Vivitek D7180hd User Manual

DLP Projector – User’s Manual 
 
 
Menu Settings 
Press the ENTER  button to enter the  Menu Settings sub menu. 
 
ITEM DESCRIPTION 
Menu Position  Press the 
◄► buttons to select from five OSD locations:  
Top-Left/ Top-Right/  Center/ Bottom-Left/ Bottom-Right. 
Menu Display Time  Press the 
◄► buttons to set the Menu Display timer before the OSD times out. 
(Range: 5sec/ 10sec/  15sec/ 20sec/ 25sec/ 30sec) 
 
Source 
Press the ENTER  button to enter the  Source sub menu. 
 
ITEM DESCRIPTION 
PC Press...

DLP Projector – User’s Manual 
 
 
Command Control Settings 
Press the ENTER  button to enter the  Command Control Settings  sub menu. 
 
ITEM DESCRIPTION 
Control By Press the ◄► buttons to select projector remote command control. (Range:  RS232/ RJ45) 
Network State  Press the 
ENTER button to enter the  Network State sub menu.  
See  Network State  on page 23. 
Projector ID  Press the cursor ◄►
 button to set Projector ID number for projector control by RS232 com-
mand. 
 
Network State 
 
ITEM...

DLP Projector – User’s Manual 
 
 
For simplicity and ease of operatio n, the projector provides diverse networking and remote manage-
ment features. 
The LAN/RJ45 function of  the projector through a network, such  as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector st atus information, such as: Video-Source, Sound-
Mute, etc. 
 
1.  Connect an RJ45 cable to RJ45 ports  on the projector and the PC (Laptop). 
 
2.  On the PC (Laptop), select  Start ´ Control  Panel  ´...

DLP Projector – User’s Manual 
 
 
3. Right-click on  Local Area Connection, and select  Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
– 25  –  

DLP Projector – User’s Manual 
 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
7. Press the  Menu button on the projector. 
8. Select  OSD ´ SETUP>>Basic Menu  →Command Control Settings →Network State. 
9. After getting into  Network, input the following: 
`  DHCP: Off 
`  IP Address: 10. 10. 10. 10 
`  Subnet Mask: 255.255.255.0 
`  Gateway: 0.0.0.0 
`  DNS Server: 0.0.0.0 
10. Press 
 (Enter) /  ► to confirm settings. 
11.  Open a web browser...

DLP Projector – User’s Manual 
 
 
13. Press  (Enter) /  ►. 
The projector is setup for remote managemen t. The LAN/RJ45 function displays as follows. 
 
Based on network web-page for the input-string in  tools tab, the limitation for Input-Length is 
in the below list (“space” and t he other punctuation key included): 
CATEGORY ITEM INPUT-LENGTH 
IP Address 15 
IP ID 3 Crestron Control 
Port 5 
Projector Name 10 
Location 9 Projector 
Assigned To 8 
DHCP (Enabled) (N/A) 
IP Address 15 
Subnet Mask 15...

DLP Projector – User’s Manual 
 
 
 
For more information, please visit  http://www.crestron.com/. 
— 28 —  

DLP Projector – User’s Manual 
 
 
RS232 by Telnet Function 
Besides projector connected to  RS232 interface with “Hyper-Ter minal” communication by dedicated 
RS232 command control, there is alternative RS232 command control way, so called “RS232 by 
TELNET” for LAN/RJ45 interface. 
Quick Start-Guide for “RS232 by TELNET” 
Check and get the IP-Address on OSD of the projector. 
Make sure that laptop/PC can acce ss the web-page of the projector. 
Make sure that “Windows Firewall” setting to be disabl ed...

DLP Projector – User’s Manual 
 
 
Input the command format like the below: 
telnet  ttt.xxx.yyy.zzz  23  (“Enter” key pressed) 
( ttt.xxx.yyy.zzz : IP-Address of the projector) 
If Telnet-Connection ready, and user  can have RS232 command input, then “Enter” key pressed, the 
RS232 command will be workable. 
 
How to have TELNET enable d in Windows VISTA / 7 
By default installation for Windows VISTA, “TELNET”  function is not included. But end-user can have 
it by way of “Turn Windows feat ures On or...

DLP Projector – User’s Manual 
 
 
 
Select “Turn Windows features on or off” to open 
 
Have “Telnet Client” option che cked, then press “OK” button. 
 
– 31  –