Toshiba D Vr7kc2 Owner Manual
Here you can view all the pages of manual Toshiba D Vr7kc2 Owner Manual. The Toshiba manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 21
21EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Connecting to a TV Using Component Video Out Jacks rear of this unitRF coaxial cable RCA audio cable AUDIO IN S-VIDEO IN OUT IN ANTENNA VHF / UHFantenna cable TV company or ANT. INThis connection is for TV loop through only S-VIDEO OUTAUDIO OU T S-video cable RF coaxial cable DVD / VCR Y P B/CB PR/CR COMPONENT VIDEO OUTAUDIO OU T L R rear of this unit OUT IN ANTENNA VHF / UHFantenna...
Page 22
![Page 22
22 EN
HDMI Video Resolution and Actual Output Signals
Press [HDMI] to select the HDMI video resolution. The video resolution mode changes a\
s follows every time [HDMI] is
pressed.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
Note
Some devices with an HDMI input may not operate properly with this unit.\
When using an HDCP-incompatible display device, the image...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-21.png "Page 22
22 EN
HDMI Video Resolution and Actual Output Signals
Press [HDMI] to select the HDMI video resolution. The video resolution mode changes a\
s follows every time [HDMI] is
pressed.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
Note
Some devices with an HDMI input may not operate properly with this unit.\
When using an HDCP-incompatible display device, the image...")
22 EN HDMI Video Resolution and Actual Output Signals Press [HDMI] to select the HDMI video resolution. The video resolution mode changes a\ s follows every time [HDMI] is pressed. Front Panel Display Video Output Signal 480 Progressive Press [HDMI] 720 Progressive Press [HDMI] 1080 interlaced Press [HDMI] 1080 Progressive Press [HDMI] Note Some devices with an HDMI input may not operate properly with this unit.\ When using an HDCP-incompatible display device, the image...
Page 23
![Page 23
23EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Note
Required cables and connecting methods differ depending on the cable/sat\
ellite box.
For more information, please contact your cable/satellite provider.
Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO O\
UT jack, COMPONENT VIDEO OUT jacks or HDMI OUT jack for connecting to your TV.
With this setup:
You can record any unscrambled channel by selecting...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-22.png "Page 23
23EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Note
Required cables and connecting methods differ depending on the cable/sat\
ellite box.
For more information, please contact your cable/satellite provider.
Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO O\
UT jack, COMPONENT VIDEO OUT jacks or HDMI OUT jack for connecting to your TV.
With this setup:
You can record any unscrambled channel by selecting...")
23EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Note Required cables and connecting methods differ depending on the cable/sat\ ellite box. For more information, please contact your cable/satellite provider. Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO O\ UT jack, COMPONENT VIDEO OUT jacks or HDMI OUT jack for connecting to your TV. With this setup: You can record any unscrambled channel by selecting...
Page 24
24 EN Note RF modulator is not supplied with this unit. You need to purchase it at your local store. The quality of picture may become poor if this unit is connected to an RF modulator. Connecting to a TV without Audio / Video Jacks ANT. IN rear of this unit RCA audio cable RCA video cable L R I N --- A U D I O -- OU T IN --- VIDEO --- OUT AUDIO IN ANT. IN TO TVLRCHANNEL 43VIDEO IN RF modulator (not supplied) OUT IN ANTENNA RF coaxial cable Set channel 3 or 4 Set channel 3 or 4 RF coaxial cable...
Page 25
![Page 25
25EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Note
The audio source on a disc in a Dolby Digital multi channel surround for\
mat cannot be recorded as digital sound by
an MD or DAT deck.
By connecting this unit to a Dolby Digital decoder, you can enjoy high-q\
uality Dolby Digital multi channel surround sound as heard in the movie theaters.
By connecting this unit to the DTS decoder, you can enjoy Multi-channel \
Surround...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-24.png "Page 25
25EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Note
The audio source on a disc in a Dolby Digital multi channel surround for\
mat cannot be recorded as digital sound by
an MD or DAT deck.
By connecting this unit to a Dolby Digital decoder, you can enjoy high-q\
uality Dolby Digital multi channel surround sound as heard in the movie theaters.
By connecting this unit to the DTS decoder, you can enjoy Multi-channel \
Surround...")
25EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Note The audio source on a disc in a Dolby Digital multi channel surround for\ mat cannot be recorded as digital sound by an MD or DAT deck. By connecting this unit to a Dolby Digital decoder, you can enjoy high-q\ uality Dolby Digital multi channel surround sound as heard in the movie theaters. By connecting this unit to the DTS decoder, you can enjoy Multi-channel \ Surround...
Page 26
![Page 26
26 EN
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these \
steps after you have completed all the connections.
1
Press [I/yy ON/STANDBY].
Before:
Turn the TV on. Select the input to
which the unit is connected.
2
Use [K / L] to select your desired language, then press [ENTER] to set
language.
Initial Setting
OSD LanguageEnglish
Français Español
Select the language for Setup display.
3
Press [ENTER] to start “Channel Preset”.
Auto Preset will scan Analog...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-25.png "Page 26
26 EN
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these \
steps after you have completed all the connections.
1
Press [I/yy ON/STANDBY].
Before:
Turn the TV on. Select the input to
which the unit is connected.
2
Use [K / L] to select your desired language, then press [ENTER] to set
language.
Initial Setting
OSD LanguageEnglish
Français Español
Select the language for Setup display.
3
Press [ENTER] to start “Channel Preset”.
Auto Preset will scan Analog...")
26 EN INITIAL SETTING When you turn on this unit for the first time, you need to follow these \ steps after you have completed all the connections. 1 Press [I/yy ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. 2 Use [K / L] to select your desired language, then press [ENTER] to set language. Initial Setting OSD LanguageEnglish Français Español Select the language for Setup display. 3 Press [ENTER] to start “Channel Preset”. Auto Preset will scan Analog...
Page 27
![Page 27
27EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program av\
ailable channels in your area with the
following procedures.
1
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Channel”, then press [ENTER].
“Channel” menu will appear.
3
Use [K / L] to select “Auto Channel Preset”, then press...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-26.png "Page 27
27EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program av\
ailable channels in your area with the
following procedures.
1
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Channel”, then press [ENTER].
“Channel” menu will appear.
3
Use [K / L] to select “Auto Channel Preset”, then press...")
27EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CHANNEL SETTING If you have changed antenna connection, we recommend that you program av\ ailable channels in your area with the following procedures. 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2 Use [K / L] to select “Channel”, then press [ENTER]. “Channel” menu will appear. 3 Use [K / L] to select “Auto Channel Preset”, then press...
Page 28
![Page 28
28 EN
CHANNEL SETTING
1
Press [SETUP] and use [K / L] to select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Channel”, then press [ENTER].
“Channel” menu will appear.
3
Use [K / L] to select “Manual Channel Preset”, then press [ENTER].
“Manual Channel Preset ” menu will appear.
4
Select the channel number to add or delete.
• Use [CH / ] to cycle through only the
memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-27.png "Page 28
28 EN
CHANNEL SETTING
1
Press [SETUP] and use [K / L] to select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Channel”, then press [ENTER].
“Channel” menu will appear.
3
Use [K / L] to select “Manual Channel Preset”, then press [ENTER].
“Manual Channel Preset ” menu will appear.
4
Select the channel number to add or delete.
• Use [CH / ] to cycle through only the
memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use...")
28 EN
CHANNEL SETTING
1
Press [SETUP] and use [K / L] to select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Channel”, then press [ENTER].
“Channel” menu will appear.
3
Use [K / L] to select “Manual Channel Preset”, then press [ENTER].
“Manual Channel Preset ” menu will appear.
4
Select the channel number to add or delete.
• Use [CH / ] to cycle through only the
memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use...
Page 29
29EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SETTING THE CLOCK Auto Clock Setting This unit can set the time and date automatically by referring to a channel that carries a clock information. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” on this page. If not, follow “Manual Clock Setting” on page 30. Make sure • The antenna/cable TV connections are correct. • Channels are...
Page 30
![Page 30
30 EN
SETTING THE CLOCK
1
Press [SETUP] and use [K / L] to select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Clock”, then press [ENTER].
“Clock” menu will appear.
3
Use [K / L] to select “Daylight Saving Time”, then press [ENTER].
4
Use [K / L] to select “ON (MAR - NOV)”, “ON (APR - OCT)” or “OFF”,
then press [ENTER].
Daylight Saving Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
ON (MAR - NOV):
Move forward one hour on the second Sunday in
March and move back one hour on the first...](http://img.usermanuals.tech/thumb/76/103583/w300_d_1513603776-toshiba-d-vr7kc2-owner-manual_d-29.png "Page 30
30 EN
SETTING THE CLOCK
1
Press [SETUP] and use [K / L] to select “General Setting”, then press
[ENTER].
2
Use [K / L] to select “Clock”, then press [ENTER].
“Clock” menu will appear.
3
Use [K / L] to select “Daylight Saving Time”, then press [ENTER].
4
Use [K / L] to select “ON (MAR - NOV)”, “ON (APR - OCT)” or “OFF”,
then press [ENTER].
Daylight Saving Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
ON (MAR - NOV):
Move forward one hour on the second Sunday in
March and move back one hour on the first...")
30 EN SETTING THE CLOCK 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2 Use [K / L] to select “Clock”, then press [ENTER]. “Clock” menu will appear. 3 Use [K / L] to select “Daylight Saving Time”, then press [ENTER]. 4 Use [K / L] to select “ON (MAR - NOV)”, “ON (APR - OCT)” or “OFF”, then press [ENTER]. Daylight Saving Time ON (MAR - NOV) ON (APR - OCT) OFF ON (MAR - NOV): Move forward one hour on the second Sunday in March and move back one hour on the first...