Toshiba D-r17dt User Manual

							11EN
IntroductionConnections Basic Setup Playback
EditingOthers Function Setup
Recording
Functional Overview
Front Panel
1 ON/STANDBY button
• Press to turn the unit on and off.
• If timer programmings have been set, press to 
set the unit in timer-standby mode.
2 Disc tray
• Place a disc when the disc tray is opened.
3A OPEN/CLOSE button*
• Press to open or close the disc tray.
4 Infrared sensor window
• Receive signals from your remote control so that 
you can control the unit from a distance.
5H (SKIP) button
• During playback, press once midway through a 
chapter or track to go back to the beginning of 
the current chapter or track. When pressed 
twice in quick succession, playback will start 
from the preceding chapter or track.
During playback, press and hold for 1.5 seconds 
to fast reverse.
When playback is paused, press to play reverse 
step by step.
When playback is paused, press and hold for 
1.5 seconds to  slow reverse.
6G (SKIP) button
• During playback, press to skip to the next 
chapter or track.
During playback, press and hold for 1.5 seconds 
to fast forward.
When playback is paused, press to play 
advance step by step.
When playback is paused, press and hold for 
1.5 seconds to slow forward.
7Display
• Refer to “Front Panel Display Guide” on 
page 18.
8HDMI indicator
• Lights up and indicates the HDMI output mode 
when HDMI output is on.
9 AUDIO input jacks (AV3)
• Use to connect external device with a RCA 
audio cable.
10 VIDEO input jack (AV3)
• Use to connect external device with a RCA 
video cable.
11 S-VIDEO input jack (AV3)
• Use to connect the S-video output of external 
device with an S-video cable.
12I REC button
• Press once to start a recording. Press 
repeatedly to start one-touch timer recording.
13B PLAY button*
• Press to start or resume playback.
14C STOP button
• Press to stop playback or recording.
• Press to stop timer recording.
1080pREC PLAY STOP SKIP1080i 720p 576p/480pDVD -RW/R +RW/R RECORDING
I/yOPEN/CLOSEON/STANDBY
S-VIDEO VIDEO L RAV 3
12
3*
56
9 10 11 14
13 *12 4
78
(*) The unit can also be turned on by pressing these buttons.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some 
operations can be carried out using the buttons on the front panel.
E7J70BD_EN.book  Page 11  Monday, May 7, 2007  3:31 PM 
						

							12EN
Rear Panel
1 ANTENNA IN (DVB-T)
• Connect to an antenna or cable to receive 
DVB-T signal.
2 ANTENNA OUT (DVB-T)
• Connect to the Aerial jack on your TV, cable box 
or direct broadcast system to output the signal 
received at ANTENNA IN (DVB-T). Use the 
supplied RF cable.
3 ANTENNA IN (ANALOG)
• Connect to an antenna or cable to receive 
analogue signal.
4 ANTENNA OUT (ANALOG)
• Connect to the Aerial jack on your TV, cable box 
or direct broadcast system to output the signal 
received at ANTENNA IN (ANALOG). Use the 
supplied RF cable.
5 COMPONENT VIDEO OUTPUT jacks
• Connect to the component video input jacks on 
your TV.
• Use a commercially available Component Video 
cable.
6 ANALOG AUDIO OUT jacks
• Connect to the audio input jacks on your TV. 
Use a commercially available Audio cable.
7 DIGITAL AUDIO OUTPUT (COAXIAL) jack
• Connect to an amplifier with a digital input jack 
such as a Dolby Digital decoder, DTS decoder 
or MPEG decoder. Use a commercially 
available Coaxial cable.
8 AV2 (DECODER) socket
• Connect to VCR, camcorder, or other 
Audio-Video equipment. Use a commercially 
available Scart cable.
9 HDMI OUT jack
• Connect to a display with an HDMI compatible 
port.
• Use a commercially available HDMI cable.
10 AV1 (TV) socket
• Connect to the Scart socket on your TV. Use a 
commercially available Scart cable.
11 Mains cable
• Connect to a standard AC outlet.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage 
to the unit.
• This unit does not have an RF modulator.
AV 2(
DECODER)
AV 1(
TV)ANALOG
AUDIO OUTCOMPONENT
VIDEO OUTPUTANALOG DVB-TOUTINANTENNA
PB/CB
PR/CR
YL
R
COAXIALDIGITAL AUDIO OUTPUT
PCM/BITSTREAMHDMI OUT
1342567911810
E7J70BD_EN.book  Page 12  Monday, May 7, 2007  3:31 PM 
						

							13EN
IntroductionConnections Basic Setup Playback
EditingOthers Function Setup
Recording
Remote Control
(*) The unit can also be turned on by pressing these 
buttons.
1 OPEN/CLOSE  button*
• Press to open or close the disc tray.
2 INPUT SELECT   button
• Press to select the DVB, analogue mode or 
appropriate input.
3 Number buttons
• Press to select channel numbers.
• Press to select a title / chapter / track on the 
display.
• Press to enter values for settings in the Setup 
menu.
• Press to enter the characters in edit function.
4 SETUP button
• Press to display the Setup menu in stop mode.
5 DISC MENU button
• Press to display the Disc menu during playback.
• Press to change the Original and Playlist on the 
TV screen. (VR mode only)
6 TOP MENU button
• Press to display the Title list.
7Direction U / D / L / P buttons
• Press to move the cursor and determine items 
or settings.
8 DISPLAY button
• Press to display the On-Screen Display.
9 RED/GREEN/YELLOW/BLUE button
• Press to follow the DVB instruction displayed 
on-screen.
10 REV r button
• During playback, press to fast reverse.
• When playback is paused, press to reverse 
slowly.
11 P L AY  P button*
• Press to start or resume playback.
12 SKIP B button
• During playback, press twice in quick 
successions to skip to the previous chapter or 
track.
• When playback is paused, press to play reverse 
step by step.
13 PAUSE p button
• Press to pause playback or recording.
14 TIME SLIP button
• Press once to start recording the TV programme 
you are watching. Press again to watch the 
content being recorded from the beginning while 
recording continues. (VR mode DVD-RW discs 
with the recording mode of LP, EP or SLP only)
15 ZOOM button
• During playback, press to enlarge the picture on 
the screen.
16 REPEAT button
• Press to select the repeat mode.
17 HDMI button
• Press to set the HDMI connectors video signal 
output mode.
18 ON / STANDBY button
• Press to turn on or off the unit.
• Press to set the unit in timer-standby mode. In 
the timer-standby mode, press to cancel the 
mode and to turn on the unit.
19 PROG.  /  buttons
• Press to change the channel up or down.
20 TIMER PROG. button
• Press to display the timer programme setting 
menu.
21 INFO  button
• Press to display the DVB programme 
information.
22 CLEAR button
• Press to clear the password once entered.
• Press to cancel the programming for a disc.
• Press to clear the selecting marker number in 
the marker setup mode.
• Press to clear the programme once entered in 
the timer recording setting mode.
OPEN/
CLOSE HDMI
.@ / :ABC DEF
GHI JKL MNOPROG.
PQRS TUV WXYZ
SPACE
TEXT
DISC MENU
TOP MENU GUIDE
DISPLAYRETURN
/BACK
FWD REVPLAY
SKIP SKIP STOP
PAUSE
SETUP
TIME SLIP 
ZOOMSAT.LINK REPEAT
INPUT
SELECT
RECREC MODE
CLEAR INFO
ENTER
/OK
SE-R0280
AUDIO
1.3x/0.8x
PLAYINSTANT
SKIP TIMER
PROG.
1*
17
18
19
22
24 23
26 25
28
30
32
34
27
20
21
29
31
33
35
3
54
6
7
2
8
9
11*
10
12
13
14
15
16
E7J70BD_EN.book  Page 13  Monday, May 7, 2007  3:31 PM 
						

							14EN
23 TEXT button
• Press to switch Teletext on or off, or transparent 
mode.
24 GUIDE button
• Press to call up the EPG list in DVB mode.
25 ENTER/OK button
• Press to acknowledge or approve a menu 
selection.
26 RETURN/BACK button
• Press to return to the previously displayed menu 
screen.
27 FWD f button
• During playback, press to fast forward.
• When playback is paused, press to forward 
slowly.
28 STOP S button
• Press to stop playing back or recording.
29 SKIP F button
• During playback, press to skip to the next 
chapter or track.
• When playback is paused, press to advance 
step by step.
30 1.3x/0.8x PLAY button
• During playback, press to playback in a slightly 
faster/slower speed while keeping the audio 
quality just as normal playback.
31 INSTANT SKIP button
• During playback, press to skip 30 seconds.
(See page 53.)
32 REC I button
• Press once to start a recording.
• Press repeatedly to start a One-touch Timer 
Recording.
33 REC MODE button
• Press to switch the recording mode.
34 AUDIO  button
• For analogue channels when receiving a 
bilingual broadcast, press to change the audio 
out setting to “Main”, “Sub” and “Main/Sub”.
• Press to change the bilingual audio source of an 
external equipment to “Main”, “Sub” or “Main/
Sub”. (Available only when the “External Input 
Audio” in the Setup menu is set to “Bilingual” in 
advance.)
• Press to display the audio menu during 
playback.
• Press to select the sound mode for DVB 
channels.
35 SAT.LINK button
• Press to call up the Satellite Link setting.
Installing Batteries in the 
Remote Control
Install two R6 (AA) batteries (supplied) into the 
remote control, carefully match with the polarity 
indicated inside the battery compartment.
Caution
• Incorrect use of batteries can result in hazards such 
as leakage and bursting. 
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
• Make sure that the plus and minus ends of each 
battery match the indications inside the battery 
compartment.
• Remove batteries if the equipment will not be used 
for a month or more.
• When disposing used batteries, please comply with 
governmental regulations or the public instructions 
for environmental protection that apply in your 
country or area.
• Do not recharge, short-circuit, heat, burn or 
disassemble batteries.
About the Remote Control
• Make sure there is no obstacle between the remote 
control and the remote control sensor on the unit.
• Use within the operating range and angle as shown.
• The maximum operable range as follows:
Line of sight:approximately 7 m
Either side of centre:approximately 7 m within
30 degrees
• Remote control operation may become unreliable if 
the remote control sensor of the unit is being 
exposed by the strong sunlight or fluorescent light.
• Remote controls for different devices can interfere 
with each other. Be careful when using remote 
controls for other equipment located close to the 
unit.
• Replace the batteries when the operating range of 
the remote control reduces.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly 
with the operations using the remote control. Some 
operations can be carried out using the buttons on 
the front panel.
213
DVD VIDEO RECORDER D-R17DT
Within 
about 7 m
Remote control
E7J70BD_EN.book  Page 14  Monday, May 7, 2007  3:31 PM 
						

							15EN
IntroductionConnections Basic Setup Playback
EditingOthers Function Setup
Recording
Guide to On-Screen Displays
DISPLAY Menu
With a disc inserted into the unit, press [DISPLAY] to 
display the On-Screen Display. The menu shows 
information about what is recorded on the disc.
This is an example screen for explanation. Displayed 
items vary depending on the actual mode.
1 Indicates a disc type and format mode.
2 Indicates a type of titles for VR mode 
DVD-RW disc.
3 Indicates a channel number or selected 
external input mode.
4 Indicates a recording mode and possible 
recording time left.
5 Indicates a title number, chapter number, 
elapsed time and total of disc playback.
6 Each icon means:
7 Indicates an operation status.
Note
• In some descriptions on this manual, only one disc 
type is indicated as an example.
Press [DISPLAY] while the On-Screen Display is 
displayed to display Title Name Information, File 
Name Information or HDMI Information.

(only when DVD+RW/+R, VR mode DVD-RW/-R, 
or unfinalised Video mode DVD-RW/-R disc is in 
playback)

(only when a CD with MP3/JPEG/DivX® files is in 
playback)
1 Displays title/file name.

(only for the images output through the HDMI 
output)
1 Indicates the resolution of the HDMI 
output image.
2 Indicates the HDMI video format.
3 Indicates the HDMI audio format.
• “- - -” will be displayed, when it does not have any 
information.
INFO Menu
Pressing the [INFO ] while you are viewing DVB 
channels to display the programme information.
1/   5 1/   5-RWVRORG0:01:00 / 1:23:45
SP 1:53
2 2 5 5
6 61
1
3
74
901
: Search 
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
Title NameMy Title111
DVB
File NameMy File111
Video Info.   :          480p  /  YCbCr
Audio Info.   :          Bitstream1112 2
3 3
Now: 00:00 KIDS KITCHEN
Next: 01:00 Fish18  :  CTV1 00:26
Multi-Audio Subtitles MHEG 16:9 For info press [INFO]
 
 
After 3 seconds, the window will be 
back to the previous screen.Press [INFO ]
EPG
Channel: CHILDREN
Open time:  00:00-01:00      
KIDS KITCHEN
It is a cooking competition of under twelve-year-old 
children. They should cook vegetable, meat or fish.
Even then never seen before. Winner will be a chef 
at famous restaurant in London for one day.
TimerNext
 
Press [INFO ], 
[RETURN/BACK] 
or [SETUP]
Press [INFO ]
E7J70BD_EN.book  Page 15  Monday, May 7, 2007  3:31 PM 
						

							16EN
Main Menu
Press [SETUP] to display the main menu. Then use 
[K / L] to select a menu and press [ENTER/OK] to 
display the sub menu. These menus provide entries 
to all main functions of the unit.
1 General Setting:
To go to General Setting menu.
2 Timer Programming:
To programme a timer recording.
3 Title List:
To call up the title list.
4DVD Menu:
To set up the DVD disc setting.
5 DVB Menu: 
To set up the DVB setting.
6 CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an 
audio CD, a video CD, a CD-RW/-R with MP3 / 
JPEG / DivX
® files is inserted into the unit.
1 Playback:
To set up the unit to play discs as you prefer.
2Display:
To set up the OSD screen as you prefer.
3Video:
To set up the video setting.
4 Recording:
To set up the unit to record to discs as you prefer.
5Clock:
To set up the clock of the unit as you need.
6Channel:
To adjust the channel setting of the unit as you prefer.
7DivX:
To set up the setting for the DivX® playback.
8HDMI:
To set up the HDMI connection setting.
9 Reset All:
To reset the setting to the factory default.
1 Adult Lock:
To set up the PINCODE for Adult Lock.
2 Language:
To set up the Language for audio subtitle and digital 
Teletext for DVB.
3 Service Preference:
To set whether you receive the Teletext or Subtitle 
information from the DVB.
4 About:
To check the current DVB system software version of 
this unit.
5 Reset All:
To reset the DVB Menu setting to default.


1 Format (DVD-RW, DVD+RW only):
Allows you to format the disc.
2 Finalise:
Allows you to finalise a disc containing recorded titles.
General Setting Menu
Setup
Timer Programming
Title List
DVD Menu
DVB Menu General Setting
1
2
3
4
51
2
3
4
5
CD Playback Mode66
HDMI
Reset All
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX1
2
3
4
5
6
7
8
9
DVB Menu
DVD Menu / CD Playback Mode
DVB Menu
Language
Service Preference
Reset All About Adult Lock1
2
3
4
5
DVD Menu
Format
Finalise
Disc Protect OFF      ONDelete All Playlists
1
2
3
4
CD Playback Mode
Random Play
Program Play
PBC (Video CD only)
Slide Show5
6
7
8
E7J70BD_EN.book  Page 16  Monday, May 7, 2007  3:31 PM 
						

							17EN
IntroductionConnections Basic Setup Playback
EditingOthers Function Setup
Recording3 Disc Protect (VR mode DVD-RW, 
DVD+RW/+R disc only):
Allows you to protect a disc from accidental editing or
recording.
4 Delete All Playlists (VR mode DVD-RW 
disc only):
Allows you to delete Playlist.
5Random Play:
Allows you to activate the random playback feature.
6 Program Play (audio CD/video CD only):
Allows you to activate the programme playback 
feature.
7 PBC (Video CD only):
Allows you to select images or information on the 
menu screen by activating PBC (playback control) 
function.
8 Slide Show (JPEG files only):
Allows you to select the display time of the slide show 
mode. 
E7J70BD_EN.book  Page 17  Monday, May 7, 2007  3:31 PM 
						

							18EN
Front Panel Display Guide
1 Current status of the unit
p :Appears when disc playback is paused.
Appears also during step by step 
playback.
B :Appears when playing back a disc.
 :Appears during slow forward playback.
:Appears when the timer programming or 
One-touch Timer Recording (OTR) is set 
and is operating.
Appears when the unit goes into the 
Satellite Link standby mode.
Flashes when all the timer programmes 
are finished.
Flashes when there is an error in 
programming. 
I:Appears when recording. 
Flashes when recording being paused.
:Appears when a disc is in this unit.
2 Title / Track and Chapter number
:Title / track number
:Chapter number
3 Displays the following
• Playing back time
• Current title / chapter / track number
• Recording time / remaining time
•Clock
• Channel number
• One-touch Timer Recording (OTR) remaining 
time
Display Messages
The disc tray is 
opening.
The PBC function 
of the Video CD is 
activated.
The disc tray is 
closing.A disc is loading.
Data is being 
recorded on a disc.
3
2
1
E7J70BD_EN.book  Page 18  Monday, May 7, 2007  3:31 PM 
						

							19EN
IntroductionConnectionsBasic Setup Playback
EditingOthers Function Setup
Recording
Connections
Connecting to a TV
Connect the unit to a TV after considering the 
capabilities of your existing equipment.
Before installation, plug off your TV and this unit.
Using the Scart socket
1Make a connection for the TV signal. 
Depending on the TV signal’s 
situation, choose one of following 
methods (A-C).
A: Receiving DVB-T signal:
If you are in a area that DVB-T signals are available, 
connect the antenna or cable to the ANTENNA IN 
(DVB-T) jack of this unit, then connect the ANTENNA 
OUT (DVB-T) jack of this unit to the Aerial jack of your 
TV. Use the supplied RF cable.
B: Receiving ANALOG signal:
If you are in a area that DVB-T signals are not 
available, connect the antenna or cable to the 
ANTENNA IN (ANALOG) jack of this unit, then 
connect the ANTENNA OUT (ANALOG) jack of this 
unit to the Aerial jack of your TV. Use the supplied 
RF cable.C: Receiving both DVB-T and ANALOG signal:
If you need to receive both DVB-T and ANALOG 
signal (for hotels that send out cable and DVB-T 
signals together etc.), connect the antenna or cable to 
the ANTENNA IN (DVB-T) jack of this unit, and 
connect the ANTENNA OUT (DVB-T) jack to the 
ANTENNA IN (ANALOG) jack of this unit, then 
connect the ANTENNA OUT (ANALOG) jack to the 
Aerial jack of your TV.
2After you made a connection for the 
TV signal, connect AV1 (TV) Scart 
socket of this unit to the Scart 
socket of your TV. Use a 
commercially available Scart cable.
Note
• If your TV does not have a Scart socket, use a 
commercially available Scart adaptor or Scart/RCA 
cable to connect.
• Connect this unit directly to the TV. If the AV cables 
are connected to a VCR, pictures may be distorted 
due to the copy protection system.
• When changing the “Video Out” setting (“SCART 
(RGB)”, “Component Interlace (I)” or “Component 
Progressive (P)”), connect to the corresponding jack 
on the TV. If the setting is changed, for example, to 
“Component Interlace (I)” or “Component 
Progressive (P)” while the scart cable is connected 
to the TV, a distorted video signal may be output.
Connections
ANALOAUD I O OCOMPONENT
VIDEO OUTPUTANALOG DVB-TOUTINANTENNA
PB/CBPR/CR
Y
Cable 
SignalAntenna
RF cable 
(supplied) RF cable
(not 
supplied)To Aerial jack of your TV
or
ANALOAUD I O OCOMPONENT
VIDEO OUTPUTANALOG DVB-TOUTINANTENNA
PB/CBPR/CR
Y
Cable 
SignalAntenna
RF cable 
(supplied)
RF cable
(not supplied)
To Aerial jack of your TV
or
ANALOAUDIO OCOMPONENT
VIDEO OUTPUTANALOG DVB-TOUTINANTENNA
PB/CBPR/CR
Y
Cable 
SignalAntenna
RF cable 
(not supplied)
RF cable
(supplied)
To Aerial jack of your TV
orRF cable (not supplied)
AV 2(
DECODER)
AV 1(
TV)ANALOG
AUDIO OUTNTPUT
L
RCOAXIALDIGITAL AUDIO OUTPUT
PCM/BITSTREAMHDMI OUT
Scart cable 
(not supplied) Audio/Video cable 
(not supplied)
Scart/RCA
cable
(not supplied)
Scart adaptor
(not supplied)
oror
E7J70BD_EN.book  Page 19  Monday, May 7, 2007  3:31 PM 
						

							20EN Selecting Progressive Scan (576p/480p or 
Interlaced 576i/480i) Playback
• If your TV is compatible with progressive scanning 
(576p/480p), connect the TV to the COMPONENT 
VIDEO OUTPUT jacks of this unit and set “Video 
Out” setting to “Component Progressive (P)” in the 
setup menu. (See page 74.) Next, set your TV to the 
progressive scan mode.
• If your TV is not compatible with progressive scan, 
set “Video Out” setting to “Component Interlace (I)”.
• Use a commercially available adaptor if the Video 
input jacks of your TVs or monitors are the BNC 
type.
Using the COMPONENT VIDEO OUTPUT 
jacks and the ANALOG AUDIO OUT jacks
If your TV has Component Video input jacks, use a 
Component Video cable, and an Audio Cable (to 
connect the ANALOG AUDIO OUT jacks).
• Component connection provides the better quality 
picture.
1Follow step 1 to 2 on page 19.
2Connect COMPONENT VIDEO 
OUTPUT jacks of this unit to the 
Component Video input jacks of your 
TV. Use a commercially available 
Component video cable.
3Connect the AUDIO OUT jacks of this 
unit to the analogue Audio input 
jacks of your TV. Use a commercially 
available Audio cable.
• After you have made the connections, set the “Video 
Out” setting. (See page 74.)
Note for a TV with no Scart socket:
• This unit has no RF modulator, so this type of TV 
cannot be used.
• Only component and HDMI connections are 
compatible with the Progressive Scan.
Connection to a TV with an HDMI 
Compatible Port
[HDMI CONNECTION]
A simple 1-cable connection with a device having an 
HDMI (high-definition multimedia interface) connector 
allows digital transfer of the digital images of 
DVD-video and other devices. This is the best method 
to connect this unit. It can minimise the deterioration 
of image quality.
Use the HDMI cable (commercially available) for 
connection.
Connect the HDMI output jack of this unit to the HDMI 
input jack of TV.
Selecting HDMI mode
Press [HDMI] to select the HDMI output mode. The 
output mode changes as follows every time [HDMI] is 
pressed. 576p (PAL)/480p (NTSC) → 720p → 1080i 
→ 1080p  (The HDMI mode that is not supported by 
display device will be skipped.)
Actual Output Modes by Media
For audio CD, video CD and MP3 files, 2 channel 
PCM will be output regardless of the “Dolby Digital” 
setting.
If the connected device is not compatible with HDMI 
BITSTREAM, audio will be output as PCM even if you 
select “Stream” in “Dolby Digital” setting (Refer to 
pages 71-72).
Copyright protection system
To play back the digital video images of a DVD via an 
HDMI connection, it is necessary that both the player 
and the display device (or an AV amplifier) support a 
copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is 
copy protection technology that comprises data 
encryption and authentication of the connected AV 
device. This unit supports HDCP. Please read the 
operating instructions of your display device (or AV 
amplifier) for more information.
*HDMI: High Definition Multimedia Interface
AV 2(
DECODER)
AV 1(
TVANALOG
AUDIO OUTCOMPONENT
VIDEO OUTPUTANALOG DVB-TOUTINANTENNA
PB/CBPR/CR
YL
RCOAXIALDIGITAL AUDIO OUTPUT
PCM/BITSTREAMHDMI OUT
YPB/CBPR/CR
Component 
Video INAUDIO IN
Audio cable
(not supplied) Component 
Video Cable 
(not supplied)
Audio recording format 
of the discDolby Digital 
setting of this unitActual output
DVD-videoDolby 
DigitalPCM 2channel PCM
Stream Dolby Digital
LPCMPCM
2channel PCM
St rea m
DivX
®
Dolby 
DigitalPCM 2channel PCM
Stream Dolby Digital
MP3 / MP2PCM
2channel PCM
St rea m
HDMI  IN
HDMI OUT
TVTo HDMI 
input jack
this unitHDMI cable (not supplied)
E7J70BD_EN.book  Page 20  Monday, May 7, 2007  3:31 PM