Xerox 7142 User Manual

							
Image Quality 
Xerox WorkCentre 7132 User Guide 61
[Non-target Area Color] Screen
Allows you to select the target color to replace the source color outside the target area. 
You can select from the same seven fixed and six custom colors as for the target area. 
The custom colors are set up by the Key Operator.
1.Select [Dual Color] on the 
[Color Effects] screen.
2.Select [Non-target Area Color].
3.Select the required option.
4.Select [Save].
[Color] Screen
Allows you to select the output color when making single-color copies. You can select 
from six fixed and six custom colors. The custom colors are set up by the Key Operator.
1.Select [Single Color] on the 
[Color Effects] screen.
2.Select [Color].
3.Select the required option.
4.Select [Save].
Color Balance
This feature allows you to adjust the density level of the four CMYK toner colors (cyan, 
magenta, yellow, black) by ±3 levels in three density ranges.
1.Select [Color Balance] on the 
[Image Quality] screen.
2.Set the required options.
3.Select [Save].
Low Density
Allows you to adjust the CMYK color strength for low-density areas.
Medium Density
Allows you to adjust the CMYK color strength for medium-density areas.
High Density
Allows you to adjust the CMYK color strength for high-density areas.
Downloaded From ManualsPrinter.com Manuals 
						

							
3 Copy 
62 Xerox WorkCentre 7132 User Guide
Color Shift
This feature allows you to adjust the hue of the colors to be reproduced in the copy by 
a maximum of two levels in two directions. All colors in the document are shifted by the 
same amount.
The color of the original document is repres ented by the [Before] slider on the [Color 
Shift] screen, and the color of the output copy is represented by the [After] slider.
When the [Before] slider shifts to the left, yellows become slightly more reddish, greens 
slightly more yellowish, and similarly for all  four colors. Conversely, when the [Before] 
slider shifts to the right, reds become sli ghtly more yellowish, yellows slightly more 
greenish, and similarly for all four colors.
NOTE:  This feature is only available when the output color is set to [Auto Detect] or 
[Color] in the [Output Color] feature on the [Copy] screen.
1.Select [Color Shift] on the 
[Image Quality] screen.
2.Set the required option.
3.Select [Save].
Coolest
Shifts the [Before] color slider two steps to the left.
Cool
Shifts the [Before] color slider one step to the left.
Normal
No color shift is applied.
Warm
Shifts the [Before] color slider one step to the right.
Warmest
Shifts the [Before] color slider two steps to the right.
Downloaded From ManualsPrinter.com Manuals 
						

							
Layout Adjustment 
Xerox WorkCentre 7132 User Guide 63
Layout Adjustment
This section describes the layout adjustment features for copying. For more information 
on the features available, refer to the following.
Book Copying – page 63
2 Sided Book Copy – page 64
Original Size – page 65
Edge Erase – page 66
Image Shift – page 66
Image Rotation – page 68
Invert Image – page 69
Original Orientation – page 69
1.Press the  button 
on the control panel.
2.Select [Copy] on the touch 
screen.
3.Select the [Layout Adjustment] 
tab. Use the side tabs to switch 
between screens.
4.Select the required feature.
Book Copying
This feature allows you to  copy facing pages of a bound document in the correct page 
sequence using the document glass. The two  pages will be copied onto two separate 
pages.
1.Select [Book Copying] on the 
[Layout Adjustment] screen.
2.Select the required options.
3.Select [Save].
NOTE:  The facing pages of a bound document must be placed in a horizontal 
orientation on the document glass.
Off
Disables the feature.
Downloaded From ManualsPrinter.com Manuals 
						

							
3 Copy 
64 Xerox WorkCentre 7132 User Guide
Left Page then Right
Copies pages of an open book in the direction from left to right.
• Both Pages - Copies both the left and right pages.
• Left Page Only - Copies the left pages only.
• Right Page Only - Copies the right pages only.
Right Page then Left
Copies pages of an open book in t he direction from right to left.
• Both Pages - Copies both the left and right pages.
• Left Page Only - Copies the left pages only.
• Right Page Only - Copies the right pages only.
Top Page then Bottom
Copies pages of an open book in the direction from top to bottom.
• Both Pages - Copies both the top and bottom pages.
• Top Page Only - Copies the top pages only.
• Bottom Page Only - Copies the bottom pages only.
Binding Erase
Erases printing of the center binding area of the book that tends to be shadowed due 
to the fold in the pages. Use the scroll buttons to specify the area to be erased from the 
center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.1 inch) 
increments.
2 Sided Book Copy
This feature allows you to make double-sided copies in the same order and image 
layout as the original bound document, us ing the document glass. A blank sheet is 
automatically inserted as the first page.
1.Select [2 Sided Book Copy] on 
the [Layout Adjustment] screen.
2.Select the required options.
3.Select [Save].
NOTE:  This feature and the [Book Copying] feature cannot be activated 
simultaneously.
Off
Disables the feature.
Downloaded From ManualsPrinter.com Manuals 
						

							
Layout Adjustment 
Xerox WorkCentre 7132 User Guide 65
Left Page then Right
Copies both pages of an open book in the direction from left to right.
Right Page then Left
Copies both pages of an open book in the direction from right to left.
Top Page then Bottom
Copies both pages of an open book in the direction from top to bottom.
Start Page & End Page
Displays the [2 Sided Book Copy - Start Page & End Page] screen.
Specifies the start page and the end page for copying. The specified page sides must 
be identified using the bound original.
Binding Erase
Erases printing of the center binding ar ea of the book that tends to be shadowed due 
to the fold in the pages. Use the scroll buttons to specify the area to be erased from the 
center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1mm (0.1 inch) 
increments.
Original Size
This feature allows you to set the size of t he document automatically, to select from a 
list of preset sizes, or to  mix different size documents. If you select a preset size, 
documents will be copied ac cording to the specified size re gardless of their actual size.
1.Select [Original Size] on the 
[Layout Adjustment] screen.
2.Select the required option.
3.Select [Save].
Auto Detect
Automatically detects the size of standard sized documents.
Manual Size Input
Allows you to select the input size from the 11 preset standard sizes in portrait or 
landscape orientations, or select a custom size within the ranges of 15-297 mm (0.6-
11.7 inches) for length and 15-432 mm (0.6-17.0 inches) for width. The presets are set 
up by the Key Operator.
Mixed Sized Originals
Allows you to copy more than one original size document. The machine senses the 
mixed sized originals automatic ally, and copies each document at the same size as the 
originals. Load different size documents, with top left corners aligned, into the 
Document Feeder.
Downloaded From ManualsPrinter.com Manuals 
						

							
3 Copy 
66 Xerox WorkCentre 7132 User Guide
NOTE: 5.5 × 8.5 and A5 originals must be loaded in portrait orientation.
NOTE:  Confirm that the orientation of the documents and the [Original Orientation] 
setting on the [Layout Adjustment] screen are the same.
Edge Erase
This feature allows you to erase unwanted  marks such as hole punch marks from each 
edge of the copy.
NOTE:  Make sure that the orientation of the documents and the [Original Orientation] 
setting on the [Layout Adjustment] screen are the same.
1.Select [Edge Erase] on the 
[Layout Adjustment] screen.
2.Select the required options.
3.Select [Save].
Normal
Allows you to select the amount to be er ased from the edge of the documents. Presets 
are set up by the Key Operator. If you do not want to erase any edge width, select [Edge 
Erase] and select 0.0 using the scroll buttons.
Edge Erase
Allows you to specify the width of the edge to be deleted from the document. Enter the 
amount you want to erase from the top, bottom, right, and left margins. Up to 50 mm (2 
inches) can be entered.
Image Shift
This feature allows you to change the position of the image on the output copy paper.
NOTE:  Make sure that the orientation of the documents and the [Original Orientation] 
setting on the [Layout Adjustment] screen are the same.
NOTE:  The amount of the image shift depends on the size of paper loaded in the 
machine.
NOTE:  When [Mixed Sized Originals] is selected, the amount shifted is determined by 
the image position of the first sheet, and is applied to all subsequent sheets of the 
documents.
1.Select [Image Shift] on the 
[Layout Adjustment] screen.
2.Select the required option.
3.Select [Save].
Downloaded From ManualsPrinter.com Manuals 
						

							
Layout Adjustment 
Xerox WorkCentre 7132 User Guide 67
No Shift
Disables the feature.
Auto Center
Automatically places the image in the center of the copy paper.
Margin Shift
Moves the image by specified amounts on the copy paper in the Up/Down and Left/
Right directions. You can enter up to 50 mm (2 inches) for both dimensions.
If your machine is configured to perform double-sided copies, you can select the 
options below for both Side 1 and Side 2.
• Side 1 - Displays the [Image Shift - Side 1] screen.
• Side 2 - Displays the [Image Shift - Side 2] screen. Refer to the [Image Shift - Side 1] screen for a description of the options available.
• Mirror Shift - Automatically places  a mirror image of Side 1 onto Side 2.
[Image Shift - Side 1] Screen
This feature allows you to move the image on Side 1.
1.Select [Margin Shift] on the 
[Image Shift] screen.
2.Select [Side 1] to display the 
[Image Shift - Side 1] screen.
3.Select the required option.
4.Select [Save].
No Shift
Disables the feature.
Auto Center
Automatically places the image in the center  of the paper. You can specify an offset of 
up to 50 mm (2 inches) for both dim ensions using the scroll buttons.
Corner Shift
Moves the image to the corner of the paper. Select one of eight arrows to specify the 
direction for the movement. You can specify an o ffset of up to 50 mm (2 inches) for both 
dimensions using the scroll buttons.
Variable Shift
Moves the image by specified amounts on th e paper. You can specify up to 50 mm (2 
inches) for both dimensions using the scroll buttons.
Downloaded From ManualsPrinter.com Manuals 
						

							
3 Copy 
68 Xerox WorkCentre 7132 User Guide
Image Rotation
This feature allows you to automatically rotate the image to match the orientation of the 
paper in the tray.
1.Select [Image Rotation] on the 
[Layout Adjustment] screen.
2.Select the required option.
3.Select [Save].
Off
Disables the feature.
Always On
Automatically rotates the image, as required, to fit on the selected copy paper.
On during Auto
Automatically rotates the image, as required, to fit on the selected copy paper. This 
feature is available only when [Auto] is selected in the [Paper Supply] feature or [Auto 
%] is selected in the [Reduce/Enlarge] feature.
Rotation Direction
Displays the [Image Rotation  - Rotation Direction] screen.
[Image Rotation - Rotation Direction] Screen
Allows you to specify the reference edge for image rotation.
1.Select [Rotation Direction] 
displayed when selecting 
[Always On] or [On during Auto] 
on the [Image Rotation] screen.
2.Select the required option.
3.Select [Save].
• Staple Position - Rotates the image to match the stapling edge when originals of  different sizes are placed in the Docume nt Feeder. This option is available only 
when the finisher is installed on the machine.
• Portrait Original - Left Edge - Rotates the image to align the top of a landscape  document with the left side of a portrait document.
• Portrait Original - Right Edge - Rotates the image to align the top of a landscape  document with the right side of a portrait document.
Downloaded From ManualsPrinter.com Manuals 
						

							
Layout Adjustment 
Xerox WorkCentre 7132 User Guide 69
Invert Image
This feature allows you to mirror the image, and to make negatives of the image on the 
copy output.
1.Select [Invert Image] on the 
[Layout Adjustment] screen. 
2.Select the required options.
3.Select [Save].
Mirror Image
Allows you to create a mirror image of the document.
• Normal Image - Select this option for normal image output.
• Mirror Image - Creates a mirror image of the original for copy output.
Negative Image
Allows you to create a negative image of the document.
• Positive Image - Select this option for normal positive image output.
• Negative Image - Creates a negative image of the original for copy output. When  [Black] is selected as the output color, all the black images on the page are inverted 
to white, and all the white images are inverted to black. When [Color] is selected as 
the output color, all colors are inverted to their complementary colors.
Original Orientation
This feature allows you to specify the  orientation of the documents. The document 
orientation must be specified before using the Image Shift, Edge Erase, Multiple-Up, 
Repeat Image, Annotation, and Booklet Creation features.
1.Select [Original Orientation] on 
the [Layout Adjustment] screen.
2.Select the required option.
3.Select [Save].
Head to Top
Selects the vertical orientation, where the top of the document is orientated towards the 
back of the machine.
Head to Left
Selects the horizontal orientation, where t he top of the document is orientated towards 
the left of the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							
3 Copy 
70 Xerox WorkCentre 7132 User Guide
Output Format
This section describes features that enhance the appearance of a copy job. For more 
information on the features available, refer to the following.
Booklet Creation – page 70
Covers – page 72
Transparency Separators – page 73
Multiple-Up – page 74
Poster – page 75
Repeat Image – page 75
Annotation – page 76
Watermark – page 77
Preset Repeat Image – page 78
1.Press the  button 
on the control panel. 
2.Select [Copy] on the touch 
screen.
3.Select the [Output Format] tab. 
Use the side tabs to switch 
between screens.
4.Select the required feature.
Booklet Creation
This feature allows you to create multi-page booklets from a set of 1 or 2 sided originals. 
It reduces and correctly positions each image  to produce output, that when folded, will 
be ordered to read like a booklet.
NOTE:  If the number of document pages is a mu ltiple of four, the booklet will not have 
blank pages. Otherwise the extra  pages in the book will be blank.
NOTE:  This feature is unavailable when [Uncollated] or [With Separators] is selected 
in [Copy Output].
1.Select [Booklet Creation] on the 
[Output Format] screen.
2.Select the required options.
3.Select [Save].
Off
Disables the feature.
Downloaded From ManualsPrinter.com Manuals