Vivitek D7180hd User Manual

DLP Projector – User’s Manual 
 
 
—  12 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control curs or buttons or the buttons on the top of the projector to navigate 
and make changes to the OSD. The following illu stration shows the corresponding buttons on the 
projector. 
 
1.  To enter the OSD, press the  MENU but-
ton.  
2.  There are six menus....

DLP Projector – User’s Manual 
 
 
Setting the OSD Language 
Set the OSD language to your pr eference before continuing. 
1. Press the MENU button. Press the cursor  ◄► button to navigate to  SETUP>>Basic. 
 
2. Press the cursor ▲▼  button until Language is highlighted.  
3. Press the cursor ◄►  button until the language you want is selected.  
4. Press the MENU button to close the OSD.   
– 13  –  

DLP Projector – User’s Manual 
 
 
OSD Menu Overview 
Use the following illustration to quickly find a se tting or determine the range for a setting. 
SharpnessTintColorContrastBrightnessPICTURE>> Basic
Flesh Tone
PICTURE>> AdvancedColor TemperatureGamma
Color Space
Lamp Native/Warm/Normal/Cool/Cooler/High Cool
Auto/RGB/STDV/HDTV
DISPLAYAspect RatioKeystoneOverscanPC Detail AdjustmentAuto/Frequency/Phase/Horizontal Position/Vertical Position
Auto/16:9/4:3/Letter Box/Real
Background ColorSleep TimerAuto...

DLP Projector – User’s Manual 
 
 
PICTURE>>Basic Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
PICTURE>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the 
PICTURE>>Basic  menu. Press ◄► to change values for settings. 
Note: 
Customizing the settings in  PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄►
 buttons to set the Display Mode.  
(Range: Movie/ Bright/ Normal/ User...

DLP Projector – User’s Manual 
 
 
PICTURE>>Advanced Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the  
PICTURE>>Advanced  menu. Press the cursor  ▲▼ button to move up and down in the  
PICTURE>>Advanced  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Noise Reduction  Press the cursor ◄► button to adjust the Noise Reduction.  
Color Temperature  Press the cursor ◄► button to set the Color Temperature. 
Gamma  Press the cursor ◄►
 button to...

DLP Projector – User’s Manual 
 
 
HSG Adjustment 
Press the ENTER  button to enter the  HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Primary Color  Press the 
◄► buttons to set the Primary Color. 
Notes: There are six sets ( R/ G/ B/ C/ M/ Y) of colors to be customized. 
Hue Press  the ◄►  buttons to adjust the Hue. 
Saturation Press  the ◄►  buttons to adjust the Saturation. 
Gain Press  the ◄►  buttons to adjust the Gain. 
White Balance 
Press the ENTER  button to enter the  White Balance sub menu....

DLP Projector – User’s Manual 
 
 
User Color Temp 
Press the ENTER  button to enter the  User Color Temp sub menu.  
 
ITEM DESCRIPTION 
White Gain Red  Press the ◄► buttons to adjust the White Gain Red. 
White Gain Green  Press the ◄► buttons to adjust the White Gain Green. 
White Gain Blue  Press the ◄► buttons to adjust the White Gain Blue. 
 
—  18 —  

DLP Projector – User’s Manual 
 
 
DISPLAY Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
DISPLAY  menu. Press the cursor  ▲▼ button to move up and down in the  DISPLAY menu.  
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Aspect Ratio  Press the cursor ◄►
 button to set the Aspect Ratio. 
(Range:  Auto/ 16:9/ 4:3/ Letter Box/ Real) 
Keystone  Press the cursor ◄► button to adjust the Keystone. 
Overscan  Press the cursor ◄► button to...

DLP Projector – User’s Manual 
 
 
PC Detail Adjustment 
Press the ENTER  button to enter the  PC Detail Adjustment  sub menu. 
Note: 
Customizing the settings in  PC Detail Adjustment menu is only available when PC input source 
(analog RGB) is selected. 
 
ITEM DESCRIPTION 
Auto Press the 
ENTER/AUTO  button on the control panel or the  ENTER/AUTO button on the 
remote control to automatically adjust frequency, phase, and position. 
Frequency Press  the ◄►  buttons to adjust the A/D sampling number....

DLP Projector – User’s Manual 
 
 
  SETUP>>Basic Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SETUP>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the  
SETUP>>Basic  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄►
 buttons to select a different localization menu. 
(Range: English/ Danish/ Dutch/ Finnish/ Français/ Deutsch/ Italiano/ Korean/ Norsk/ Polish/ 
Português (Latin American)/...