Toshiba Strata Dk280 Liquid Crystal Display Digital Telephone User Guide

3. Call Forward-No 
Answer 
4. Call Forward-Busy/No 
Answer 
CF-BN:NNN-MMM 
JAN 26 TUE 01:43 
5. Call Forward-Fixed 
6. Call Forward-External 
[::iE:: TUE Bl:43] 
:‘*,,I 
Call Forward-No Answer 
All calls to your station when set with this feature will forward to a selected 
station if you fail to answer within a time that you designate. 
Call Forward-Busy/No Answer 
All calls to your station set with this feature will forward immediately to a selected 
station whenever you are busy on another call or in...

Call Forwarding a Primary 
or Phantom Directory 
Number: 
1. Press the [PDN] or 
[PhDN] that you want 
to Call Forward. 
[iii5ZF-] 
1,;,,, 
2. Enter a Call Forward 
Access Code 
(# 6 0 I- # 6 0 4). 
[pTTGGGE] 
mm.* 
3. Dial the number to 
which calls will forward. 
4. Press Speed Dial 
and then Spkr. 
Call Forwarding a Primary and/or Phantom Directory Number 
Your telephone has a Primary Directory Number [PDN] which can only be call 
forwarded from your telephone. 
To set call forward for a Phantom...

To Cancel a Call Forward: 
1. Press the [PDN] or 
[PhDN] you want to 
cancel Call Forwarding 
on. 
2. Dial # 6 0 1. 
3. Press Spkr. You will hear a steady dial tone and see a steady LED light. 
The dial tone will go silent, and the LED will flash intermittently. 
The LED will go off. Call forwarding for the selected [PDN] or [PhDN] is now 
canceled. 
To Park and Park/Page 
(Automatic Orbit 
Selection): 
1. While connected to a 
calling party, press 
Park and Page. 
c 1 ENTER ORBIT NO. 
:

Table 1 
Paging Group and Zone Codes 
Paging Group Codes Paging Zone Codes 
# 3 1 l-Group A # 3 15-Group E # 3 5-Zone A 
# 3 12-Group B # 3 1 6-Group F # 3 6-Zone B 
# 3 I E-Group C # 3 17-Group G # 3 7-Zone C 
# 3 14-Group D # 3 1 &-Group H # 3 &-Zone D 
Enter code # 3 0 to page stations assigned to the All Call Page group. 
Enter code # 3 9 to page stations assigned to the All Call Page group and 
possibly external page zones, depending on system programming. 
The LCD will show the 9 9 9 Auto Park...

TO Display Parked Calls: 
1. 
Press Mode. 
[MOOE NO. ] 
r. .i 
2. 
Press 6 4. 
ILN NN ORBIT XXX 1 
3. 
Press Scroll to 
monitor the next parked 
call. 
4. Press Scroll to 
monitor the next parked 
call. 
[LN 8 ORBIT 901t 
DID723 
Park Orbit list Display 
This feature enables you to monitor (view) the calls that are parked at your 
station. 
If your telephone has an Orbit List button, press it and go to Step 3. 
Your telephone must be idle to use the Mode button when displaying the Park 
Orbit List. 
The...

2. Press Scroll to view 
the saved information 
on the LCD display. 
n Press # to delete 
information on the 
LCD display. 
n Press * to go back 
to previous LCD 
screen. If your telephone is equipped with a Lost Call Auto Dial button, you may 
auto dial a saved number by performing any of the following: 
H Enter Class/AN1 Information display Mode + 6 2, and choose the number 
or name of the lost caller you want to contact. 
H Press Pooled Line Crp*, and then Lost Call Auto Dial. 
H Press a 
[DN] button,...

4. To answer the Msg 
LED indication from the 
called station, press the 
flashing Msg button. 
5. To clear the Msg LED 
that you set on some 
other telephone’s [DN] 
from the [DN] that sent 
the Message Waiting 
signal, press the [DN] 
button, dial the 
Directory Number that 
you set the MW signal 
on and press Msg 
twice (or 7 7). 
6. To clear the Msg LED 
from the [DN] that 
received the Message 
Waiting signal, press 
the [DN] + # 4 0 9. Note: 
Up to five message waiting displays may be stored on the...

:- 
Assigning a mailbox to store 
messages: 
1. Press a [DN]. 
2. Press # 6 5 6. 
I 
656 ID CODE SET 
. 
1 
Assign a Voice Mail Message Mailbox 
Press the [DN] that you want to assign a mailbox number. When you assign a 
mailbox for a 
[DN], calls to that [DN] will be able to forward directly to the [DN]‘s 
voice mailbox on the Toshiba voice mail system. 
3. Dial the digits (up to 16) 
and pauses to be sent. 
4. Press Redial to store 
data. The LCD displays the digits and pauses. These digits include...

To Clear All Digits: 
1. Press a [DN]. 
2. Dial # 6 5 6 or 
#657. 
3. Press Redial. 
To Display Busy Field 
Status: 
1. Press Mode. 
[no] 
m111 
Press 1.  2. 
3. Enter the first 1 or 2 
digits of a 
[DN]. 
Press #. 
I 
4. Press Page to rotate 
Busy Field groups. 
To Exit Any Mode: 
1. Press Mode. 
2. Press 0. :_; 
: 
: 
Busy Field Display 
Your telephone must be idle to use the Mode button when Soft Keys are turned 
ON. 
Note: 
The Busy Lamp field (BLF) mode will stop all other displays from 
appearing...

.: .~ .:.. . . . . 
30