Toshiba Projector Tdp Et20 User Manual

							31
Operations
TDP-ET20 DVD playback
About   
The    icons on the heading bar show the playable discs for the function 
described under that heading.
  You can use this function with DVD video discs.
  You can use this function with Video CDs.
   You can use this function with Audio CDs and CD-R /RW discs.
Setup the DVD player.
You can setup the DVD player setting.
(1)  Press [DVD SETUP] key on the remote control when DVD input is selected.
DVD setup menu will appear.
(2)  In DVD setup menu, there are 2 pages. One is SYSTEM SETUP page and the other 
is LANGUAGE SETUP page. Press 
  key to select page and press   key to 
select each setup item.
(3)  To exit from DVD setup menu, press 
    key to select EXIT SETUP or [DVD 
SETUP] key again. 
PASSWORD (For Parental control)
Unlock the password lock
To change parental level or password, it is required to enter password (4 digit security 
code) for unlocking.
(1)  Select the PASSWORD in SYSTEM SETUP page and press 
 or  key.
(2)  Press number key to input current password and press 
 key(If the password has not 
been set yet after you purchase this projector, it is ‘0000’).
(3)  If correct password is entered, 
 will appear. If  is still displayed, it means en-
tered password is incorrect. Please enter the correct password again.
Enter a new password
New password can be set to replace the default password.
(1)  Select PASSWORD in SYSTEM SETUP page and press 
 or  key.
(2)  Please make sure 
 is displayed. If  is displayed, it is required to unlock the 
password lock.
(3)  Press number button to input new password and press 
 key. Be sure to remember 
this number.
(4)  Select EXIT SETUP and press 
 key to save a new password.
If you forget the password, you can erase your current password by entering password as 
‘1048’. 
						

							32
PA R E N TA L
DVD discs equipped with the password function are rated according to their content. The 
contents allowed by a parental lock level and the way a DVD disc can be controlled may 
vary from disc to disc.
■ NotesDVD video discs may or may not respond to parental lock settings. This is not a defect in 
the DVD player. Make sure this function works with your DVD video discs.
Before changing the rating, it is required to enter password for unlocking. Please see the 
PAS SWO R D heading. 
p.31
 
(1)  Select R ATING in SYSTEM SETUP page and press 
 or  key.
(2) Press 
  key to select the rating from 1 to 8. Rating 1 is restrictive while rating 8 can 
virtually playback all DVD software.
The parental lock level is equivalent in USA to following.
 Level 1: Kid safe
 Level 2: G
 Level 3: PG
 Level 4: PG-13
 Level 5: PG-R
 Level 6: R
 Level 7: NC-17
 Level 8: Adult
DEFAULT (RESET)
DVD setting except PASSWORD can be set to factory default using this menu.
(1)  Select DEFAULT in SYSTEM SETUP page and press 
 or  key.
(2)  Select RESTORE to set DVD setting to factory default.
■ NotesThis function only effects DVD setting. Other setting such as projector setting will not set 
to default if restored.  
DivX® VOD
Some DivX® Video-On-Demand fi les require registration code. Please get the code of your 
DVD video player as follow:
(1) Selec t DI V X
® VOD in SYSTEM SETUP page.
(2)  Your registration code will be shown.
■ NotesThis registration code is for DivX® Video-On-Demand only, do not apply this code for other 
applications or website.
TDP-ET20 DVD Playback (Continued) 
						

							33
Operations
PBC setting 
This DVD supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the 
abbreviation of Playback Control.) You can enjoy two playback variations depending on 
types of discs.
•  Video CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD in the same way as an audio CD.
•  Video CD equipped with PBC function (Version 2.0)
In addition to operation of a Video CD not equipped with the PBC function, you can enjoy 
playback of interactive software with search function by using the menu displayed on the 
screen (Menu Playback).
Some of the functions described in this owner’s manual may not work with some discs.
(1)  Select PBC in SYSTEM SETUP page and press 
 or  key.
(2) Press 
  key to select ON/OFF and press  key.
OSD LANGUAGE
On Screen Display (OSD) language can be selected in this menu. This setting is effective 
for DVD setup menu only.
(1)  Select OSD LANG in LANGUAGE SETUP page and press 
 or  key.
(2) Press 
  key to select OSD language and press  key.
AUDIO LANGUAGE 
Audio language can be selected in this menu. If you want to output other language, please 
use [AUDIO] key on the remote while playing the DVD.
(1)  Select AUDIO LANG in LANGUAGE SETUP page and press 
 or  key.
(2) Press 
  key to select Audio language and press  key.
■ NotesSome DVD video discs may be played in a different language other than you selected. A 
prior language may be programmed on the disc.
SUBTITLE LANGUAGE 
Subtitle language can be selected in this menu. If you want to display other language, 
please use [SUBTITLE] key on the remote during play the DVD.
(1)  Select SUBTITLE LANG in LANGUAGE SETUP page and press 
 or  key.
(2) Press 
  key to select Subtitle language and press  key.
■ NotesSome DVD video discs may be set to display subtitles in a different language other than 
you selected. A prior subtitle language may be programmed on the disc.
Some DVD video discs allow you to change subtitle selections only via the disc menu. If 
this is the case, press the [TOP MENU] key on the remote and choose the appropriate 
subtitle language from the selection on the disc menu. 
						

							34
MENU LANGUAGE 
DVD menu language can be selected in this menu.
(1)  Select MENU LANG in LANGUAGE SETUP page and press 
 or  key.
(2) Press 
  key to select DVD menu language and press  key.
■ NotesSome DVD video discs may not include your pre-selected language. In this case, the DVD 
video player automatically displays disc menus consistent with the disc’s initial language 
setting.
Playing a disc.
1. Basic playback 
  
(1)  Turn on the power and select DVD input.
(2)  The DVD startup screen will appear on the screen.
(3)  Load the disc in the disc slot with the label side facing up. (If the disc has a label.) 
Hold the disc without touching either of its surfaces, align it with the guides, and place 
it in position.
(4)  “READ” appears on the screen, then playback starts.
•  A menu screen will appear on the screen, if the disc has a title menu.
• Press 
    on the remote control to select title, then press  key. Title is selected 
and play commences.
(5)  Press VOL [+] [-] to adjust the volume.
•  When using an amplifi er, adjust the volume with the amplifi er.
(6) Press 
 /  or  to end playback.
■ NotesInsert a disc horizontally into the DVD disc slot, do not jam or force it strongly, otherwise 
the DVD may malfunction or the disc might be damaged.
 CAUTION
Never insert your fi nger into the disc hole when load the disc to the disc slot. Keep your 
fi ngers well clear of the disc slot when disc is loading or unloading. Neglecting to do so 
may cause personal injury.
TDP-ET20 DVD Playback (Continued) 
						

							35
Operations
■ NotesStrong static electricity may affect the DVD player’s operation and cause it not to work 
properly. If this happens, please try followings.
(1) Press 
 /  key for about 5 seconds. DVD player will eject the disc.
(2)  If DVD player still don’t work, turn OFF the POWER, disconnect and then reconnect 
the AC power cord, and turn ON the projector again.
To start playback in the stop mode:
Press 
 /  or 
To pause playback (still mode):
Press  /  or  during playback.
To resume normal playback, press  /  or .
•  The sound is muted during still mode.
• If 
 is pressed during pause, DVD plays frame by frame  .
To  s t o p  p l a y b a c k :
Press 
 /  or 
To remove the disc:
(1) Press  /  during stop or .
(2)  Remove the disc after the disc comes out.
■ Notes•  If a non-compatible disc is loaded, “WRONG REGION” will appear according to the type 
of loaded disc. In this case, check your disc again.
•  Some discs may take a minute or so to start playback.
• 
If you insert a single-sided disc the wrong way, “READ” will appear on the display for about 
20-40 seconds. Then “NO DISC” will display and the disc will be ejected automatically.
•  Some playback operations of DVDs may be intentionally fi xed by software producers. 
Since this projector plays DVDs according to the disc contents the software producers 
designed, some playback features may not be available. Also refer to the instructions 
supplied with the DVDs.
•  Do not move the projector during playback. Doing so may damage the disc. If you want to 
move the projector to other place or room, be sure to eject the disc and turn off the power 
beforehand.
•  If the disc is not loaded even if the disc is inserted into the DVD disc slot, remove the disc 
once and try to load the disc again.
•  Do not put any objects other than discs in the disc slot. Doing so may cause the projector 
to malfunction.
•  When you press a button, there may be a slight delay before the function activates. 
						

							36
2. Playing in fast reverse or fast forward directions   
Press  or  during playback.
 (REW) :  Fast reverse playback (2X-20X)
 (FF) :  Fast forward playback (2X-20X)
Each time you press 
 or  , the playback speed changes.
To resume normal playback, press 
 /  or .
■ Notes•  The projector mutes sound and subtitles during reverse and forward scan of DVD 
video discs (except playing x2 forward). However, the projector plays sound during fast 
forward(x2) or fast reverse(x2) play of audio CDs.
•  The playback speed may differ depending on the disc.
3. To pause playback (still playback)   
Press  /  or  during playback.
To resume normal playback, press 
 /  or .
■ NotesThe sound is muted during still playback.
4. Locating a chapter or track   
Press  or  repeatedly during playback to select the chapter or track you want. Playback 
starts from beginning of the selected chapter or track.
■ Notes
The “” symbol may appear at the upper left of the screen. This means either the feature 
you tried is not available on the disc, or the DVD cannot access the feature at this time. 
This does not indicate a problem with the disc or this unit.
TDP-ET20 DVD Playback (Continued) 
						

							37
Operations
5. Repeat playback   
Repeat playback allows you to repeat Chapter/Title/All (DVD) or Track/All (CD/ VCD).
Press [REPEAT] on the remote control during playback or stop mode.
Repeat mode will change repeatedly as following.
 DVD:  Chapter 

 Title 

 All 

 Off
CD/VCD: Track 

 All 

 Off
DivX
®/MP3: One 

 Folder 

 All 

 Off
•  If you press 
 /  or , the Repeat function ends and playback stops.
•  Some discs may not permit the repeat operation.
•  Repeat does not work with an interactive DVD
6. Random playback  
Select tracks or fi les at random and playback.
Press [R ANDOM] on the remote during playback.
Random mode will change ON or OFF.
7. Changing angles 
When playing back a disc recorded with multi-angle facility, you can change the angle that 
you are viewing the scene from.
(1)  Press [ANGLE] on the remote control during playback.
The current angle will appear.
(2)  Press [ANGLE] repeatedly until the desired angle is selected.
■ NotesDepending on the DVD, you may not be able to change the angles even if multi-angles are 
recorded on the DVD.
8. Title selection 
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, 
you can select the desired title.
(1)  Press [TOP MENU] on the remote control during playback.
Title menu appears on the screen.
(2) Press 
    to select the desired title.
(3) Press 
 or .
The playback of the selected title will start.
■ Notes•  Depending on the DVD, you may not be able to select the title.
•  Depending on the DVD, a “title menu” may simply be called a “menu” or “title” in the in-
structions supplied with the disc. 
						

							38
•  Depending on the DVD, the title menu may be displayed automatically when the disc is 
loaded.
•  Depending on the DVD, a chapter menu may be displayed after you select a title.
9. Changing soundtrack language  
You can select the language when you play a multilingual disc.
(1)  Press [AUDIO] on the remote control during playback.
The current soundtrack language will appear.
(2)  Press [AUDIO] on the remote control repeated until the desired language is selected.
•  The selected soundtrack language will appear.
■ Notes•  If the desired language is not heard after pressing the button several times, the language 
is not recorded on the disc.
•  Changing soundtrack language is cancelled when you eject the disc. The initial default 
language or available language will be heard if the disc is played back again.
•  If you select DTS in playing DTS-encoded disc, no sound will be heard from the projector’
s speakers.
•  Depending on the DVD disc, you may not be able to select the language by [AUDIO] key. 
It may be selected in the Title menu.
10. Subtitles 
When playing back a disc recorded with subtitles, you can select the subtitle language or 
turn the subtitle off.
(1)  Press [SUBTITLE] repeatedly during playback until you desired language appears.
(2)  To turn off the subtitle, press [SUBTITLE] until “OFF” appears.
•  The “OFF” on screen display will disappear after a few seconds.
■ Notes•  Depending on the DVD, you may not be able to change subtitles, or to turn subtitles on or 
off.
•  While playing a DVD, the subtitle may change when you loaded or eject the disc.
•  In some cases, a selected subtitle language may not be changed immediately.
11. Display status   
With press of [DISPLAY], the status of the disc will appear on the screen as follows:
(1)  When DVD video is playing.
TDP-ET20 DVD Playback (Continued) 
						

							39
Operations
• Press [DISPLAY] again
•  Press [DISPLAY] again to erase this OSD.
(2)  When CD/VCD is playing.
•  Press [DISPLAY] again to erase this OSD.
12. Multimedia fi les on DVD/CD playback  
(1)  Load a disc on which Multimedia fi les have been recorded in the disc slot.
(2)  A fi le menu screen will appear on the screen.
 Press   to change folder window, fi le window, or fi le type buttons.
To change fi le types to play, press until fi le type display button is highlighted. And 
select following one fi le type icon desired and press 
.
 MP3: 
 DivX®: 
(3)  In fi le window, press   or Number buttons (0-9) to select the desired folder/fi le.
The selected fi le starts playing back.
(4) Press 
 to end playback.
■ Notes•  File name can’t be displayed correctly in some languages such as Japanese, Chinese, 
and Korea etc.
• Supported DivX
® fi le: ver. 3.11/4.0/5.x
•  A fi le name must incorporate “mp3”, “divx”, or “avi” extension. 
						

							40
•  CD fi le system: ISO9660 Level1, 2, or Joliet.
•  This internal DVD video player requires discs/recordings meet certain technical standards 
in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set 
to these standards. There are many different types of recordable disc formats (includ-
ing CD-R containing MP3/DivX
® fi les). Because this area of technology is still evolving, 
Toshiba cannot guarantee that all recordable discs will produce optimal playback quality. 
The technical criteria set forth in this owner’s manual are meant only as a guide.
•  You must obtain any required permission from copyright owners to download to download 
or use copyrighted content. Toshiba cannot and does not grant such permission.
TDP-ET20 DVD Playback (Continued)