Toshiba Strata E Electronic Telephone User Guide

MISCELLANEOUS FEATURES 
MESSAGE WAITING 
PROGRAMMABLE OPTION 
If someone calls your telephone and you are unable to answer or 
vice versa, the calling party may set the Message Waiting indica- 
tor (a flashing LED) on the called party’s telephone. 
The Message Waiting indicators for each type of electronic tele- 
phone are: 
1) MW/FL LED on the lo- or 20-button electronic telephone. 
2) MW LED on the single-line electronic telephone. 
Up to four Message Waiting indications may be queued on the 
message...

36 
MISCELLANEOUS FEATURES 
MESSAGE WAITING (continued) 
TO SET THE MESSAGE WAITING INDICATOR ON 
ANOTHER TELEPHONE 
1) At your telephone: Lift the handset, depress m and dial the 
desired intercom number. 
2) If the called telephone does not answer: Depress them 
button to set the message indication. 
l The MW/FL LED flashes at the called telephone. 
l The MW/FL LED illuminates at your telephone. 
3) Place the handset on hook. 
l The MW/FL LED turns off at your station. 
l The MW/FL LED continues to...

TOSHIBA-9 
MISCELLANEOUS FEATURES 
MODEM 
Calls may be originated from the station’s intercom or CO line 
and then transferred to the modem line. 
TO ORIGINATE A MODEM CALL 
1) Set the m button to call mode. 
l LED goes off. 
2) Set the m button to manual mode. 
l LED goes off. 
3) Call another modem/device via the CO or intercom line. 
4) Depress the m button when a modem tone is received 
from the other end. 
5) To disconnect the call, depress the m button. 
TO SET THE MODEM FOR AUTO-ANSWER 
1) Set the...

~ToSH’=A- 
MISCELLANEOUS FEATURES 
OVERRIDE 
TO INITIATE A BUSY OVERRIDE SIGNAL 
1) After reaching a busy station, you may signal that station 
that a call is waiting by dialing 1. 
l A tone signal is heard at the busy station. 
TO OVERRIDE DND (Programmable Option) 
1) After reaching a DND station, you may signal that station 
that a call is waiting by dialing 1. 
l A tone signal is heard at the DND station. 
TO INITIATE EXECUTIVE OVERRIDE (Programmable Option) 
1) After reaching a busy station,...

MISCELLANEOUS FEATURES 
PRIVACY/NON-PRIVACY 
PROGRAMMABLE OPTION 
In a non-private system, them button prevents other stations 
from breaking into an in-progress CO line call. 
TO USE PRIVACY/NON-PRIVACY FEATURE 
1) Depress the m button. 
l PRV LED goes on. 
l Your station has CO line privacy. 
STATION SECURITY 
PROGRAMMABLE OPTION 
The m button allows a station to turn its microphone off/on 
while idle. Handsfree Answerback is inoperable while the micro- 
phone is off. 
TO USE STATION SECURITY 
1)...

MISCELLANEOUS FEATURES 
TOLL RESTRICTION OVERRIDE 
TO OVERRIDE TOLL RESTRICTION AT A STATION FOR A 
SINGLE CALL 
1) Lift the handset. 
2) Depress a Toll Restricted m button.* 
l Listen for dial tone. 
l CO LED flashes at the In-use rate. 
3) Dial pii. 
l You no longer hear dial tone. 
4) Dial oneof thetwoToll Restriction Override Codes(4digits). 
l You hear dial tone. 
5) Dial the desired telephone number. 
6) Hang up when the call is completed. 
* Or depress the m button and dial access a CO line; see...

r 
MISCELLANEOUS FEATURES 
TIMED REMINDERS 
Allows five separate reminders to be set at each station. 
These reminders will be an audible beeping at the times 
(hour and minute) set by the station user. They can occure 
just once or repeated on a daily basis. 
TO ENTER A TIMED REMINDER 
1) Depress the 1 i buttons. 
2) Dial a 2-digit reminder number (05 - 09). 
3) Enter the desired time (24-hour clock format; i.e., 
HHMM) for the message to be displayed. 
4) Dial 1 if message will be repeated every day,...

MISCELLANEOUS FEATURES 
VOICE MAIL (VM) (continued) 
TO RETRIEVE MESSAGES 
1) Depress the m and m buttons. 
TO CLEAR ALL DIGITS 
1) Depress the i 1 (1 1 or 1 0) 1 buttons. 
NOTES: 
1. The above procedures are required for initial VM set-up 
only. The digits remain in memory until changed. 
2. Digits are not sent to camped-on VA4 calls.  

r 
CENTREX APPLICATION 
Your system may be equipped with the CENTREX Application, 
which enhances the system feature capability when installed 
behind a CENTREX or PBX system. 
NOTE: 
Wherever a CENTREX line is indicated in this section, it can also 
be a CO and/or PBX line. 
Your electronic telephone may be equipped with one or more of 
the enhanced CENTREX features listed below: 
A) Flexible Intercom Numbering (Up to 4 Digits) 
A station intercom number can be 1,2,3 or 4 digits. It is, therefore,...

CENTREX APPLICATION 
F) SINGLE-LINE ELECTRONIC TELEPHONE 
l To hook-switch a single-line electronic telephone for 
Centrex/PBX feature access: 
Dial: i d p. 
NOTE: 
The person with whom you are talking will not hear the 
tones when you dial.