Toshiba L50db Owners Manual

SwipeQuickly move your finger in from the edge of the
screen, without pausing when you first touch it.
Swipe from the left edge: shows your recently
opened apps, and so on.
Swipe from the right edge: opens or closes the charms (Search, Share, Start, Devices, Settings).
Swipe from the top edge: opens or closes the
app command bar.
For details and more advanced touch screen gestures to interact with
Windows operating system, please refer to Help and Support.
Using the Touch Pad The Touch Pad located in the...

SwipeQuickly move your finger in from the edge of the
Touch Pad, without pausing when you first touch
it.
Swipe from the left edge: shows your recently
opened apps.
Swipe from the right edge: opens or closes the charms (Search, Share, Start, Devices, Settings).
Swipe from the top edge: opens or closes the
app command bar.Some of the Touch Pad operations described in this section are only
supported in certain applications.
The Keyboard
The number of keys available on your keyboard will depend on...

CAPS LOCKThis indicator glows green when letter keys are
locked into their uppercase format.NUM LOCKWhen the NUM LOCK indicator glows, you can
use the number keys on the keyboard for number
entry.
Function Key
The function keys (F1 ~ F12) are the twelve keys at the top of your
keyboard.
You can configure the function keys’ mode as "Special function mode" or
"Standard F1-F12 mode" by clicking  Desktop Assist -> Tools & Utilities -
> System Settings -> Keyboard  on the desktop.
"Special...

Special
function modeStandard F1-
F12 modeFunctionFN + 1FN + 1Reduces the icon size on the desktop
or the font sizes within one of the
supported application windows.FN + 2FN + 2Enlarges the icon size on the desktop
or the font sizes within one of the
supported application windows.FN + SpaceFN + SpaceChanges the display resolution.FN + FN + Turns the keyboard backlight on or
off. This function is supported with
some modelsSome functions will show the toast notification at the edges of the screen.
Those...

Optical disc drivesThe computer may be installed with a DVD Super Multi drive or Blu-ray™
Writer drive (BDXL™). When the computer is accessing an optical disc, the indicator on the drive glows.
Formats The drives support the following formats.
DVD Super Multi drive
The drive supports the following formats: CD-ROM, DVD-ROM, DVD-Video, CD-DA, CD-Text, Photo CD™ (single/multi-session), CD-ROM
Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-
EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R,...

2. Grasp the disc tray gently and pull until it is fully opened.Figure 4-2 Pressing the eject button and pulling the disc tray open1. Eject button2. Disc tray
3. Lay the disc, label side up, in the disc tray. Figure 4-3 Inserting a disc
1. Laser lensWhen the disc tray is fully opened, the edge of the computer will cover the
disc tray slightly. Therefore, you will need to turn the disc at an angle whenyou place it in the disc tray. After seating the disc, however, make sure itlies flat.Do not touch the...

If the disc is not seated properly when the disc tray is closed, the disc might
be damaged. Also, the disc tray might not open fully when you press the
eject button.
Removing discs
To remove the disc, follow the steps as detailed below:
Do not press the eject button while the computer is accessing the optical disc drive. Wait for the optical disc drive indicator to go out before you openthe disc tray. Also, if the disc is spinning when you open the disc tray, wait
for it to stop before you remove it.
1....

Writable discsThis section describes the types of writable discs. Check the specificationsof your drive to see the types of discs it can write.
CDs
CD-R discs can be written only once. The recorded data cannot be
erased or changed.
CD-RW discs including multi speed CD-RW discs, high-speed CD-RW
discs and ultra-speed CD-RW discs can be recorded more than once.
DVDs
DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only
once. The recorded data cannot be erased or changed.
DVD-RW, DVD+RW and DVD-RAM...

in this section. If you fail to do so, you may find that the optical disc drivemay not function properly, and you may fail to write or rewrite informationsuccessfully - this may cause you to either lose data or incur other damage
to the drive or media.
Disclaimer
TOSHIBA does not assume responsibility for the following:
Damage to any disc that may be caused by writing or rewriting with
this product.
Any change or loss of the recorded contents of media that may be
caused by writing or rewriting with this...

DVD+R:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)
TAIYO YUDEN CO., Ltd. (for 8x and 16x speed media)DVD+R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media)DVD-RW:
DVD Specifications for Recordable Disc for Version 1.1 or version 1.2
Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed
media)DVD+RW:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)DVD-RAM: (DVD Super Multi drive only)
DVD...