew crown and pull out to...

AUTOMATIC STYLE 2 
TO SET TIME1. Pull crown to position 2 and turn crown to setcorrect time.
2. Push crown in to restart.
HOW TO WIND YOUR WATCHFrom crown position 1, turn crown clockwise to
wind.
7
ENGLISH
POWER RESERVEThe watch is self-winding. If you wear your watch
every day, there should be no need to wind it every
24 hours, unless the power reserve shows “LOW”.
The maximum power reserve is at least 36 hours. The
power reserve indicator shows you how much power
remains. You should wind your watch...

9
ENGLISH
POWER RESERVEOnce you begin to wear the watch, the movement 
of your wrist will generate power to keep the watch
running.
NOTE: The maximum power reserve is at least 
36 hours. 
8
ENGLISH
AUTOMATIC STYLE 3 
TO SET TIME1. Pull crown to position 2 and turn crown to set correct time.
2. Push crown to restart.
TO SET DATEWith a blunt object, press recessed button at 
8 o’clock position. Each button press advances date
one day.
Power Indicator Retrograde date 
1 2 
Second Hand 
Hour Hand Minute Hand...

AUTOMATIC STYLE 4 
WINDING THE WATCH MANUALLYThe watch can be manually wound by turning the
crown in the normal crown position (position 1) 15 
to 20 times. The second hand should start to move
naturally.
SETTING THE TIME1. Pull the crown out one click (position 2)
2. Slowly rotate the crown until the hour and minutehands are in the correct position for the current
11
ENGLISH
Note:  After the date has reached “31” the hand will
fly back down to “1”.
HOW TO WIND YOUR WATCHFrom crown position 1, turn crown...