Toshiba D Vr7kc2 Owner Manual

							81EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
EDITING DISCS
 Dividing a Title
Playlist 
You  can d ivide one title  into  two new  titles.
Note
• You  cannot d ivide a title  of the d isc when  the 
number  of recording  titles reaches  the maximum  of 
99  (-RW)  or 49 (+RW),  and the number  of recording 
chapters  reaches the maximum  of 999 (-RW)  or 254 
(+RW).
1
  Press [DVD].
In stop mode, press [TOP MENU].
• For V R mode DVD-RW, press  [DISC MENU] to 
select “ Playlist”.
2
 Use [K / L/ s  / B] to select a desired 
title, then press [ENTER].
3
 Use [K / L] to select “Edit”, then  press [ENTER].
e.g.) V R mode DVD-RW playlist
Play From Start
Edit
Title Delete
4
 Use [SKIP H], [SKIP G], [REV E], 
[FWD  D], [PAUSE F] and [PLAY B] 
to decide the point at which you will 
divide the title.
5
 Use [K / L] to select “Title Dividing”,  then press [ENTER].
6
 Use [K / L] to select “Yes”, then press [ENTER].
e.g.) V R mode DVD-RW playlist
Edit - Title Dividing
Ye s
No
JAN/ 1/09 1:00AM CH10   LP
1
PL
1 : 25 : 47
The  title  will be d ivided  into two new  titles.
Both  title names  are identical.
For DVD+RW:  Data  will be written  onto the disc 
momentarily.
Writing to Disc  90%
This operation may take 
awhile to be completed.  
For V R mode DVD-RW:  Proceed to step 7.
7
  Press [RETURN] or [STOP C] to exit.
Data  will be written  onto the disc momentarily.
This operation may take 
awhile to be completed.
SE-R0297
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
 
CLEAR RETURN
TOP MENU
WXYZ
JKL MNO DEF
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
AUSE REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING CH
ENTER
FWDPLAY
RETURN
REV
SKIPSKIPSTOP
TOP MENU
DVDPAUSE
DISC MENU




&1($%@%73,$@&/@WJOEE


 


 



 
						

							82 EN
EDITING DISCS
Combining Titles
1
  Follow the steps 1 to 3 in “Dividing a Title” on page 81 to display “Edit” 
menu.
2
 Use [K / L] to select “Title Combining”, then press [ENTER].
Edit
Scene Delete
Edit Title  Name
Chapter Mark
Title Dividing
Title Combining
JAN/ 1/09 1:00AM CH10   LP
1
PL
1 : 25 : 47
Title  combining  setting window  will appear.
Selected  title grays  out, and the frame  of the 
next  title becomes  yellow.
Edit - Title Combining
1 / 6
JAN/31/09 12:00PM  CH13  LP12:00PM (0:30:00)  JAN/31/09  CH13 LP
456
23
PL
11 + 
3
 Use [K / L  / {    / B] to select another 
title to combine, then press [ENTER].
Selection  menu will appear.
4
 Use [K / L] to select “Yes”, then press 
[ENTER].
Combine selected titles?
Ye sNo
The  two  titles  will combine  into a single  title.
Title List
1 / 6
PL
1
456
23
JAN/  1/09 1:00AM  CH10  LP1:00AM (2:30:00)  JAN/  1/09  CH10 LP
5
  Press [RETURN] or [STOP C] to exit.
Data will be written  onto the disc momentarily.
This operation may take 
awhile to be completed.
Playlist
You  can combine  two titles  into a single  title.
Note
• You cannot  select the same  title twice  and combine 
it  into  a single  title.
• If  either  one of the  two  original  titles is deleted,  the 
combined  new title is also d eleted.
SE-R0297
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN TOP MENU
WXYZ
JKL MNO DEF
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAUSE REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING CH
ENTER
RETURN
STOP




&1($%@%73,$@&/@WJOEE


 


 



 
						

							83EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
EDITING DISCS
Setting or Releasing the Title Protection
1
  Follow the steps 1 to 3 in “Putting 
Names on Titles” on page 
75 to display 
“Edit” menu.
2
 Use [K / L] to select “Protect”, then  press [ENTER].
Edit
Scene Delete
Edit Title  Name
Chapter Mark
Protect
JAN/ 1/09 1:00AM CH10   LP
1
ORG
1 : 25 : 47
• If  the  title  is protected, icon  will appear  in 
the  original list.
3
  Confirm the indication 
“OFF 
 ON”. Press [ENTER] again.
• If  the  title  is already p rotected, “ON  OFF”  will 
appear. I f you p ress [ENTER],  the title  will be 
released  from protection.
Edit - Protect
OFF         ON
JAN/ 1/09 1:00AM CH10   LP
1
ORG
1 : 25 : 47
• icon will appear  on the  title  in the  original 
list.
4
  Press [RETURN] and then [RETURN] or 
[STOP  C] to exit.
Data will be written  onto the disc momentarily.
This operation may take 
awhile to be completed.
To protect a whole disc 
(VR mode DVD-RW, DVD+RW/+R 
only):
Select “Disc  Protect OFF  ON”  from  the DVD 
Menu,  then select “Yes”.
Refer  to “SETTING A DISC TO  PROTECT” on 
page 34.
To p
revent  the accidental  editing, or erasing  of the  titles, 
you  can p rotect  them in “Edit”  menu.
You  can cancel  the title p rotection  feature after it is 
applied.
Original
SE-R0297
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN TOP MENU
WXYZ
JKL MNO DEF
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAUSE REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING CH
ENTER
RETURN
STOP




&1($%@%73,$@&/@WJOEE


 


 



 
						

							84 EN
EDITING DISCS
Setting or Clearing All Chapter Marks at Once
1
  Follow the steps 1 to 3 in “Putting Names on Titles” on page 
75 to display 
“Edit” menu.
2
 Use [K / L] to select “Chapter Mark”,  then press [ENTER].
Edit
Edit Title  Name
Chapter Mark
JAN/ 1/09 1:00AM CH8   LP
1
Video
1 : 25 : 47
3
 Use [K / L] to select the desired interval, then press [ENTER].
Edit - Chapter Mark
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
JAN/ 1/09 1:00AM CH8   LP
1
Video
1 : 25 : 47
4
 Use [K / L] to select “Yes”, then press [ENTER].
Chapter  marks are added.
If  you  select “ OFF” at step 3, all  the chapter 
marks  are erased.
5
  Press [RETURN] and then [RETURN] or 
[STOP  C] to exit.
Data will be written  onto the disc momentarily.
This operation may take 
awhile to be completed.
For 
titles  in video  mode DVD-RW,  you can set or edit 
chapter  at every  time interval. Y ou can  clear  the chapter 
mark  too.
You  can specify  the interval  of chapter  marks for titles l ast 
more  than 5 minutes.
Note
• You  cannot  select a chapter  mark interval  that 
exceeds  the length  of a title.
• The l ength  of chapters  may slightly d eviate from the 
one  specified  at the  step 3.
• A  chapter  mark may be delayed depending  on the 
recording  content.
• Maximum  number of chapter  for video  mode DVD is 
99  chapters p er title.
• The  interv al for  auto  chapter may  be up  to  two  
minutes d ifferent from the time  op tion  you set.
SE-R0297
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN TOP MENU
WXYZ
JKL MNO DEF
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAUSE REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING CH
ENTER
RETURN
STOP




&1($%@%73,$@&/@WJOEE


 


 



 
						

							85EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
LIST OF THE DEFAULT SETTINGS
The  following  table is the  contents  which you can set and  the d efault  settings.
Refer  to the  following  table for useful  operation.
Setup Items (highlight is the default) Contents
General Setting
PlaybackParental Lock
→ page 88OFF
level 8 [Adult]  to 
1 [Kid Safe] Set 
the p arental level  for DVD playback.
Audio  Out
→ p age 89 Dynamic 
Range Control
ON
OFF Compressing 
the range  of sound volume.
PCM
48kHz
96kHz Set 
whether  the sound  recorded  in 96kHz will  be 
down  sampled  to 48kHz.
 D olby D igital PCM
Stream Set 
the  type  of sound  signal which  outputs  from 
the d igital  audio  output j ack.
DTS
ON
OFF Set 
whether DTS signal  is output  or not.
Disc M enu Language
→ p age 90
English
French
Spanish
Other Set 
the l anguage  for disc menu l anguage.
Audio L anguage
→ p age 90
Original
English
French
Spanish
Other Set 
the l anguage  for audio.
Subtitle L anguage
→ p age 90
OFF
English
French
Spanish
Other Set 
the l anguage  for subtitles.
Angle I con
→ p age 90
ON
OFF Set 
whether  to display  the angle  icon or not.
Still Mode
→ p age 90
Auto
Field
Frame Set 
the  type  of still  image  in pausing playback.
Display OSD Language → page 91
English
Français
Español Set 
the l anguage  for OSD  (on-screen d isplay).
Screen S aver
→ p age 91 OFF
1 
minute
5  minutes
10  minutes
15  minutes Set 
the  idling  time before  the screen  saver starts.
FL Dimmer
→ p age 91
Bright
Dark Set 
the  brightness  of the  front p anel display.
Video Progressive → page 9 2 ON
OFFSet 
to the p rogressive  scan mode  (set to “ON”)  or 
to  the  interlace  scan mode  (set to “OFF”).
TV Aspect
→ p age 9 2 4:3 Letter 
Box
4:3  Pan & Scan
16:9 Wide Set 
a picture  size according  to aspect  ratio of your 
TV.
Select V ideo
→ p age 47
Video I n
S-Video I n Set 
the v ideo input  type to match  the external 
input.
Recording Auto Chapter
→ p age 39 OFF
5 
minutes
10  minutes
15  minutes
30  minutes
60  minutes Insert 
chapter  marks at even  time interval.
Recording A udio Select (XP)
→ p age 40 PCM
Dolby D
igital Set 
the  recording  audio type. (Only  when  the 
recording  mode is set  to X P.)
Auto 
Finalize
→ p age 35 Disc F
ull ON
OFF Set 
the  unit  to finalize  the disc automatically.
End  of Timer  Rec ON
OFF
Aspect  Ratio (Video  mode)
→ p age 40
Auto
4:3
16:9 Set 
a aspect  ratio for video  mode  recording.




&1($%@%73,$@&/@WJOEE


 


 



 
						

							86 EN
Setup Items (highlight is the default)Contents
Recording Dubbing Mode
→ p ages 49-50
VCR  DVD
DVD  VCR Set 
the VCR  to DVD (DVD  to VCR) duplication.
Make  Recording C ompatible
→ p age 39 ON
OFFSet 
to p rohibit  additional  recording (OFF) or to 
replace  the title l ist after  recording  (ON).
Clock Clock Setting → page 30 Set 
the  clock.
Auto Clock Setting
→ p age 29 OFF
Auto
 M anual Set 
the  clock  automatically.
Daylight S aving Time
→ p age 30
ON(MAR-NOV)
ON(APR-OCT)
OFF Set 
the  clock  for the d aylight  saving time.
ChannelA uto Channel  Preset
→ p age 27  T
une the channels  automatically.
M anual Channel  Preset → pages  27-2 8 Tune 
the channels  manually.
TV Audio S elect
→ p age 31
Stereo
SAP Set 
the  analog TV audio  type for output  and video 
mode  or DVD+RW/+R  recording.
DivX   DivX 
 VOD  → p age 93 Provide D
ivX  VOD  registration  code.
DivX Subtitle
→ p age 93
OFF
English
French
Spanish
German
Italian
Swedish
Dutch
Russian1
Russian2
Hungarian
Polish
Czech Set 
the l anguage  for DivX Subtitle.
HDMI Format → page 94
RGB
YCbCr Set 
the  color  space  for the HDMI output.
HDMI Audio
→ p age 95
ON
OFF Set 
whether  to output  the HDMI audio  signal or 
not.
RGB  Range
→ p age 95
Normal
Enhanced Set 
the  black-white  contrast level for HDMI RGB 
output.
Reset All
→ p age 96 Yes
NoSet 
to the d efault  setting.
LIST OF THE DEFAULT SETTINGS
Note
• Your  change  to each  settings  stays on even  when  the power  is off.• An  item  which  is not  currently  available is grayed  in the  settings.




&1($%@%73,$@&/@WJOEE


 


 



 
						

							87EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
GENERAL SETTING
Press  [STOP  C] if you  are playing  back a disc.
1
  Press [SETUP] and use [K / L] to 
select “General Setting“, then press 
[ENTER].
2
 Use [K / L] to select “Playback”, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
3
 Use [K / L] to select a desired item,  then press [ENTER].
1234567
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Submenu  will appear.
4
 Refer 1 to 7 on pages 88 to 90 and 
set the selected item.
5
  When you finish with the setting,  press [SETUP] to exit.
 Playback
SE-R0297
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO TIMER
PROG.
DISC MENU
CLEAR RETURN TOP MENU
WXYZ
JKL MNO DEF
ENTER
INSTANT
SKIP
PLAY
DVD
VCR
PAUSE REV
SKIP
STOPSKIP
FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOM
SEARCH
REPEAT REC
REC MODE
DUBBING CH
ENTER
SETUP
STOP




&1($%@%73,$@&/@WJOEE


 


 



 
						

							88 EN
GENERAL SETTING
1 Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level.  Playback 
will  stop  if the  ratings  exceed  the levels  you set, it will 
require  you to enter  a password  before the disc will 
playback. T his feature p revents your children  from 
viewing  inappropriate  material.
Use [K / L] to select the desired level, then press 
[ENTER].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a p assword  has not  been  set yet, proceed  to A.
If  a p assword  has been  set already, proceed  to 
B.
RATING EXPLANATIONS
•  OFF : Parental Control  is inactive;  all discs can play.
•  8 [Adult]: DVD software  of any  grades  (adult/general/
children)  can be played  back.
• 7 [NC 17]: No  one under 17 admitted.
•  6 [R]:  Restricted;  under 17 requires  accompanying 
parent  or adult  guardian.
• 5 [PG  R]: Parental  Guidance  Recommended.
• 4 [PG13]: Unsuitable  for children  under 13.
• 3 [PG]:  Parental  Guidance  suggested.
•  2 [ G]:  General Audience.
• 1 [Kid Safe]: Suitable  for children.
Note
• Parental lock  function may not be available  to some 
discs.
• With  some DVD, it  may be difficult  to find  if they  are 
compatible  with parental lock.  Be sure  to check  if the 
parental lock  function operates  in the  way  that  you 
have  set.
•  Record  the password  in case  you forget  it.
• If  there  is a DVD in  the unit  when  you set up the 
parental lock, press  [OPEN/CLOSE A] to activate  the 
parental lock level.
A A password  has not  been  set yet.
Use [K / L] to select “Yes”, then press [ENTER]. Use 
[the Number buttons] to enter a new password except 
for 4737, then press [ENTER].
Change Password?
Ye sNoPassword Input
Yes
Your  setting  will be activated.
B A password  has been  set already.
•  Use [the Number buttons] to enter the current 
password.
Password Input
Your  setting  will be activated.
•  If you want to change password, use [K / L] to select  “Yes” then press [ENTER]. Use [the Number buttons] 
to enter a new password except for 4737, then press 
[ENTER].

Change Password?
Ye sNoPassword Input
Yes
Your  setting  will be activated.
Note
• Press  [CLEAR]  to erase  numbers  entered incorrectly.
• When  you forget  the password  or you  want  to clear 
all  settings  in “Parental Lock”  menu, enter 4737 using 
[the Number buttons]  in password  input window. 
Password  will be cleared  and parental levels  will be 
set  to “ OFF”.
Playback (cont’d)




&1($%@%73,$@&/@WJOEE


 


 



 
						

							89EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
GENERAL SETTING
2 Audio  Out
Choose  the appropriate  audio setting  for your  external device.
It will only affect a disc playback.
Use [K / L] to select a desired item, then press [ENTER].
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTS
AB
C
D
ADynamic  Range Control (Default : ON)
Set to “ON”  to compress  the range  between  soft and loud  sounds.
Use [K / L] to select a setting, then press [ENTER].
Dynamic Range Control
ON
OFF
Your setting  will be activated.
Note
• Dynamic  range control  function  is available  only on 
the d iscs which  are recorded  in the D olby D igital 
format.
BSettings  for PCM  (Default : 48kHz)
Use [K / L] to select a setting, then press [ENTER].
PCM
48kHz
96kHz
Your  setting  will be activated.
48kHz   :  I f your  amplifier/decoder  is NOT compatible 
with 96kHz PCM,  select “48kHz”. 96kHz sound 
will  be output  in 48kHz.
96kHz   :  I f your  amplifier/decoder  is compatible  with 
96kHz  PCM, select “96kHz”. 96kHz sound  will 
be  out put.
Note
When playing back disc with copyright protection
• Even  if you  select “96kHz”, the  sound will be d own 
sampled  at 48kHz.
C Settings  for Dolby D igital (Default : Stream)
Use [K / L] to select a setting, then press [ENTER].
Dolby Digital
PCM
Stream
Your setting  will be activated.
PCM   :  C onverts  the D olby D igital  into PCM  (2 channel ). 
W hen  your  amplifier/decod er is N OT 
comp atible with D olby D igital,  set to “ PCM”.
Stream   :   Outputs Dolby Digital signals. 
When  your amplifier/d ecoder is compatible 
with D olby Digital, set to “Stream”.
DSettings  for DTS (Default : ON)
Select a setting using [K / L], then press [ENTER].
DTS
ON
OFF
Your setting  is activated.
ON :   Outputs DTS signals. 
If  your  amplifier / decoder  is compatible  with 
DTS,  set to “ ON”.
OFF :   No DTS signal  is output. 
If  your  amplifier / decoder  is NOT compatible 
with DTS, set  to “OFF”.
Playback (cont’d)




&1($%@%73,$@&/@WJOEE


 


 



 
						

							90 EN
GENERAL SETTING
3 Disc Menu Language (Default : English)
Set the l anguage  for disc menu.
Use [K / L] to select a language, then press [ENTER].
Disc Menu Language
English
French
Spanish
Other
Your  setting  will be activated.
4 Audio Language (Default : Original)
Set  the  audio l anguage.
Use [K / L] to select a language, then press [ENTER].
Audio Language
Original
English
French
Spanish
Other
Your  setting  will be activated.
•  When “ Original”  is selected,  the audio l anguage  will be 
in  the d isc’s d efault l anguage.
5 Subtitle Language (Default : OFF)
Set the  subtitle l anguage.
Use [K / L] to select a language, then press [ENTER].
Subtitle Language
OFF
English
French
Spanish
Other
Your  setting  will be activated.
If “ Other”  is selected  for 
3 to 5, press 4-digit  code 
using  [the Number buttons].
Code Input-
---
•  When you finish entering the code, press [ENTER]. 
Refer to the language code table on page 104.
Note
•  Only  the languages  supported  by the d isc can  be 
selected.
• Audio l anguage  setting may not be available  to 
some d iscs.
• You  can also  change  or switch  off the  subtitles  on a 
DVD  from  the disc menu  if it  is  avai lable.
•  Press  [CLEAR]  to erase  numbers  entered incorrectly.
6 Angle Icon (Default : ON)
Set to “ON”  to show  the angle  icon d uring the playback.
Use [K / L] to select a setting, then press [ENTER].
Angle Icon
ON
OFF
Your  setting  will be activated.
7 Still Mode (Default : Auto)
Select “Auto”  usually.
Use [K / L] to select a setting, then press [ENTER].
Still Mode
Auto
Field
Frame
Your  setting  will be activated.
Auto :   Optimum resolution  setting (“Field”  or 
“Frame”)  will be selected.
Field :  I mages in the  still  mode  will be stabilized.
Frame :  I mages in the  still  mode  will be highly d efined.
Note
• Frame is one  completed video  image made up of two 
fields  (there  are 30 frames p er second  of NTSC video).
Playback (cont’d)




&1($%@%73,$@&/@WJOEE