Toshiba D Vr7kc2 Owner Manual

41EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
1
 Press [I/yy ON/STANDBY].
Turn on the TV and be sure to select the input to 
which the unit is connected.
Press [DVD].
2
 Press [OPEN/CLOSE  A] to open the 
disc tray and insert your disc with its 
label facing up.
Align the disc to 
the disc tray guide.
3
 Press [OPEN/CLOSE  A] to close the 
disc tray.
It may take awhile to load 
the disc...

42 EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
7
 Press [STOP C] to stop recording.
The recorded title will be included in the title list. 
(Refer to “Guide to a Title List” on page 70.)
Wait for a moment  90%
This operation may take 
awhile to be completed.
6
 Press [REC  I] to start recording.
“I” will be displayed for 5 seconds.
   ISP 1:53
Press [PAUSE  F] to pause recording. 
Press  [PAUSE  F] or  [REC  I] again to restart 
recording.
To set one-touch timer recording (OTR)...
This is a simple way...

43EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
TIMER RECORDING
You can program the unit to record up to 12 programs 
within a month in advance. Daily or weekly program 
recordings are also available.
Before recording, make sure
•  Set the clock before setting a timer programming. 
•  Insert a recordable disc with enough recordable space or 
a cassette tape with an erase-protection tab.
Note
•   If you have not set the clock yet:...

44 EN
4
 Use [K / L / { / B] or [the Number buttons] to enter the start and end 
time, then press [B].
Date
SP 2 : 00StartEnd
- - : - -
Mode SP
CH REC To
10 DVD
JAN/021 : 00AM
•  You cannot make a program which recording 
time exceeds 12 hours.
5
 Use [K / L] to select channel number 
or external input (L1 / L2), then press 
[B].
Date
SP 1 : 00StartEnd
ModeSP
CH REC To
DVD
JAN/02 2 : 00AM
1 : 00AM10
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Date
SP 1 : 00StartEnd...

45EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
 Checking, canceling, or correcting the timer 
programming information
If the timer program did not complete correctly, 
the error number appears in the timer
programming list.
1) Press [TIMER SET].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming
1/1
THU JAN/01 10:00AM
SP  (1:00) JAN/  2/09  1:00 AM 125-01 SP
   Date  Start  End  CH...

46 EN
TIMER RECORDING
Hints for Timer Recording
PROG. A
PROG. B
actual
recording 
PROG. B
When the starting time is the same:
A program set previously (PROG. A) has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording PROG. A
PROG. APROG. C
PROG. C
When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording...

47EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SETTINGS FOR AN EXTERNAL DEVICE
 Connection to an External Device
1
 Press [SETUP]. 
2
 Use [K / L] to select “General 
Setting”, then press [ENTER].
Supplied cables used in this connection are as follows:
• RCA  audio  cable (L/R) x 1
•  RCA video  cable x 1
Please p urchase  the rest  of the  necessary  cables at your l ocal store.
3
 Use [K / L] to select “Video”, then 
press...

48 EN
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
1
  Turn on the TV and press [I/
yy ON/STANDBY], and be sure to 
select the input of the TV to which 
the unit is connected.
2
  When you want to record to the disc:  Press [DVD].
Press [OPEN/CLOSE A ] to open the disc 
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close 
the disc tray.
It takes awhile to load 
the disc.
When you want to record to a 
cassette tape:
Press [VCR].
Insert the cassette tape with...

49EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
DVD/VCR DUBBING
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
“General Setting”  menu will appear.
2
 Use [K / L] to select “Recording”, 
then press [ENTER].
“Recording”  menu will appear.
3
 Use [K / L] to select “Dubbing 
Mode”, then press [ENTER].
Selection  menu will appear.
You 
can copy  a DVD to  a cassette  tape or copy  a cassette 
tape...

50 EN
4
 Use [K / L] to select “VCR  DVD”, 
then press [ENTER].
Dubbing Mode
VCR       DVD
DVD       VCR
5
  Press [SETUP] to exit. Press [VCR].
6
 Press [PLAY  B]. Then press 
[PAUSE  F] at the point you wish to 
start recording.
• Since  it takes  about  a few  seconds  before the 
actual dubbing  begins, please allow extra 5 
seconds  when selecting  the starting p oint.
7
  Press [DVD], then press [REC MODE] 
repeatedly to select the desired 
recording mode.
8
 Press [DUBBING].
VCR  to DVD...