Toshiba Strata Airlink External Wireless Handset User Guide

							Features13
Features3
This chapter describes all of the available wireless telephone features that include:
©Powering ON and OFF
©Making and receiving calls
©Menu operation
©Adjusting the volume
©Muting voice and ring
©Locking the dial pad
©FCN feature access
NoteSee your System Administrator to find out which system features and access 
codes apply to your telephone and the handset software version. 
						

							Powering ON and OFF —————————————————————————————————
14Strata AirLink External Wireless Handset
Powering ON and OFF
Making and Receiving Calls
You can make or receive calls from telephones outside the telephone system by 
dialing direct or using CO Line access codes.
ä
To  m a k e  a  c a l l  
ä
To redial the last number you calledä
Press 
3:5 
once to power 
ON
...or 
3:5 to 
power OFF.The handset beeps twice and this displays:
1. Enter a 
telephone 
number and 
press 
&$//
The handset displays the number. If it is longer than 18 
digits, the display scrolls to another line. You can enter up to 
32 digits.
...or press 
&$// first 
and dial the 
telephone 
number.You hear dial tone and your call connects.
2. Press 
(1. Your call terminates.
1. Press 
&$//. Wait for the last number dialed to appear in the display.
2. Press 
&$// 
again.The last number dials.
3. Press 
(1. Your call terminates. 
						

							————————————————————————————————————  Menu Operation
Features15
ä
To receive a call
Menu Operation
You can configure some aspects of handset operation using its menu. The handset 
must be idle to use the menu. Ta b l e  5 briefly describes each option.
ä
To access the menu options1. Press 
&$//. The call connects. If you are in Auto Answer mode, you 
automatically connect with an incoming call without having 
to press 
&$//.
2. If you want to 
mute the 
ringing of an 
incoming call, 
press 
&/5.The call mutes.
1. Press 
)&1 + 
sThe display scrolls forward through the menu options.
...or t
. The display scrolls backward through the menu options.
2. Press 
)&1 
again when the 
desired option 
is displayed.
Important!You must power OFF the handset first or all 
menu changes, except the idle message, are 
lost when you remove the handset battery. 
						

							Menu Operation ————————————————————————————————————
16Strata AirLink External Wireless Handset
Auto Answer
Table 5 Menu Options
NumberOptionAction
FCN + 7 Auto Answer Toggles Auto Answer ON/OFF.
FCN + 13 Change Idle Message Changes the idle message.
FCN + 4 Click Volume Adjusts the beep volume when pressing a button.
FCN + 11 Del All Speed Dial #s Deletes all Speed Dial numbers.
FCN + 12 Del Last # Dialed Deletes the last number dialed.
FCN + 8 Display Contrast Sets the display contrast.
FCN + 9 Display Test Option Tests the icon display.
FCN + 2 Ringer Type Option Sets the ringer type.
FCN + 3 Ringer Volume Sets the ringer volume.
FCN + 6 Time Format Sets the time format.
FCN + 10 System Configuration For Toshiba use only.
1. Press )&1 + t
...or 
 + )&1.
2. Press 
)&1. 
						

							————————————————————————————————————  Menu Operation
Features17
Change Idle Message
The handset displays a message when it is idle, which you can change or delete. The 
message can have up to 18 characters. 
Important!When the handset is idle, the second line of the LCD displays the date, 
so you should not use the full 18 characters for your message.
ä
To change the message3. Press 
)&1 again.
NoteYou can toggle ON and OFF once you perform  
Step 2.
4. Press 
(1. Clears the display and saves the value selected last.
1. Press 
)&1. 
2. Press t
...or 
 + )&1.
3. Press 
)&1. The handset changes to alpha mode.
4. Press characters 
or numbers.The new idle message displays. Refer to Ta b l e  6  on Page 
28 for specific character examples.
5. Press 
672 +
(1
.The new idle message is store in memory, and Menu 
Operation displays.
3499 
						

							Menu Operation ————————————————————————————————————
18Strata AirLink External Wireless Handset
Click Volume
Delete Last Number Dialed
The handset stores the last number that you dialed and displays it when you press 
&$//.
ä
To delete the last number dialed1. Press 
)&1 + t
...or 
 + )&1.
2. Press 
)&1. You hear levels of volume or this displays:
NoteYour choices are VOL1~3 and silent.
3. Press 
(1. Clears the display and saves the last value selected.
1. Press 
)&1 and 
t
...or 
 + )&1. 
						

							————————————————————————————————————  Menu Operation
Features19
Display Contrast
2. Press )&1 again.
3. Press 
)&1 once 
more to confirmIf you confirm, the LDN is deleted.
...or 
(1 to 
cancel.
4. Press 
(1.
1. Press 
)&1 + t
...or 
 + )&1.
2. Press 
)&1 until 
the contrast that 
you want 
displays.There are seven types of contrast available.
3. Press 
(1. 
						

							Menu Operation ————————————————————————————————————
20Strata AirLink External Wireless Handset
Display Test Option
Ringer Type
1. Press )&1 + t
 
(several times)
...or 
 + )&1.
2. Press 
)&1 to 
turn the test ON 
and OFF.When the test is OFF, this displays:
When the test is ON, all icons display and the 
alphanumeric area fills with boxes.
3. Press 
(1.
1. Press 
)&1 + t
...or 
 + )&1.
2. Press 
)&1. You hear the chosen (1~8) ringer type.
3. Press 
(1. 
						

							————————————————————————————————————  Menu Operation
Features21
Ringer Volume
Time Format
1. Press )&1 + t
...or 
 + )&1.
2. Press 
)&1. You hear levels of volume or this displays:
NoteYour choices are VOL1~3 and silent.
3. Press 
(1.
1. Press 
)&1 + t
...or 
 + )&1.
2. Press 
)&1. Your format displays, or 12H OR 24H displays.
3. Press 
)&1 again. The values are toggled between 12H and 24H.
4. Press 
(1.
3163 
						

							Using the Hookswitch (Flash) ——————————————————————————————
22Strata AirLink External Wireless Handset
Using the Hookswitch (Flash)
The ordinary telephone hookswitch is located in the handset cradle of your telephone. 
The wireless telephone has a special button (
)/6+), however, that flashes the 
hookswitch. 
)/6+ enables a number of features.
Conferencing, Centrex, or behind PBX operation, which are CO line features, require 
“flashing a CO Line” to enable Centrex/PBX access codes or extension numbers. Both 
the ordinary use of 
)/6+ and accessing a CO Line are explained below.
ä
To use the hookswitch during a call
ä
To flash a CO Lineä
Press 
)/6+. You hear dial tone.
1. Press 
)/6+. You hear dial tone.
Important!This hookflashes the office telephone 
system only.
2. Press
BBBBB.NoteThe access code depends upon the Centrex or 
PBX that you have. Check with your System 
Administrator. 
3. Enter a Centrex or 
PBX feature access 
code or extension 
number.