Toshiba Strata E Electronic Telephone User Guide

CALL FUNCTIONS 
TRUNK QUEUING (continued) 
4A) If there is an idle trunk, you will be connected and can dial the 
desired telephone number. 
l You hear CO dial tone. 
l CO LED flashes at the In-use rate. 
l INT LED goes off. 
4B) If all trunks are busy, you will hear busy tone. 
5) Depress them button or dial flto set Automatic Callback. 
l Busy tone stops. You will hear dial tone for 2 seconds 
and then busy tone again. 
l You may go on-hook or make other calls while waiting 
for a trunk to become...

26 
P-TOSHIBA 
CALL FUNCTIONS 
TRUNK-TO-TRUNK CONNECTION 
TO ESTABLISH A TRUNK-TO-TRUNK CONNECTION 
1) Establish a one-CO line call.* 
2) Depress the m button. 
l You hear intercom dial tone. 
l CO LED flashes at the Conference rate. 
l INT LED flashes at the In-use rate. 
3) Select a second CO line and dial the next telephone number.* 
4) Depress the m button after the party answers.** 
l CO LEDs flash at the In-use rate. 
l All parties will be conferenced. 
5) Depress the m button. 
l You hear intercom...

CALL HOLD and TRANSFER 
CALL HOLDING 
TO HOLD A CALL (CO line appears on your station) 
1) Whileconnected toan outsidecall, depressthembutton 
(or depress the m button and dial 0 I). 
l CO LED flashes at the On-hold rate. 
l To reconnect the call, depress them button on hold (or 
depress the m button and dial 0 I). 
TO HOLD A CALL (CO line does not appear on your station) 
1) Whileconnectedtoan outsidecall,depressthembutton 
(or depress the m button and dial 0 1). 
l INT LED goes off. 
l To reconnect the...

CALL HOLD and TRANSFER 
CALL TRANSFER WITH CAMP-ON (continued) 
5A) Hang up. 
l INT LED goes off. 
l CO LED changes to the On-hold flash rate. 
l CO line rings the called station. 
l CO LED illuminates steadily when the called station 
connects with the transferred call. 
l If the station fails to answer the call, you will receive a 
recall ring after a predetermined time. 
. . . or . . . 
3B) If the called station is busy: 
l Busy tone is heard. 
48) Hang up. 
l INT LED goes off. 
l CO LED changes to...

CALL HOLD and TRANSFER 
CALL TRANSFER WITH CAMP-ON (continued) 
NOTE: 
If your electronic telephone has the Ringing Line Preference 
feature, you may depress the m button or lift the handset 
instead of depressing the m button. 
2) Tone Signalling: 
a) You will hear intercom ringing. 
l INT LED flashes at the Incoming Call rate. 
b) Lift the handset (or depress the m button). 
l INT LED changes to the In-use flash rate. 
c) Speak to the transferring station. 
d) You will be connected to the outside call...

CALL HOLD and TRANSFER 
CALL TRANSFER WITH CAMP-ON (continued) 
cl) Depress the m button (if conversing on a CO line). 
l Existing CO call is put on hold. 
l The camped-on line rings at your electronic tele- 
phone. 
l CO LED changes to the Incoming Call flash rate. 
c2) Depress the m button to answer the call. 
l CO LED changes to the In-use flash rate. 
NOTE: 
If your electronic telephone has the Ringing Line Preference 
feature, you may depress the m button or lift the handset 
instead of depressing...

CALL HOLD and TRANSFER 
NIGHT TRANSFER 
PROGRAMMABLE OPTION 
On an optional basis, your system can function with two or three 
ringing patterns. If three patterns are selected, they are designed 
DAY, DAY 2, and NIGHT. If only two patterns are selected, 
DAY, and NIGHT designations are used. 
In both cases, different ringing patterns are chosen by sequential 
depressions of the 
q button on station 10. 
The active pattern is shown bythe state of the NT LED as follows: 
DAY 
DAY 2 
NIGHT Three-pattern...

p-ITOSHIBA-q 
MISCELLANEOUS FEATURES 
ACCOUNT CODE RECORDING 
On some calls, you may be required (forced) to dial an account 
code before dialing an outside number. On other calls, you may 
wish to record an account number voluntarily after either dialing 
an outside number or receiving an incoming call. The code you 
enter will be recorded on the Station Message Detail Recording 
(SMDR) printout with the details of your call. 
TO RECORD A FORCED ACCOUNT CODE 
1) Access a CO line. 
l You hear dial tone....

MISCELLANEOUS FEATURES 
ALARM 
A station lo-only programmable option used with an optional 
Door Phone Control Unit and alarm system to cause a signal in 
the system. Depressing the-button resets the alarm signal 
,in the system. 
BACKGROUND MUSIC (BGM) 
If Music-on-Hold is available on your system, you may listen to 
background music via your station’s speaker by depressing the 
m button. Adjust the volume with the control on the lower 
right side of your electronic telephone. 
DIRECT STATION SELECTION...

F-TOSHIBA 
MISCELLANEOUS FEATURES 
DOOR PHONE 
TO ANSWER THE DOOR PHONE 
1) You hear a distinctive ringing tone. 
2) Lift the handset. 
l INT LED lights. 
l You are connected to the door phone. 
3) Hang up when the call is completed. 
TO CALL/MONITOR A DOOR PHONE 
1) Lift the handset. 
2) Depress the m button. 
l You hear intercom dial tone. 
l INT LED flashes at the In-use rate. 
3) Dial the number for the desired door location. 
661 or 66” Location 
662 or 67” Location 
663 or 68” Location 
664...