Toshiba Projector Tdp Et20 User Manual

							Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
PROJECTOR
TDP-ET10
TDP-ET20 
(with built-in DVD player)
In the spaces provided below, record the Model and Serial Number located at the bottom 
of your projector. Retain this information for future reference.
Model No.    Serial No.  
						

							2
SAFETY PRECAUTIONS
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is 
intended to alert the user to the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of suffi cient magnitude to constitute a 
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user 
to the presence of important operation and maintenance (servicing) instructions 
in the literature accompanying the appliance.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO R AIN OR MOISTURE. DANGEROUS 
HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT 
OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSON-
NEL ONLY.
WARNING:
USA only Handling the cord on this product or cords associated with accessories 
sold with this product will expose you to lead, a chemical known to the 
State of California to cause birth defects or other reproductive harm. 
Wash hands after handling. 
WARNING:
USA only  This product contains mercury. Disposal of mercury may be regulated 
due to environmental considerations. For disposal or recycling informa-
tion, please contact your local authorities or the Electronic Industries 
Alliance: www.eiae.org.
MODEL NAME: TDP-ET10, TDP-ET20  USA only 
FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communica-
tions.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:TRADE NAME: PROJECTOR  MODEL NAME: TDP-ET10, TDP-ET20
Te s t e d  t o  C o m p l y  
With FCC Standards
FOR HOME OR OFFICE USE 
						

							3
Before Using
-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and receiver.
-  Connect the equipment into and outlet on a circuit different from that to which the re-
ceiver is connected.
-  Consult the dealer or an experienced radio/TV technician for help.
RESPONSIBLE PARTY:  TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
9740 Irvine Blvd., Irvine, CA 92618-1697, USA
Phone: (949) 583-3000
WARNING:
USA only Changes or modifi cations made to this equipment not expressly 
approved by Toshiba, or par ties authorized by Toshiba, could void the 
user’s authority to operate the equipment.
Notice
CANADA only
This Class B digital apparatus complies with Canadian ICES- 003. 
Cet appareil numérique de la classe B est conforme à la norme 
NMB-003 du Canada. 
						

							4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:  PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN 
IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN 
THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can 
result in electric shock or fi re hazard. The safeguards incorporated in this unit will protect you if 
you observe the following procedures for installation, use and servicing. This unit is fully tran-
sistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS 
VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.  Read Owner’s Manual
After unpacking this product, read the 
owner’s manual carefully, follow all the 
operating instructions, and heed all warn-
ings.
3. Source of Light
Do not look into the lens while the lamp 
is on. The strong light from the lamp may 
cause damage to your eyes or sight.
2. Power Sources
This product should be operated with 
only the type of power source indicated 
on the marking label. If you are not sure 
what type of power source is available 
to you, consult your product dealer and 
local power company. For products 
intended to operate with battery power or 
other power sources, refer to the operat-
ing instructions.
4. Ventilation
Place this product in a location with ad-
equate ventilation to prevent heat build-
up. Openings in the cabinet are provided 
for ventilation and must not be blocked 
or covered. Do not place this product on 
a bed, sofa, rug or other similar surfaces 
that may block the ventilation holes. This 
product should not be placed in a con-
fi ned space or built-in installation such as 
a bookcase or rack unless proper venti-
lation is provided or the manufacturer’s 
instructions have been adhered to. 
						

							5
Before Using
5. Heat
The product should be situated away from 
heat sources such as radiators, heat reg-
isters, stoves, or other products (including 
amplifi ers) that produce heat.
6.  Water and Moisture
Do not place this product near water such 
as a bathtub, washbowl, kitchen sink, 
laundry tub, or in a wet basement, near a 
swimming pool and the like. Do not place 
objects fi lled with liquids, such as vases 
or cups, near or on the product.
7. Cleaning
Unplug this product from the wall outlet 
before cleaning. Do not use liquid clean-
ers or aerosol cleaners. Use a soft cloth 
for cleaning.
8. Power-Cord Protection
Power-supply cords should be routed so 
that they are not likely to be walked on or 
pinched by items placed upon or against 
them, paying particular attention to cords 
at plugs, convenience receptacles, and 
the point where they exit from the prod-
uct.
9. Overloading
Do not overload wall outlets, extension 
cords, or integral convenience recep-
tacles as this can result in a risk of fi re or 
electric shock. 
						

							6
IMPORTANT SAFETY INSTRUCTIONS (Continued)
10. Lightning storms
For added protection for this product, 
during a storm or when it is left unat-
tended and unused for long periods of 
time, unplug it from the wall outlet. This 
will prevent damage to the product due 
to lightning and power-line surges.
However, while it is thundering or light-
ning, do not touch the apparatus and any 
connected cable and/or equipment.
This will prevent you from receiving the 
electric shock by an electric surge.
11. Object and Liquid Entry
Never push objects of any kind into this 
product through its openings as they 
may touch dangerous voltage points or 
short-out parts that could result in a fi re 
or electric shock. Never spill liquid of any 
kind on the product.
12. Do not place the product 
vertically
Do not use the product in the upright 
position to project the pictures at the 
ceiling, or any other vertical positions. It 
may fall down and cause damage to the 
product.
13. Stack Inhibited
Do not stack other equipment on this 
product or place this product on the 
other equipment. The top and bottom 
of this product radiates heat and may 
overheat or cause damage to the other 
equipment.
14. Attachments
Do not use attachments not recom-
mended by the product manufacturer as 
they may cause hazards. 
						

							7
Before Using
15. Accessories
Do not place this product on an unstable 
cart, stand, tripod, bracket, or table. The 
product may fall, causing serious injury 
to a child or adult, and serious damage 
to the product. A product and cart combi-
nation should be moved with care. Quick 
stops, excessive force, and uneven 
surfaces may cause the product and cart 
combination to overturn.
S3125A
16. Damage Requiring Service
Unplug this product from the wall outlet 
and refer servicing to qualifi ed service 
personnel under the following conditions:
a)  When the power-supply cord or plug is 
damaged.
b)  If liquid has been spilled, or objects have 
fallen into the product.
c)  If the product has been exposed to rain 
or water.
d)  If the product does not operate normally 
by following the operating instructions. 
Adjust only those controls that are cov-
ered by the operating instructions as an 
improper adjustment of other controls 
may result in damage and will often 
require extensive work by a qualifi ed 
technician to restore the product to its 
normal operation.e)  If the product has been dropped or dam-
aged in any way.
f)  When the product exhibits a distinct 
change in performance - this indicates a 
need for service.
17. If glass components, in-
cluding the lens and lamp, 
should break, contact your 
dealer for repair service.
This product incorporates glass com-
ponents, including a lens and a lamp. If 
such parts should break, please handle 
with care to avoid injury and contact your 
dealer for repair service. The broken 
pieces of glass may cause injury. In the 
unlikely event of the lamp rupturing, thor-
oughly clean the area around the projec-
tor and discard any edible items placed 
in that area.
18. Servicing
Do not attempt to service this product 
yourself as opening or removing covers 
may expose you to dangerous voltage 
or other hazards. Refer all servicing to 
qualifi ed service personnel. 
						

							8
IMPORTANT SAFETY INSTRUCTIONS (Continued)
19. Replacement Parts
The user may perform replacement of 
the lamp but a service technician should 
make all other repairs. When replace-
ment parts are required, be sure the 
service technician has used replacement 
parts specifi ed by the manufacturer or 
have the same characteristics as the 
original part. Unauthorized substitutions 
may result in fi re, electric shock, or other 
hazards.
20. Safety Check
Upon completion of any service or 
repairs to this product, ask the service 
technician to perform safety checks to 
determine that the product is in proper 
operating condition.
21. Do not leave thermal-paper 
documents or easily de-
formed items on top of the 
unit or near the air exhaust 
for long periods of time.
The heat from the unit could erase the in-
formation on the thermal paper, or cause 
deformation or warping.
22. Do not use the product in a 
closed installation state.
Do not place the product in a box or in 
any other closed installation state other-
wise it may overheat. This could result 
in a risk of fi re. 
						

							9
Before Using
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug 
confi guration Plug typeLine 
voltagePlug 
confi guration Plug typeLine 
voltage
EURO 220 - 240VAustralian
240V
10A220 - 240V
UK 220 - 240VSwitzerland
240V
6A220 - 240V
Use a 5A fuse which is approved by 
ASTA or BSI to BSI362.
Always replace the fuse cover after 
changing the fuse.
North American 
240V
15A220 - 240V
IMPORTANT PRECAUTIONS
Save Original Packing Materials
  The original shipping carton and packing materials will come in handy if you ever have to 
ship your projector. For maximum protection, repack the set as it was originally packed at 
the factory.
Moisture Condensation
  Never operate this unit immediately after moving it from a cold location to a warm loca-
tion. When the unit is exposed to such a change in temperature, moisture may condense 
on the crucial internal parts. To prevent the unit from possible damage, do not use the 
unit for at least 2 hours when there is an extreme or sudden change in temperature.
Location and Installation
•  Do not place in hot locations, such as near a heater or in direct sunlight. Doing so could 
cause malfunction, and shorten the life of the projector.
•  Avoid locations with oil or cigarette smoke, which can affect the quality and useful like of 
the product optical parts and darken the screen.
•  Do not use the product vertically in any upright position or slantwise in an angle of 20 
degrees or more.
•  Using this instrument near a TV or radio may cause interference to the images or sound. 
If this happens, move it away from the TV or radio.
•  In a high altitude location where air is thin, cooling effi ciency is reduced so use it with the 
ambient temperature being lowered.
•  The set of projector is hot after use. Handle with care.
•  Do not use the projector while holding it in your hands or lap.
•  Do not use the projector near a power source and the like, or in locations like a ship 
or vehicle that are subject to vibration or shock. Doing so may lead to a malfunction or 
shorten service life. 
						

							10
IMPORTANT PRECAUTIONS (Continued)
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or 
plastic products touching the unit for a long time. They will leave marks on the fi nish. If 
cleaning with a chemically saturated cloth, be sure to follow the product’s precautions.
EXEMPTION CLAUSES
•  Toshiba Corporation bears no responsibility in the case of damages arising from natural 
disaster such as earthquakes, lightning, etc., fi re not liable to Toshiba Corporation, acts 
by third parties, other accidents, or use under abnormal conditions including erroneous or 
improper operation and other problems.
•  Toshiba Corporation bears no responsibility for incidental damages (lost profi t, work inter-
ruption, corruption or loss of the memory contents, etc.) arising from the use of or the 
inability to use this unit.
•  Toshiba Corporation accepts no liability whatsoever for any damages arising from not 
having followed the descriptions in this Instruction Manual.
•  Toshiba Corporation accepts no liability whatsoever for any damages arising from mal-
functions arising from combination with equipment or software that is not related to 
Toshiba Corporation.
OTHER CAUTIONS AND INFORMATION
Copyrights
Showing or transmitting commercial imaging software or broadcast or cable-broad cast-
ing programs with the purpose of other than the personal and private viewing, including 
modifying images using the freeze functions, or displaying with the varying aspect ratio of 
the images, could violate the direct or indirect copyrights of the imaging software or broad-
cast program, etc., if done without fi rst consulting with the copyright holder. For this rea-
son, please take appropriate measures before performing one of the actions listed above, 
including obtaining a license from the copyright holder.
Disposal
This product contains substances which are harmful to humans and the environment.
•  The lamp contains mercury.
Please dispose of this product or used lamps in accordance with local regulations.
Following information is only for EU-member states: 
The use of the symbol indicates that this product may not be treated as 
household waste. By ensuring this product is disposed of correctly, you 
will help prevent potential negative consequences for the environment and 
human health, which could otherwise be caused by inappropriate waste 
handling of this product. For more detailed information and  recycling of this 
product, please contact your local city offi ce, you household waste disposal 
service or the shop where you purchased the product.