Toshiba B852 User Manual
Have a look at the manual Toshiba B852 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-23
2.9.1 Parameter Setting (Cont.)
(14) Auto Print Head Check Selection
This parameter is to choose whethe
r to perform the Auto Print Head
Check function at the power on time. When “PARAMETER SET”
appears, press the [PAUSE] key until the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting auto print head check, press the...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-35.png "Page 36
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-23
2.9.1 Parameter Setting (Cont.)
(14) Auto Print Head Check Selection
This parameter is to choose whethe
r to perform the Auto Print Head
Check function at the power on time. When “PARAMETER SET”
appears, press the [PAUSE] key until the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting auto print head check, press the...")
![Page 37
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-24
2.9.1 Parameter Setting (Cont.)
(16) Web Printer Function Selection
This parameter is to choose whether to
use the printer as a web printer.
When “PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the Web printer function, press the [PAUSE] key.
(17) Input...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-36.png "Page 37
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-24
2.9.1 Parameter Setting (Cont.)
(16) Web Printer Function Selection
This parameter is to choose whether to
use the printer as a web printer.
When “PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the Web printer function, press the [PAUSE] key.
(17) Input...")
![Page 39
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-26
2.9.1 Parameter Setting (Cont.)
(20) Label End/Ribbon End Selection
This parameter is to choose a printing process when a label end or ribbon
end is detected.
When “PARAMETER SET” appears, press the
[PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a Label End type, press the [PAUSE]...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-38.png "Page 39
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-26
2.9.1 Parameter Setting (Cont.)
(20) Label End/Ribbon End Selection
This parameter is to choose a printing process when a label end or ribbon
end is detected.
When “PARAMETER SET” appears, press the
[PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a Label End type, press the [PAUSE]...")
![Page 40
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-27
2.9.2 Dump Mode Setting
While “DUMP MODE” is displayed on the LCD Message Display,
press the [PAUSE] key to enter the Dump Mode.
In the Dump Mode, data in the receive buffer are printed. Data are
expressed in hexadecimal values. This operation allows the user to verify
programming commands or debug the program.
When “DUMP MODE” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-39.png "Page 40
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-27
2.9.2 Dump Mode Setting
While “DUMP MODE” is displayed on the LCD Message Display,
press the [PAUSE] key to enter the Dump Mode.
In the Dump Mode, data in the receive buffer are printed. Data are
expressed in hexadecimal values. This operation allows the user to verify
programming commands or debug the program.
When “DUMP MODE” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key...")
![Page 42
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-29
2.9.3 BASIC Expansion Mode
While “EXPAND MDOE” is displaye d on the LCD Message Display,
press the [PAUSE] key to enter the BASIC Expansion Mode.
In the BASIC Expansion Mode, it is possible to execute the BASIC
expansion mode program unde r the following conditions.
• The BASIC expansion mode program has already been loaded.
• The BASIC enable setting mode is selected.
The basic expansion mode ends...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-41.png "Page 42
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-29
2.9.3 BASIC Expansion Mode
While “EXPAND MDOE” is displaye d on the LCD Message Display,
press the [PAUSE] key to enter the BASIC Expansion Mode.
In the BASIC Expansion Mode, it is possible to execute the BASIC
expansion mode program unde r the following conditions.
• The BASIC expansion mode program has already been loaded.
• The BASIC enable setting mode is selected.
The basic expansion mode ends...")
![Page 43
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-30
2.9.4 Automatic Calibration
While “AUTO CALIB” is displayed on the LCD Message Display,
press the [PAUSE] key to enter the Automatic Calibration Mode.
In the Automatic Calibration Mode, whether to activate the automatic
calibration at a power on time or not is selectable. When the automatic
calibration is activated, the printer feeds the media for about 160 mm
each time the power is turned on or the...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-42.png "Page 43
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-30
2.9.4 Automatic Calibration
While “AUTO CALIB” is displayed on the LCD Message Display,
press the [PAUSE] key to enter the Automatic Calibration Mode.
In the Automatic Calibration Mode, whether to activate the automatic
calibration at a power on time or not is selectable. When the automatic
calibration is activated, the printer feeds the media for about 160 mm
each time the power is turned on or the...")
![Page 44
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-31
2.9.5 LAN Setting While “LAN” is displayed on the LCD Message Display, press the
[PAUSE] key to enter the LAN Setting Mode.
In the LAN Setting Mode, whether to enable the LAN communication
and SNMP or not is selectable.
When “LAN” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the LAN setting, press the [PAUSE] key....](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-43.png "Page 44
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-31
2.9.5 LAN Setting While “LAN” is displayed on the LCD Message Display, press the
[PAUSE] key to enter the LAN Setting Mode.
In the LAN Setting Mode, whether to enable the LAN communication
and SNMP or not is selectable.
When “LAN” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the LAN setting, press the [PAUSE] key....")
![Page 45
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-32
2.9.6 Real Time Clock Setting
While “RTC SET” is displayed on the LCD Message Display, press
the [PAUSE] key to enter the Real Time Clock Setting Mode.
The Real Time Clock Setting Mode contains the following sub menus.
Each time the [PAUSE] key is pressed, the sub menus are displayed
sequentially.
(1) Date setting (Year, Month, Day)
(2) Time setting (Hour, Minute, Second)
(3) Low...](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-44.png "Page 45
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-32
2.9.6 Real Time Clock Setting
While “RTC SET” is displayed on the LCD Message Display, press
the [PAUSE] key to enter the Real Time Clock Setting Mode.
The Real Time Clock Setting Mode contains the following sub menus.
Each time the [PAUSE] key is pressed, the sub menus are displayed
sequentially.
(1) Date setting (Year, Month, Day)
(2) Time setting (Hour, Minute, Second)
(3) Low...")
![Page 46
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-33
2.9.6 Real Time Clock Setting (Cont.)
(3) Low Battery Check Setting
This parameter is to choose whethe r to activate the low battery check
function or not.
Press the [PAUSE] key to set.
After selecting the low battery check, press the [PAUSE] key.
(4) RTC Data Renewal Timing Setting
This parameter is to choose the RTC data renewal timing.
Press the [PAUSE] key to set....](http://img.usermanuals.tech/thumb/76/99530/w64_b852-user-manual-1509345782_d-45.png "Page 46
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-33
2.9.6 Real Time Clock Setting (Cont.)
(3) Low Battery Check Setting
This parameter is to choose whethe r to activate the low battery check
function or not.
Press the [PAUSE] key to set.
After selecting the low battery check, press the [PAUSE] key.
(4) RTC Data Renewal Timing Setting
This parameter is to choose the RTC data renewal timing.
Press the [PAUSE] key to set....")
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-28
2.9.2 Dump Mode Setting (Cont.)
The data in the receive buffer is printed as follows:
Receive Buffer Size
Interface Buffer size
RS-232C 1MB (65536 lines)
Centronics 1MB (65536 lines)
Network Interface 1MB (65536 lines)
BASIC 1 8KB (512 lines)
BASIC 2 8KB (512 lines)
USB 1MB (65536 lines)
Required Label Length
Interface Media length*
RS-232C 198.2m
Centronics 198.2m
Network Interface 198.2m
BASIC 1 2m
BASIC 2 2m
USB 198.2m
*: Media length required for printing all data in the receive buffer.
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7B 41 58 3B 2B 30 30
30 2C 2B 30 30 30 2C 2B 30 {AX;+000,+000,+0
30 7C 7D 7B 44 30 37 37 30 2C 31 31 30 30 2C 30 0|}{D0760,1100,0
37 34 30 7C 7D 7B 43 7C 7D 7B 4C 43 3B 30 30 33 740|}{C|}{LC;003
30 2C 30 30 32 30 2C 30 30 33 30 2C 30 36 36 30 0,0020,0030,0660
2C 30 2C 32 7C 7D 7B 4C 43 3B 30 30 37 30 2C 30 ,0,2|}{LC;0070,0
30 32 30 2C 30 30 37 30 2C 30 36 36 30 2C 30 2C 020,0070,0660,0,
39 7C 7D 7B 4C 43 3B 30 30 35 30 2C 30 30 32 30 9|}{LC;0050,0020 :
:
:
44 45 46 47 48 49 4A 7C 7D 7B 50 43 31 30 3B 30 DEFGHIJ|}{PC10;0
33 35 30 2C 30 34 30 30 2C 31 2C 31 2C 4B 2C 30 350,0400,1,1,K,0
30 2C 42 3D 41 42 43 44 65 66 67 68 69 6A 6B 6C 0,B=ABCDefghijkl
6D 6E 6F 70 7C 7D 7B 50 56 30 32 3B 30 33 33 30 mnop|}{PV02;0330
2C 30 36 36 30 2C 30 32 37 30 2C 30 32 35 30 2C ,0660,0270,0250,
41 2C 30 30 2C 42 3D 42 7C 7D 7B 50 56 30 33 3B A,00,B=B|}{PV03; :
:
:
3B 30 39 30 30 2C 30 31 38 30 2C 54 2C 48 2C 30 ;0900,0180,T,H,0
35 2C 41 2C 30 3D 31 32 33 34 35 36 37 38 39 30 5,A,0=1234567890
41 42 43 44 45 7C 7D 00 00 00 00 00 00 00 00 00 ABCDE|} :
:
Feed direction
Print Conditions
• Printing width: 3.9 inches (100 mm)
• Sensor selection: None
• Print speed: 4”/sec.
• Printing mode: Depends on the
selection in use.
• 16 bytes/line
• Data is printed in the order from the
new one to the old one.
• Data specified by the receive buffer
write pointer will be printed in
boldface.
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.9 Setting an Operating Environment E2-29 2.9.3 BASIC Expansion Mode While “EXPAND MDOE” is displaye d on the LCD Message Display, press the [PAUSE] key to enter the BASIC Expansion Mode. In the BASIC Expansion Mode, it is possible to execute the BASIC expansion mode program unde r the following conditions. • The BASIC expansion mode program has already been loaded. • The BASIC enable setting mode is selected. The basic expansion mode ends when the basic expansion program is exited. When “EXPAND MODE” appears, press the [PAUSE] key. When the [PAUSE] key is pressed, BASIC program is executed. EXPAND MODE NOTE : For the BASIC enable setting mode, refer to the B-852 Series Key Operation Specification stored in the CD-ROM.
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.9 Setting an Operating Environment E2-30 2.9.4 Automatic Calibration While “AUTO CALIB” is displayed on the LCD Message Display, press the [PAUSE] key to enter the Automatic Calibration Mode. In the Automatic Calibration Mode, whether to activate the automatic calibration at a power on time or not is selectable. When the automatic calibration is activated, the printer feeds the media for about 160 mm each time the power is turned on or the Top Cover is opened, to detect a print start position. When “AUTO CALIB” appears, press the [PAUSE] key. Use the [FEED] or [RESTART] key to select a desired option. After selecting the automatic calibration, press the [PAUSE] key. OFF OFF ON REFLECT [RESTART] [FEED] Not activated Activated (Feed gap sensor) ON TRANS. Activated (Black mark sensor) NOTES : 1. This function is available only when the media pitch is 10.0 mm to 150.0 mm. 2. When this function is activated, the media length, effective print length, and sensor type specified in the command are ignored. 3. When the printer cannot find a print start position properly, it will continue to feed the media for up to 500.0 mm. If that does not work, the printer will stop, resulting in a paper jam. 4. During an automatic calibration, the printer also feeds the ribbon.
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.9 Setting an Operating Environment E2-31 2.9.5 LAN Setting While “LAN” is displayed on the LCD Message Display, press the [PAUSE] key to enter the LAN Setting Mode. In the LAN Setting Mode, whether to enable the LAN communication and SNMP or not is selectable. When “LAN” appears, press the [PAUSE] key. Use the [FEED] or [RESTART] key to select a desired option. After selecting the LAN setting, press the [PAUSE] key. ON SNMP ON OFF ON SNMP OFF [RESTART] [FEED] LAN is disabled. LAN and SNMP are enabled ON SNMP ON LAN is enabled but SNMP is disabled.
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.9 Setting an Operating Environment E2-32 2.9.6 Real Time Clock Setting While “RTC SET” is displayed on the LCD Message Display, press the [PAUSE] key to enter the Real Time Clock Setting Mode. The Real Time Clock Setting Mode contains the following sub menus. Each time the [PAUSE] key is pressed, the sub menus are displayed sequentially. (1) Date setting (Year, Month, Day) (2) Time setting (Hour, Minute, Second) (3) Low battery check setting (4) RTC data renewal timing setting (1) Date Setting This parameter is to set the Year, Month, and Day, in order. When “RTC SET” appears, press the [PAUSE] key. Press the [PAUSE] key to set the date. After selecting the date, press the [PAUSE] key. (2) Time Setting This parameter is to set the Hour , Minute, and Second, in order. Press the [PAUSE] key to set the time. After selecting the time, press the [PAUSE] key. DATE 05/01/01 DATE Y 06/01/01 DATE M 06/ 03/01 DATE D 06/03/ 01 [PAUSE] [PAUSE] NOTE: Use the [FEED] or [RESTART] key to set the value. NOTE : The Real Time Clock Setting is effective only when an optional Real Time Clock, B-SA704-RTC-QM-R, is installed. TIME 00/00/00 TIME H 10/01/01 TIME M 10/ 30/01 TIME S 10/30/ 00 [PAUSE] [PAUSE] Year Month Day Hour Minute Second
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.9 Setting an Operating Environment E2-33 2.9.6 Real Time Clock Setting (Cont.) (3) Low Battery Check Setting This parameter is to choose whethe r to activate the low battery check function or not. Press the [PAUSE] key to set. After selecting the low battery check, press the [PAUSE] key. (4) RTC Data Renewal Timing Setting This parameter is to choose the RTC data renewal timing. Press the [PAUSE] key to set. After selecting the RTC data renewal timing, press the [PAUSE] key. The current date is displayed. Press the [FEED] and [RESTART] keys at the same time to return to the RTC SET display. LOW BATT. CHECK LOW BATT. ON [RESTART] [FEED] Low battery check is activated. Low battery check is not activated. LOW BATT. OFF RENEWAL RENEWAL BATCH [RESTART] [FEED] Batch print is possible. However, the same time is printed on the all media issued in a batch because the real time clock data is read only for the first media. A real time can be printed on each media. However, the printer needs to stop the motion before printing each media to read the real time clock data. RENEWAL PAGE NOTE : 1. Be sure to load the battery and set the low battery check function to ON whenever the real time clock is used. If the battery is not loaded or the battery voltage is low, the real time clock data is erased at the power off time. 2. When the low battery check function is set to ON and if the battery voltage is 2.4V or less, the printer will result in a “LOW BATTERY” error and stop at the power on time. In that case, hold down the [RESTART] key to restore to “RESET” display. DATE 06/03/01 RTC SET
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.10 Installing the Printer Drivers E2-34 2.10 Installing the Printer Drivers 2.10.1. Introduction This manual describes how to install the TOSHIBA printer driver for the TOSHIBA bar code printer on your Windows host computer; install and delete the printer driver, the procedure for adding the LAN port, cautions and limitations. The examples provided here illustrate the procedure for installing the printer driver version V7.0 for the B-SA4T series. 2.10.2. General Description (1) Features Once you install the TOSHIBA printer driver on your Windows host computer, you can use the TOSHIBA bar code printer, as well as the easy-to-use general printers. You can use this printer by connecting a parallel interface cable (printer cable), a USB cable, or a LAN cable to your host computer. (2) System Requirements To install the TOSHIBA printer driver on your host computer, the following system and environment are required: • Operating system: Windows 98, Windows Me, Windows 2000, Windows XP • Hardware: A DOS-/V (IBM PC/AT compatible) machine running an above operating system. • Interface: • Parallel interface conforming to the IEEE1284 standard • USB interface • LAN interface
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.10 Installing the Printer Drivers E2-35 2.10.3. Installing the Printer Driver The installation procedure differs depending on the interface connected to the printer and the operation system you are using. Please install the printer driver by performing the appropriate procedure. If the previous version of the printer driver has been installed on your host computer , be sure to uninstall it before you install this printer driver. (Refer to Section 2.10.4 Uninstalling the Printer Driver.) To print via your network, please install the printer driver by performing the installation procedure for the parallel interface, and also perform the following: 1. In the procedure, select “LPT1” for the port. 2. After installation of the printer driver is completed, add the LAN port by referring to Section 2.10.5 Adding/Deleting a LAN Port, and specify the LAN port. (1) Parallel Interface To use the parallel interface, the following settings are required, after installing the printer driver: For Windows 98/Me: Open the printer properties. Select the “Details” tab and click on the [Spool Settings…] button. The “Spool Settings” dialog box is displayed. Select “Disable bi-directional support for this printer”. For Windows 2000/XP: Open the printer properties and select the “Ports” tab. Mark off the “Enable bidirectional support” checkbox. NOTE: In case of the B-SX4T or B-SX5T series, make sure that the Centronics interface type is set to SPP (default).
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.10 Installing the Printer Drivers E2-36 (1) Select “Settings” – “Printers” from the “Start” menu to open the printer folder. (2) Double-click on the “Add Printer” icon. The Add Printer Wizard runs. Click on the [Next] button. (3) Select “Local printer”, then click on the [Next] button. The screen listing “Manufacturers and Printers” is displayed. (4) Click on the [Have Disk…] button. The “Install From Disk” dialog box is displayed. Specify the “\driver” folder in the CD-ROM drive, then click on the [OK] button. (5) Select the printer to be installed from “Printers” list, then click on the [Next] button. Driver name Model Driver name Model Driver name Model TEC B-372 B-372-QP TEC B-415 B-415-GH24-QM B-415-GH25-QM TEC B-419 B-419-GS10-QQ B-419-GS12-QP B-419-GS12-CN TEC B-431 B-431-GS10-QP B-431-GS10-CN TEC B-452 B-452-TS10-QQ B-452-TS10-QQ-US B-452-TS11-QQ-PAC B-452-TS12-QP B-452-TS12-QP-PAC B-452-TS12-CN TEC B-452H B-452-HS12-QQ B-452-HS12-QQ-US B-452-HS12-QP B-452-HS12-CN TEC B-472 B-472-QQ B-472-QQ-US B-472-GH12-QQ B-472-QP TEC B-472-CN B-472-GH12-CN B-472-GH14-CN TEC B-482 B-482-TS10-QQ B-482-TS10-QQ-US B-482-TS10-QP TEC B-492 B-492L-TH10-QQ B-492R-TH10-QQ B-492L-TH10-QP B-492R-TH10-QP TEC B-572 B-572-QQ B-572-QQ-US B-572-QP TEC B-672 B-672-QQ B-672-QQ-US B-672-QP TEC B-682 B-682-TS10-QQ B-682-TS10-QQ-US B-682-TS10-QP TEC B-852 B-852-TS12-QQ B-852-TS12-QQ-US B-852-TS12-QP TEC B-852-R B-852-TS22-QQ-R B-852-TS22-QP-R TEC B-872 B-872-QQ B-872-QQ-US B-872-QP TEC B-882 B-882-TS10-QQ B-882-TS10-QQ-US B-882-TS10-QP TEC B-SA4G B-SA4TM-GS12-QM-R B-SA4TP-GS12-QM-R TEC B-SA4T B-SA4TM-TS12-QM-R B-SA4TP-TS12-QM-R TEC B-SA4T- CN B-SA4TM-TS12-CN B-SA4TP-TS12-CN TEC B-SP2D B-SP2D-GH20-QM B-SP2D-GH30-QM B-SP2D-GH30-QM B-SP2D-GH20-QM-R B-SP2D-GH30-QM-R B-SP2D-GH30-QM-R TEC B-SV4 B-SV4D-GS10-QM B-SV4D-GH10-QM B-SV4D-GS10-QM-R B-SV4D-GH10-QM-R TEC B-SX4 B-SX4T-GS10-QQ B-SX4T-GS10-QQ-US B-SX4T-GS10-QP B-SX4T-GS20-QQ B-SX4T-GS20-QQ-US B-SX4T-GS20-QP B-SX4T-GS20-QM-R TEC B-SX4-CN B-SX4T-GS10-CN B-SX4T-GS20-CN TEC B-SX5 B-SX5T-TS12-QQ B-SX5T-TS12-QQ-US B-SX5T-TS12-QP B-SX5T-TS22-QQ B-SX5T-TS22-QQ-US B-SX5T-TS22-QP B-SX5T-TS22-QM-R TEC B-SX5-CN B-SX5T-TS12-CN B-SX5T-TS22-CN TEC B-SX6T-R B-SX6T-TS12-QM-R TEC B-SX8T-R B-SX8T-TS12-QM-R TEC CB-416- T3 CB-416-T3-QQ CB-416-T3-QQ-US CB-416-T3-QP TEC CB-426- T3 CB-426-T3-QQ CB-426-T3-QQ-US CB-426-T3-QP Windows 98/Me NOTE: The latest printer driver is available from the web site, “the Barcode Master”. (http://www.toshibatec-ris.com/products/barcode/download/index.html)
2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.10 Installing the Printer Drivers E2-37 (6) The screen to select the existing installed printer driver or use the new one, is displayed. Select “Replace existing driver”, then click on the [Next] button. If you install the printer driver for the first time, this screen is not displayed. (7) Select the port to be used for printing from the “Available ports” list, then click on the [Next] button. (8) Change the printer name if necessary, and select whether or not you use the printer as the default printer (“Yes” or “No”). Click on the [Finish] button. (9) The printer driver is installed. When installation is completed, the new printer icon is added in the “Printers” folder.