Toshiba D-r17dt User Manual

							51EN
Introduction Connections Basic SetupPlayback
EditingOthers Function Setup
Recording
Playing Back Discs Using the Disc 
Menu
A DVD contains a disc menu, which lists the contents 
and enables you to customise playback. The menu 
may offer choices for subtitle languages, special 
features, and chapter selection. Usually this 
information appears automatically when you start 
playback, but sometimes you need to press 
[DISC MENU] to display the menu.
1Press [DISC MENU].
If the feature is not available,   may appear on 
the TV screen.
2Select an item using [U / D / L / P], 
then press [ENTER/OK].
Repeat this step until all the features you want are 
set up or to start playing back the disc from the 
menu. The following operations are available.
[DISC MENU] button:
Displays the disc menu, which will vary among 
discs, and may be same with the Title menu.
[U / D / L / P] buttons:
Move the cursor from item to item on the screen.
[ENTER/OK] button:
Selects the currently highlighted menu option.
[the Number buttons]:
Selects a numbered menu option (available on 
certain discs).
3Press [DISC MENU] to exit the disc 
menu.
Note
• Menus vary among discs. Refer to the information 
accompanying the disc for details.
Playing Back a Disc Using the Title 
Menu
Some DVDs have a Title menu, which lists the titles 
available on the DVD. You can start playing back such 
discs at a specific title.
1Press [TOP MENU].
The Title menu will appear.
If the feature is not available,   may appear on 
the TV screen.
2Select a desired item using 
[U / D / L / P], then press 
[ENTER/OK].
The disc will start playing back at the title you 
selected. The following operations are available.
[TOP MENU] button:
Displays the DVD “Title Menu” which will vary 
between discs.
[U / D / L / P] buttons:
Move the cursor from item to item on the screen.
[ENTER/OK] button:
Selects the currently highlighted menu option.
[the Number buttons]:
Selects a numbered menu option (available on 
certain discs).
3Press [TOP MENU] to exit.
Note
•[TOP MENU] will not be available for some DVDs.
• Menus vary among discs. Refer to the information 
accompanying the disc for details.
DVD-V DVD-VDVD-V DVD-V
E7J70BD_EN.book  Page 51  Monday, May 7, 2007  3:31 PM 
						

							52EN
PBC Function for Video CDs
This unit conforms to ver.1.1 and ver.2.0 of the Video 
CD standard playback control (PBC) function. This 
enables you to play back interactive software using 
menu screens. Refer to the information 
accompanying the Video CD.
Ver.1.1 (without PBC function): You can still enjoy 
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “Pbc” will appear on the 
screen and display when playing back a Video CD 
with the PBC function.
Hint
• When playing back Video CDs with the PBC 
function, “Pbc” is displayed instead of the playing 
back time and current track indications on the front 
panel display. 
Note
• Some operations cannot be performed unless the 
function is cancelled either automatically or 
intentionally by you.
• Operations that are not available when the PBC 
function is set to “ON” are indicated by the following 
symbol in this manual:
Playing Back a Video CD Using the 
Title Menu
1When playing back a Video CD with 
the PBC function, the Title menu will 
appear automatically.
2Press [the Number buttons] to select 
the desired title.
Playback will start at the selected title.
3Press [RETURN/BACK] to go back to 
the Title menu.
Note
• While the On-Screen Display appears, you cannot 
perform steps 2 and 3.
Cancelling and Recalling the PBC 
Function
Insert a Video CD.
1In stop mode, press [SETUP].
2Select “CD Playback Mode” using 
[U / D], then press [ENTER/OK].
3Select “PBC (Video CD only)” using 
[U / D], then press [ENTER/OK].
4Select “OFF” using [U / D], then 
press [ENTER/OK].
5Press [SETUP] to exit.
To recall the PBC function, select “ON” at step 4 
above.
Note
• The default setting of “PBC (Video CD only)” is 
“ON”.
VCD VCD
VCDVCDVCD(PBC OFF)
VCD
VCD
VCDVCDVCD(PBC OFF)
CD Playback Mode
Random Play
Program Play
Slide Show
PBC (Video CD only)
E7J70BD_EN.book  Page 52  Monday, May 7, 2007  3:31 PM 
						

							53EN
Introduction Connections Basic SetupPlayback
EditingOthers Function Setup
Recording
Special Playback
Resume Playback
You can resume playback from the point where you 
stopped it before.
1During playback, press [STOP S].
The resume message will appear.
2Press [PLAY P].
In a few seconds, playback will resume from the 
point at which you stopped it before. Even if you 
turn off the unit, you can resume playback at the 
same point after turning back on the unit.
To cancel the resume playback and start playing 
back the disc from the beginning:
Press [STOP S] while playback is stopped.
Note
• For Video CDs, if you turn PBC on using the Setup 
menu, the resume function is cancelled.
• For MP3 and JPEG files, playback will resume from 
the beginning of the track at which playback was 
stopped.
Fast Forward / Fast Reverse
1During playback, press [FWD f] or 
[REV r].
Each time you press [FWD f] or [REV r], the 
approximate speed will change as follows.
Fast forward or fast reverse playback across titles 
(for DVDs) or tracks / files (for VCD / MP3 / DivX
®) 
is not possible.
• For Audio CDs and MP3 files approximate speed 
is fixed at x8 with sound.
• For Video CDs, approximate forward / reverse 
speeds are x2, x8 and x16.
•For DivX
® files, approximate forward speeds are 
x2, x20 and x40, and approximate reverse 
speeds are x5, x20 and x40.
• To return to playback at normal speed, press 
[PLAY P].
• Picture quality of DivX
® files in fast reverse is 
lower than that in fast forward.
• For some DivX
® files, Fast forward/Fast reverse 
may not function.
Hint
• Forward / reverse speeds are indicated with icons 
as follows.
Forward (Approx. Speed):
2x:   
20x: 
40x: 
Reverse (Approx. Speed):
5x:   
20x: 
40x: 
Skipping TV Commercials during 
Playback
To enjoy recorded programmes without any 
interruptions, press [INSTANT SKIP].
1During playback, press 
[INSTANT SKIP].
Normal playback will start 30-second advanced 
point from the point at which you press 
[INSTANT SKIP].
Each time you press [INSTANT SKIP], the start 
point will move another 30 seconds forward and 
playback resume automatically.
You can press [INSTANT SKIP] up to 6 times 
(180 seconds).
Pause
1During playback, press [PAUSE p].
Playback will pause with the sound muted.
2Press [PLAY P] to resume playback.
Rapid Playback
Rapid Play function is available only 
during playback.
Available only on discs recorded in the Dolby Digital 
format, Rapid Play plays back in a slightly faster/
slower speed while keeping the sound quality just as 
normal playback.
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCD(PBC OFF)MP3
MP3
JPEGJPEGJPEGDivXDivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCDMP3MP3MP3
DivXDivX®DivX®
REV FWD
REV FWD
REV FWD
REV FWD
REV FWD
REV FWD20x 2x 20x5x 40x 40xNormal
speed 
playback
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+R
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCDMP3MP3MP3
JPEGJPEGJPEGDivXDivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+R
E7J70BD_EN.book  Page 53  Monday, May 7, 2007  3:31 PM 
						

							54EN
1During playback, press 
[1.3x/0.8x PLAY].
Px0.8 : Press [1.3x/0.8x PLAY] once during 
playback.
Plays back approximately at 0.8 times of 
normal playback.
Px1.3 : Press [1.3x/0.8x PLAY] twice during 
playback.
Plays back approximately at 1.3 times of 
normal playback.
P:Press [1.3x/0.8x PLAY] thrice to play 
back in normal speed.
No effects.
2Press [PLAY P] to continue the 
normal playback.
Note
• Audio (language) setting cannot be changed while 
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during Rapid play mode.
• When you select “PAL” in “TV System” (see page 
73), this function is not available with discs recorded 
using the NTSC system.
Step by Step Playback
1During playback, press [PAUSE p].
2Press [SKIP B / F] repeatedly.
Each time you press [SKIP F], playback will go 
forward one frame (or step) at a time with the 
sound muted.
To go backward one frame (or step), press 
[SKIP B].
Press and hold [SKIP F] to continue going 
forward.
To continue going backward, press and hold 
[SKIP B].
3Press [PLAY P] to resume playback.
Note
• Only step by step forward is available when playing 
back Video CDs and discs with DivX® files.
Slow Forward / 
Slow Reverse Playback
1During playback, press [PAUSE p], 
then press [FWD f] or [REV r].
Each time you press [FWD f] or [REV r], the 
approximate speed change as follows. 
(The sound will remain muted.)
To return to normal playback, press [PLAY P].
Hint
• Forward / reverse speeds are indicated with icons 
as follows.
Forward (Approx. Speed):
1/16x: 
1/8x:   
1/3x:   
Reverse (Approx. Speed):
1/16x: 
1/8x:   
1/4x:   
Note
•For some DivX® files, Slow forward may not 
function.
• Only slow forward is available when playing back 
Video CDs and discs with DivX
® files.
Zoom
1During playback, press [ZOOM].
Four options are available, “x1.0”, “x1.2”, “x1.5” 
and “x2.0”. These are displayed excluding the 
current zoom rate.
Hint
• You can also select the zoom function by pressing 
[DISPLAY]. In this case, press [DISPLAY] first, 
select the   icon using [L / P], and then press 
[ENTER/OK] within 1 second, or wait for 1 second 
to display the selection menu.
2Select the desired zoom factor to 
zoom using [U / D], then press 
[ENTER/OK].
The zoom area is displayed.
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RVCDVCDVCDDivXDivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RVCDVCDVCDDivXDivX®DivX®
REV FWD
REV FWD
REV FWD
REV FWD
REV FWD
REV FWD1/8x1/16x1/8x1/16x1/3x1/4xPause
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RVCDVCDVCDJPEGJPEGJPEGDivXDivX®DivX®
1/   5 1/   5
DVD
× 1.2
× 1.5
× 2.0
0:01:00 / 1:23:45
Video
E7J70BD_EN.book  Page 54  Monday, May 7, 2007  3:31 PM 
						

							55EN
Introduction Connections Basic SetupPlayback
EditingOthers Function Setup
Recording3Select the desired zoom position 
using [U / D / L / P], then press 
[ENTER/OK].
Zoom playback will start.
Hint
• To exit the zoom menu, press [ZOOM] at step 1.
• To cancel the zoom function, select “x1.0” using 
[U / D], then press [ENTER/OK].
Note
• If selecting a smaller factor than that currently 
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG 
files.
Marker Setup
You can assign a specific point on a disc to return 
later.
1During playback, press [DISPLAY].
2Select the   icon using [L / P], 
then press [ENTER/OK] within 1 
second, or wait for 1 second to 
display the marker list.
Marker setup menu for DVD-Video
3Select the desired marker number 
using [U / D]. When the disc 
reaches the desired point, press 
[ENTER/OK].
The title (track) number and the time are 
displayed.
4To return to the marker, select the 
desired marker number using 
[U / D], then press [ENTER/OK].
Hint
• To clear a marker, select the marker number you 
wish to clear, then press [CLEAR].
• You can mark up to 6 points.
Note
• All markers are erased when you perform the 
following operations.
- Open the disc tray.
- Turn off the power.
- Record on a recordable disc.
- Change the mode between Original and Playlist. 
(VR mode)
Chasing Playback during Recording
You can play back the already recorded part of the 
currently recording programme without waiting for the 
recording to the end. This function works from 1 
minute after the start of the recording.
Make sure to use a DVD-RW disc in VR mode, and 
the recording mode is set to LP, EP or SLP.
1Press [PLAY B] during recording.
Playback will start from the beginning of the 
programme that you are currently recording.
Screen for the current playback:
If you play the fast forward playback and the 
playback reaches the scene recorded 1 minute 
before, the forwarding playback will automatically 
return to the normal playback.
2To stop the playback, press [STOP C] 
once.
The resume message will appear.
Screen for the current recording:
To stop recording, press [STOP 
C] again.
To cancel the resume, press [STOP C] again.
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCD(PBC OFF)
1/   5 1/   5
DVD
---
---
---
---
---
---123456
0:01:00 / 1:23:45
Video
DVD-RW DVD-RWVR
1/   5 1/   50:01:00 / 1:23:45
-RWVRORG
901
1/   5 1/   50:01:00 / 1:23:45
LP 1:01Resume ON
-RWVRORG
E7J70BD_EN.book  Page 55  Monday, May 7, 2007  3:31 PM 
						

							56EN
Using the [TIME SLIP] button
With [TIME SLIP] button, even if you leave your 
couch while you are watching TV through this unit, 
you can come back and watch rest of the programme 
from right where you left at any convenient time with 
just one button. Please make sure to put VR mode 
DVD-RW disc, and set the recording mode to LP, EP 
or SLP.
1While viewing a TV broadcast via 
this unit, press [TIME SLIP].
This unit start to record the TV broadcast.
2Press [TIME SLIP] again.
Playback will start from the point you press 
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can 
pause and resume the playback by pressing 
[TIME SLIP].
3To stop the recording, press 
[STOP
C] twice.
Note
• Playback image may freeze momentarily using this 
function. However this does not affect the recording.
• The 2x fast forward playback is not available.
•[REC
I] is not available during this function.
• You must cancel this function first by pressing 
[STOP
C] once. Then you can use [RECI] to use 
OTR (one-touch timer recording) function or change 
recording time for the OTR.
• “Wait for a moment.” will be displayed on the screen 
if you press [PLAY 
B] before 1 minute of recording.
• This function is available only when you are 
recording on a DVD-RW disc in VR mode, with 
the recording mode LP, EP or SLP.
• Use DVD-RW disc capable of 2x or 4x speed 
recording. 
Simultaneous Playback and 
Recording
You can also play back a recorded title during current 
recording or the Timer Recording on the same disc.
1Press [DISPLAY] during recording.
The resume message will appear.
Screen for the current recording:
2Select   icon using [L / P], then 
press [ENTER/OK].
The title number next to   will be highlighted.
Title:
Enter a desired title number to search using 
[
U / D] or [the Number buttons], then press 
[ENTER/OK].
Selected title playback will start.
Chapter:
To move to   for chapter, press [
B].
Enter a desired chapter number to search 
using [
U / D] or [the Number buttons], then 
press [ENTER/OK].
Selected chapter playback will start.
If you play the currently recording programme and the 
playback reaches the scene recorded 1 minute 
before, the forwarding playback will automatically 
return to the normal playback.
3Press [STOP C] once to stop 
playback.
The resume message will appear.
Screen for the current recording:
To stop recording, press [STOP 
C] again.
To cancel the resume, press [STOP C] again.
Note
• Playback image may freeze momentarily using this 
function. However this does not affect the recording.
• The 2x fast forward playback is not available.
• This function is available only when you are 
recording on a DVD-RW disc in VR mode, with 
the recording mode LP, EP or SLP.
• Only the titles (chapters) in the Original can be 
selected. You cannot select titles from the Title List.
• When you stop the playback after the Timer 
recording is completed, the unit will be switched to 
the timer standby mode if another programme has 
been set (refer to “Hints for the Timer Recording” on 
page 41).
• Use DVD-RW disc capable of 2x or 4x speed 
recording. 
DVD-RW DVD-RWVR
901
1/   5 1/   50:01:00 / 1:23:45
-RWVRORG
1/   5 1/   50:01:00 / 1:23:45
LP 1:01Resume ON
-RWVRORG
901
E7J70BD_EN.book  Page 56  Monday, May 7, 2007  3:31 PM 
						

							57EN
Introduction Connections Basic SetupPlayback
EditingOthers Function Setup
Recording
Search
Title / Chapter Search
Using [SKIP B / F] buttons
1During playback, press [SKIP F] to 
skip the current title or chapter and 
move to the next.
The unit moves to the next title or chapter one 
after the other.
To go back to the previous title or chapter, press 
[SKIP B] twice in quick successions.
Using the [DISPLAY] button
1During playback, press [DISPLAY].
2Select the   icon using [L / P], 
then press [ENTER/OK].
 for the title number is highlighted.
Searching for a Title:
3Enter the desired title number to 
search for using [U / D] or 
[the Number buttons], then press 
[ENTER/OK].
Title search will start.
Hint
• Total number of chapters and playback time of the 
selected title are also displayed.
Searching for a Chapter:
3Press [L / P] to highlight the number 
displayed in the right side of the   
icon.
4Enter the desired chapter number to 
search for using [U / D] or 
[the Number buttons], then press 
[ENTER/OK].
Chapter search will start.
Hint
• The title number and playback time of the selected 
chapter are also displayed.
Track Search
Using [SKIP B / F] buttons
1During playback, press [SKIP F] to 
skip the current track and move to 
the next.
The unit moves to the next track one after the 
other.
To go back to the previous track, press 
[SKIPB] twice in quick successions. The unit 
moves backward one track at a time.
Using the [DISPLAY] button
For audio CD, skip to step 2.
1During playback, press [DISPLAY].
2Select the   icon using [L / P], 
then press [ENTER/OK].
 for the track number is highlighted.
3Enter the desired track number to 
search for using [U / D] or 
[the Number buttons], then press 
[ENTER/OK].
Track search will start.
Hint
• For Video CDs, you can perform the track search 
function in stop mode without turning PBC off 
manually.
Note
• During Random playback or Programme playback, 
you cannot search the desired track.
Direct Search
You can search the desired track directly.
Using [the Number buttons]
1During playback, if the display menu 
is not displayed, press 
[the Number buttons] to enter the 
desired track number.
Note
• During Random playback or Programme playback, 
you cannot search the desired track directly.
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+R
CDCDCDVCDVCDVCD(PBC OFF)MP3
MP3JPEGJPEGJPEGDivXDivX®DivX®
CD
CD
E7J70BD_EN.book  Page 57  Monday, May 7, 2007  3:31 PM 
						

							58EN
Time Search
For audio CD, skip to step 2.
1During playback, press [DISPLAY].
2Select the   icon using [L / P], 
then press [ENTER/OK].
 for the title or track number is highlighted.
3Press [L / P] to highlight  .
4Enter the desired time to search for 
using [U / D] or 
[the Number buttons], then press 
[ENTER/OK].
Time search will start.
Note
• During Random playback or Programme playback, 
you cannot search the desired time.
• The title number and chapter number of the setting 
time are also displayed.
• Time search function is available only in the same 
track or title.
• If the time search is not available, there is no 
display.
Repeat / Random / Programme 
Playback / Slide Show
Repeat Playback
For audio CD or MP3, skip to step 2 or press 
[REPEAT] and skip to step 3.
1During playback, press [DISPLAY].
Or press [REPEAT] during playback, and follow 
from step 3.
2Select the   icon using [L / P], then 
press [ENTER/OK] within 1 second, 
or wait for 1 second to display the 
selection menu.
3Select the desired option to repeat 
using [U / D], then press 
[ENTER/OK].
The selected repeat playback will start.
The following operations are available.
Title:
The current title will be played back repeatedly. 
(DVD only)
Chapter:
The current chapter will be played back 
repeatedly. (DVD only)
All:
The current disc will be played back repeatedly. 
(DVD-RW (VR mode), Audio CD, Video CD, MP3, 
JPEG and DivX
® only)
A-B:
The A-B point will be played back repeatedly.
(DVD, Audio CD, Video CD and DivX
® only)
When pressing [ENTER/OK] while A-B is 
highlighted, A-B repeat is set.
•Press [ENTER/OK] again to decide the starting 
point (A).
•Press [ENTER/OK] after setting point (A) to 
select the ending point (B).
Track:
The current track will be played back repeatedly. 
(Audio CD, Video CD, MP3, JPEG and DivX
® 
only)
Group:
The current group will be played back repeatedly. 
(MP3, JPEG (except Picture CD) and DivX
® only)
Hint
• To cancel the repeat playback, select “OFF” at step 
3. The repeat setting is also cancelled when you 
stop playback.
• You can also select the repeat playback by pressing 
[REPEAT].
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCD(PBC OFF)DivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDVCDVCDVCD(PBC OFF)MP3
MP3
JPEGJPEGJPEGDivXDivX®DivX®
E7J70BD_EN.book  Page 58  Monday, May 7, 2007  3:31 PM 
						

							59EN
Introduction Connections Basic SetupPlayback
EditingOthers Function Setup
Recording
Note
• You can only set A-B repeat playback within the 
current title (for DVDs) or current track (for Audio 
CDs, Video CDs and discs with DivX
® files).
• You cannot select “Group” during the random 
playback of MP3 and JPEG files.
• Chapter / Track repeat function is cancelled 
whenever [SKIP B / F] is pressed.
• For some DivX
® files, A-B Repeat playback may not 
function.
• For Video CDs with PBC function, repeat play does 
not work while the PBC function is on.
Random Playback
You can use this function to play back a disc randomly 
instead of in the recorded order.
1In stop mode, press [SETUP].
2Select “CD Playback Mode” using 
[U / D], then press [ENTER/OK].
CD Playback Mode menu will appear.
3Select “Random Play” using [U / D], 
then press [ENTER/OK].
Random playback will start.
Hint
• To cancel random playback, press [STOP S] twice 
during random playback. “OFF” appears on the 
screen.
• For Video CDs with PBC function, the PBC setting 
will be switched to off automatically when you start 
random playback.
Note
• During random playback, if you forward the track to 
the end, the playback speed of the next track will be 
normal.
• During random playback, you cannot use the search 
function except for the search with [SKIP B / F].
By pressing [SKIP B], you can return only to the 
beginning of the current track.
Programme Playback
You can programme the disc to play back in your 
desired order.
1Follow steps 1 and 2 in “Random 
Playback”.
2Select “Program Play” using [U / D], 
then press [ENTER/OK].
3Select the desired track using 
[U / D], then press [ENTER/OK] or 
[P].
4Press [PLAY P] to start programme 
playback.
Hint
• To erase tracks you selected, press [CLEAR].
• You can make up to 50 track settings.
• To cancel programme playback, press [STOP S] 
twice during programme playback. “OFF” appears 
on the screen.
• You may also select the desired track using 
[the Number buttons] at step 3.
• For Video CDs with PBC function, the PBC setting 
will be switched to off automatically when you start 
programme playback.
Note
• During programme playback, if you forward the track 
to the end, the playback speed of the next track will 
be normal.
• During programme playback, you cannot use the 
search function except for the search with 
[SKIPB / F].
Slide Show
You can select the display time between 5 seconds 
and 10 seconds.
1Follow steps 1 and 2 in “Random 
Playback”.
2Select “Slide Show” using [U / D], 
then press [ENTER/OK].
3Select the display time using 
[U / D], then press [ENTER/OK].
4Press [SETUP] to exit.
Note
• Large-size JPEG files take a few moments to be 
displayed.
CD CDVCDVCDVCD(PBC OFF)MP3
MP3JPEGJPEGJPEG
CDCDCDVCDVCDVCD(PBC OFF)
CD Playback Mode
Program Play
0:00:00 To t a l --
--------------------------------------------------------------------------------------------------
JPEG JPEG
E7J70BD_EN.book  Page 59  Monday, May 7, 2007  3:31 PM 
						

							60EN
Selecting the Format of Audio 
and Video
You can select the format of audio and video to suit 
the content of the disc you are playing back.
Switching Subtitles
Many DVD-Videos have subtitles in one or more 
languages. The available languages are usually 
printed on the disc case. You can switch subtitle 
languages at any time during playback.
1During playback, press [DISPLAY].
2Select the   icon using [L / P], then 
press [ENTER/OK] within 1 second, 
or wait for 1 second to display the 
selection menu.
3Select the desired subtitle language 
using [U / D], then press 
[ENTER/OK].
Subtitles are displayed in the selected language.
If you select “OFF”, subtitles will disappear.
Note
• With some discs it is only possible to change the 
subtitle language from the disc menu. Press 
[TOP MENU] or [DISC MENU] to display the disc 
menu.
• If a 4-digit language code appears in the subtitle 
menu at step 3, refer to the “Language Code” on 
page 82. 
• For discs with DivX
® files, the screen only displays 
the number of subtitle languages.
Switching Audio Soundtrack
When playing back a DVD-Videos recorded with two 
or more soundtracks (often in different languages), 
you can switch among them during playback.
When playing back DVD-RW discs recorded in VR 
mode, you can switch to main audio (L), sub audio (R) 
or a combination of both (L / R).
When playing back Audio CDs or Video CDs, you can 
switch among the left, the right channel and stereo.
For audio CD, skip to step 2 or press [AUDIO ] 
and skip to step 3.
1During playback, press [DISPLAY].
Or press [AUDIO ] during playback and follow 
from step 3.
2Select the   icon using [L / P], then 
press [ENTER/OK] within 1 second, 
or wait for 1 second to display the 
selection menu.
3Select a desired audio soundtrack or 
audio channel using [U / D], then 
press [ENTER/OK].
With a DVD Video, VR mode DVD-RW, or DivX® 
files:
Audio soundtrack will switch.
Example:
English → Spanish → French
If the title contains both main and sub audio, you 
can further select L (main), R (sub), L/R (mixed of 
main and sub).
With an Audio CD or Video CD:
The Audio channel will switch.
Example:
L/R → L → R
Note
• For some discs, it is only possible to change the 
soundtrack from the disc menu. Press [TOP MENU] 
or [DISC MENU] to display the disc menu.
Switching Virtual Surround System
You can enjoy stereophonic virtual space through 
your existing 2 channel stereo system.
For audio CD or MP3, skip to step 2.
1During playback, press [DISPLAY].
Display menu will appear.
2Select the   icon using [L / P], then 
press [ENTER/OK] within 1 second, 
or wait for 1 second to display the 
selection menu.
Virtual Surround menu will appear.
e.g.) DVD-Video
3Select “OFF”, “Type 1” or “Type 2” 
using [U / D], then press 
[ENTER/OK].
e.g.) DVD-Video
• OFF: No effect
• Type 1: Natural effect
• Type 2: Emphasised effect
Note
• Select Virtual Surround to “OFF” in a case the sound 
is distorted.
• The setting will be kept “OFF” when the unit is 
turned off.
DVD-V DVD-VDVD-RW DVD-RWVRDVD+RW DVD+RWDDVD+RVD+RDVD+R
DivXDivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVRCD
CDVCDVCDVCDDivX®DivX®
DVD-V DVD-VDVD-RW DVD-RWVideoDVD-RW DVD-RWVRDVD-R DVD-R
DDVD+RVD+RWWDVD+RWDDVD+RVD+RDVD+RCDCDCDMP3MP3MP3
1/   5 1/   5
DVD
0:01:00 / 1:23:45
Video
1/   5 1/   5
DVD
0:01:00 / 1:23:45
OFF
Ty p e  1
Ty p e  2
Video
E7J70BD_EN.book  Page 60  Monday, May 7, 2007  3:31 PM