Toshiba B Sa4t G Manual
Have a look at the manual Toshiba B Sa4t G Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 70
- 67 -
6.3 VARIOUS PARAMETERS SETTING
6.3.1 Various Parameters Setting Operation Example
Power OFF
(1) Power off state
[FEED] [RESTART] (2) While holding the [FEED] and [RESTART] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-69.png "Page 70
- 67 -
6.3 VARIOUS PARAMETERS SETTING
6.3.1 Various Parameters Setting Operation Example
Power OFF
(1) Power off state
[FEED] [RESTART] (2) While holding the [FEED] and [RESTART] keys
down, turn the power on.
< 1 > D I A G . V 1 . 2 A
(3) The self-test menu is displayed.
[FEED]
(4) Press the [FEED] key.
< 2 > P A R A M E T E R S E T
(5) System mode menu display
(Parameter setting)...")
![Page 71
- 68 -
< 2 > P A R A M E T E R S E T
S P E E D 9 6 0 0 b p s
(11) RS232C communication speed setting:
Select a communication speed using the
[FEED] and [RESTART]
[PAUSE]
(12) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
D A T A L E N G . 8 b i t s
(13) RS232C data length setting:
Select a data length using the [FEED] and
[RESTART] keys.
[PAUSE]
(14) Press the [PAUSE] key.
< 2 > P A R A...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-70.png "Page 71
- 68 -
< 2 > P A R A M E T E R S E T
S P E E D 9 6 0 0 b p s
(11) RS232C communication speed setting:
Select a communication speed using the
[FEED] and [RESTART]
[PAUSE]
(12) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
D A T A L E N G . 8 b i t s
(13) RS232C data length setting:
Select a data length using the [FEED] and
[RESTART] keys.
[PAUSE]
(14) Press the [PAUSE] key.
< 2 > P A R A...")
![Page 72
- 69 -
< 2 > P A R A M E T E R S E T
F E E D K E Y F E E D
(29) [FEED] key function setting:
Select a function of the [FEED] key using the
[FEED] and [RESTART] keys.
[PAUSE]
(30) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
K A N J I C O D E T Y P E 1
(31) Kanji code setting:
Select a Kanji code using the [FEED] and
[RESTART] keys.
[PAUSE]
(32) Press the [PAUSE] key.
< 2 > P A R A M E...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-71.png "Page 72
- 69 -
< 2 > P A R A M E T E R S E T
F E E D K E Y F E E D
(29) [FEED] key function setting:
Select a function of the [FEED] key using the
[FEED] and [RESTART] keys.
[PAUSE]
(30) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
K A N J I C O D E T Y P E 1
(31) Kanji code setting:
Select a Kanji code using the [FEED] and
[RESTART] keys.
[PAUSE]
(32) Press the [PAUSE] key.
< 2 > P A R A M E...")
![Page 73
- 70 -
< 2 > P A R A M E T E R S E T
P L U G & P L A Y O F F
(47) Plug-and-play operation setting:
Enable/disable the plug-and-play operation
function using the [FEED] and [RESTART]
keys.
[PAUSE]
(48) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
L B L / R B N E N D T Y P 1
(49) Label end/ribbon error process setting:
Select a label end or ribbon error process
using the [FEED] and [RESTART] keys....](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-72.png "Page 73
- 70 -
< 2 > P A R A M E T E R S E T
P L U G & P L A Y O F F
(47) Plug-and-play operation setting:
Enable/disable the plug-and-play operation
function using the [FEED] and [RESTART]
keys.
[PAUSE]
(48) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
L B L / R B N E N D T Y P 1
(49) Label end/ribbon error process setting:
Select a label end or ribbon error process
using the [FEED] and [RESTART] keys....")
![Page 74
- 71 - < 2 > P A R A M E T E R S E T
M U L T I L A B E L O F F(65) Multiple-label set issue:
Enable/disable the function using the [FEED]
and [RESTART] keys.
[PAUSE]
(66) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P A S S W O R D O F F - - - -(67) System mode password operation setting:
Set the system mode password operation
using the [FEED] or [RESTART] key.
[PAUSE]
(68) Press the [PAUSE] key.
< 2 > P A R A M E T...](http://img.usermanuals.tech/thumb/76/103590/w64_b-sa4t-g-manual-1513609621_d-73.png "Page 74
- 71 - < 2 > P A R A M E T E R S E T
M U L T I L A B E L O F F(65) Multiple-label set issue:
Enable/disable the function using the [FEED]
and [RESTART] keys.
[PAUSE]
(66) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P A S S W O R D O F F - - - -(67) System mode password operation setting:
Set the system mode password operation
using the [FEED] or [RESTART] key.
[PAUSE]
(68) Press the [PAUSE] key.
< 2 > P A R A M E T...")
- 68 -
< 2 > P A R A M E T E R S E T
S P E E D 9 6 0 0 b p s
(11) RS232C communication speed setting:
Select a communication speed using the
[FEED] and [RESTART]
[PAUSE]
(12) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
D A T A L E N G . 8 b i t s
(13) RS232C data length setting:
Select a data length using the [FEED] and
[RESTART] keys.
[PAUSE]
(14) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
S T O P B I T 1 b i t
(15) RS232C stop bit length setting:
Select a stop bit length using the [FEED] and
[RESTART] keys.
[PAUSE]
(16) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P A R I T Y E V E N
(17) RS232C parity setting:
Select a parity value using the [FEED] and
[RESTART] keys.
[PAUSE]
(18) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
X O N + R E A D Y A U T O
(19) RS232C flow control method setting:
Select a flow control method using the [FEED]
and [RESTART] keys.
[PAUSE]
(20) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
L C D E N G L I S H
(21) Setting of language for LCD messages:
Select a language for LCD messages using the
[FEED] and [RESTART] keys.
[PAUSE]
(22) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
F O R W A R D W A I T O F F
(23) Setting of forward feed standby after an issue:
Enable/disable the forward feed standby
function using the [FEED] and [RESTART]
keys.
[PAUSE]
(24) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
C O D E E S C , L F , N U L
(25) Control code setting:
Select a control code using the [FEED] and
[RESTART] keys.
[PAUSE]
(26) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P E E L O F F S T S O F F
(27) Strip wait status setting:
Enable/disable the Strip wait status function
using the [FEED] and [RESTART] keys.
[PAUSE]
(28) Press the [PAUSE] key.
- 69 -
< 2 > P A R A M E T E R S E T
F E E D K E Y F E E D
(29) [FEED] key function setting:
Select a function of the [FEED] key using the
[FEED] and [RESTART] keys.
[PAUSE]
(30) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
K A N J I C O D E T Y P E 1
(31) Kanji code setting:
Select a Kanji code using the [FEED] and
[RESTART] keys.
[PAUSE]
(32) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
E U R O C O D E B 0
(33) Euro code setting:
Select a Euro code using the [FEED] and
[RESTART] keys.
[PAUSE]
(34) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
A U T O H D C H K O F F
(35) Automatic head broken dots check setting:
Enable/disable the automatic head broken dots
check using the [FEED] and [RESTART] keys.
[PAUSE]
(36) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
A C K / B U S Y T Y P E 1
(37) Centronics ACK/BUSY timing setting:
Select an ACK/BUSY timing using the [FEED]
and [RESTART] keys.
[PAUSE]
(38) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
W E B P R I N T E R O F F
(39) Web printer function setting:
Enable/disable the web printer function using
the [FEED] and [RESTART] keys.
[PAUSE]
(40) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
I N P U T P R I M E O N
(41) Setting of reset process when the nInit signal is
ON:
Enable/disable the reset process function
using the [FEED] and [RESTART] keys.
[PAUSE]
(42) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
R B N N E A R E N D 7 0 m
(43) Ribbon near end detection setting:
Select a remaining ribbon length to be detected
as a ribbon near end state using the [FEED]
and [RESTART] keys.
[PAUSE]
(44) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
E X . I / O T Y P E 1
(45) Expansion I/O operation mode setting:
Select an operation mode using the [FEED]
and [RESTART] keys.
[PAUSE]
(46) Press the [PAUSE] key.
- 70 -
< 2 > P A R A M E T E R S E T
P L U G & P L A Y O F F
(47) Plug-and-play operation setting:
Enable/disable the plug-and-play operation
function using the [FEED] and [RESTART]
keys.
[PAUSE]
(48) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
L B L / R B N E N D T Y P 1
(49) Label end/ribbon error process setting:
Select a label end or ribbon error process
using the [FEED] and [RESTART] keys.
[PAUSE]
(50) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P R E P E E L O F F O F F
(51) Pre-strip process setting:
Enable/disable the pre-strip process function
using the [FEED] and [RESTART] keys.
[PAUSE]
(52) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
B A C K S P E E D S T D
(53) Reverse feed speed setting:
Select a reverse feed speed using the [FEED]
and [RESTART] keys.
[PAUSE]
(54) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
M A X I C O D E T Y P E 1
(55) MaxiCode specification setting:
Select a type of MaxiCode specification using
the [FEED] and [RESTART] keys.
[PAUSE]
(56) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
K B I / F O F F
(57) Keyboard I/F setting:
Enable/disable the keyboard I/F using the
[FEED] and [RESTART] keys.
[PAUSE]
(58) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P E E L O F F T R Q R 0(59) Strip motor torque setting:
Select a strip motor torque using the [FEED]
and [RESTART] keys.
[PAUSE]
(60) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
T O N E T A B L E T Y P E 1(61) Print head applied current table setting:
Select the type of table using the [FEED] or
[RESTART] key.
[PAUSE]
(62) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
C U T M O D E T Y P E 1
(63) High speed cut issue:
Select a cut issue type using the [FEED] and
[RESTART] keys.
[PAUSE]
(64) Press the [PAUSE] key.
- 71 - < 2 > P A R A M E T E R S E T
M U L T I L A B E L O F F(65) Multiple-label set issue:
Enable/disable the function using the [FEED]
and [RESTART] keys.
[PAUSE]
(66) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
P A S S W O R D O F F - - - -(67) System mode password operation setting:
Set the system mode password operation
using the [FEED] or [RESTART] key.
[PAUSE]
(68) Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
(69) The parameter setting menu is displayed.
- 72 - FEED RESTART 6.3.2 Details of Various Parameter Setting (1) Character code (FONT CODE) • PC-8 • PC-857 • PC-852 • PC-850 • Arabic • LATIN9 • PC-1257 • PC-1254 • PC-1253 • PC-1252 • PC-1251 • PC-1250 • PC-855 • PC-851 • PC-866 • UTF-8 (2) Font “0” (ZERO FONT) • 0 (Without slash) • 0 (With slash) (3) RS-232C communication speed (SPEED) • 115200 bps • 38400 bps • 19200 bps • 9600 bps • 4800 bps • 2400 bps FEED RESTART FEED RESTART NOTE: The following fonts do not support a zero with a slash. Therefore, even if a zero with a slash is selected, a zero without a slash is used. [Bit map fonts] OCR-A, OCR-B, GOTHIC725 Black, Kanji, Chinese Kanji [Outline fonts] Price fonts 1, 2, and 3, DUTCH801 Bold, BRUSH738 Regular, GOTHIC725 Black, TrueType font
- 73 - (4) RS-232C data length (DATA LENG.)
• 8 bits
• 7 bits
(5) RS-232C stop bit length (STOP BIT)
• 2 bits
• 1 bit
(6) RS-232C parity (PARITY)
• EVEN
• ODD
• NONE
(7) RS-232C flow control method (XON/XOFF, READY/BUSY)
• XON/XOFF AUTO : XON/XOFF protocol
(XON output when the power is on, XOFF
output when the power is off)
• XON + READY AUTO : XON/XOFF + READY/BUSY (DTR) protocol
(XON output when the power is on, XOFF
output when the power is off)
• READY/BUSY : READY/BUSY (DTR) protocol
(No XON output when the power is on, no
XOFF output when the power is off)
• XON/XOFF : XON/XOFF protocol
(No XON output when the power is on, no
XOFF output when the power is off)
• READY/BUSY RTS : RTS protocol
(No XON output when the power is on, no
XOFF output when the power is off)
FEED
RESTART
FEED
RESTART
FEED
RESTART
FEED
RESTART
- 74 - (8) Language for LCD messages (LCD) • ENGLISH • ITALIAN • JAPANESE • SPANISH • DUTCH • FRENCH • GERMAN (9) Forward feed standby after an issue (FORWARD WAIT) FEED RESTART [FEED] [RESTART] FORWARD WAIT OFF FORWARD WAIT ON POSITION +0.0mm POSITION +0.1mm POSITION +5.0mm POSITION -5.0mm [PAUSE] [FEED] [RESTART] [FEED] [RESTART] [FEED] [RESTART][FEED] [RESTART] POSITION -4.9mm [FEED] [RESTART] POSITION -0.1mm [FEED] [RESTART] • OFF: Disabled • ON: Enabled Setting for a fine adjustment value for a stop position after a forward feed standby: -5.0 mm to +5.0 mm +: Performs a longer length of a forward feed, then stops. -: Performs a shorter length of a forward feed, then stops. [FEED] [RESTART]
- 75 - (10) Control code (CODE)
(11) Strip wait status (PEEL OFF STS)
• OFF: Disabled
• ON: Enabled
(12) [FEED] key function (FEED KEY)
• FEED: Feeds one label.
• PRINT: Prints data in the image buffer on one label.
FEED
RESTART [FEED] [RESTART]
CODE AUTO
CODE ESC,LF,NUL
CODE { | }
CONTROL CODE1 1B
CODE MANUAL
CONTROL CODE2 0A[PAUSE]
PEEL OFF STS OFF
CONTROL CODE3 00
[FEED] [RESTART]
[FEED] [RESTART]
[PAUSE]
[PAUSE]
[PAUSE]
[FEED] [FEED] [RESTART]
CONTROL CODE1 02
CONTROL CODE1 01
CONTROL CODE1 FE
CONTROL CODE1 00
CONTROL CODE1 FF [FEED][RESTART]
[FEED][RESTART]
[FEED][RESTART]
[RESTART] [FEED] [RESTART]
FEED
RESTART [FEED] [RESTART]
CODE IBM HOST NOTE: IBM HOST is only for the Japan model.
- 76 - (13) Kanji code (KANJI CODE) (14) Euro code (EURO CODE) (15) Automatic head broken dots check (AUTO HD CHK) • OFF: A head broken dots check is not automatically performed when the power is turned on. • ON: A head broken dots check is automatically performed when the power is turned on. (16) Centronics ACK/BUSY timing (ACK/BUSY) • TYPE 1 BUSY goes low at the same time as when ACK goes high. • TYPE 2 BUSY goes high at the same time as when ACK goes low. (17) Web printer function (WEB PRINTER) • OFF: Web printer function is disabled. • ON: Web printer function is enabled. TYPE 1: For Windows codes TYPE 2: For original codes FEED RESTART FEED RESTART FEED RESTART 20H FFH KANJI CODE TYPE1 KANJI CODE TYPE2[FEED] [RESTART] EURO CODE B0 EURO CODE B1 [FEED] [RESTART]
- 77 - (18) Reset process when the nInit signal is ON (INPUT PRIME) • OFF: The reset process is not performed. • ON: The reset process is performed. (19) Ribbon near end detection (RBN NEAR END) • 70 m: A ribbon near end state is detected when the remaining ribbon length is approximately 70 m. • 30 m: A ribbon near end state is detected when the remaining ribbon length is approximately 30 m. • OFF: A ribbon near end state is not detected. NOTE: There are some variations in detecting a ribbon near end state. It is preferable to use this setting for reference purposes. (20) Expansion I/O operation mode (EX. I/O) • TYPE1: Standard mode • TYPE2: In-line mode (21) Plug-and-play operation (PLUG & PLAY) • OFF: A plug-and-play operation is disabled. • ON: A plug-and-play operation is enabled. NOTE: In the USB interface, plug-and-play operations are always enabled, regardless of this setting. FEED RESTART FEED RESTART FEED RESTART FEED RESTART