Xerox ColorQube 9303 User Manual

Paper/Output
ColorQube™ 9301/9302/9303
Print131
2-Sided Printing
You can have your job automatically printed on both sides of a sheet of paper.
•1-Sided Print prints on one side of the paper or transparency. Use this option when printing on 
transparencies, envelopes, or labels. 
•2-Sided Print prints on both sides of a sheet of paper. The images are printed so the job can be 
bound on the long edge of the sheet.
•2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper. The images are...

Paper/Output
ColorQube™ 9301/9302/9303
Print 132
Booklet Creation
Select this menu item to display the Booklet Creation screen 
to select booklet layout and booklet finishing options.
Booklet Finishing
• Select Booklet Fold to fold the booklet
• Select Booklet Fold and Staple to staple the booklet in 
the center and then fold.
Booklet Layout
• Using this option, the document pages are rearranged 
into the correct sequence to create the booklet.
•Use Print Page Borders to place a border around the 
images...

Paper/Output
ColorQube™ 9301/9302/9303
Print133
High Speed (Black and White only)
• This option is a high speed printing mode available for black and white printing only.
• It is the default setting for black and white printing and is recommended for most office uses and 
quick prints.
Enhanced (Color only)
• This is the default option when color printing is selected.
• It is a high quality printing mode for fine lines and detail.
• Recommended for vibrant, saturated, color prints. 
Note The print job...

Special Pages
ColorQube™ 9301/9302/9303
Print 134
Special Pages
The Special Pages tab enables you to add, modify, or delete cover pages, inserts, or exception pages.
The table provides a summary of the 
special pages for your print job. Up to 250 
inserts and exception pages can be 
included in the table. You can change the 
width of the columns in the table.
To edit, delete or move an entry in the 
table use the following buttons:
•Edit you can select single or 
multiple entries and use this button to...

Special Pages
ColorQube™ 9301/9302/9303
Print135
4. Select the printing options:
•Blank or Preprinted inserts a blank or pre-printed sheet and does not print an image.
•Print on Side 1 prints on side one of the cover.
•Print on Side 2 prints on side two of the cover only.
•Print on Both Sides prints on both sides of the cover.
5. Select OK to save your selections and exit.
The cover details display in the table.
Add Inserts
Use this option to add blank or pre-printed inserts to your printed document. To...

Special Pages
ColorQube™ 9301/9302/9303
Print 136
2. Enter the page number the exception programing applies to. If multiple exceptions are required it 
is recommended you enter all the page numbers, separated by a comma or enter a page range 
separated by a dash.
If individual programing is required for some of the exceptions, the entry can be edited from the 
table.
3. Select the Paper requirements for the exceptions. 
If Use Job Setting is displayed, the same paper as the main job is used.
4. Select...

Color Options
ColorQube™ 9301/9302/9303
Print137
Color Options
The Color Options tab contains the 
following items that enable you to select a 
color correction (or black and white 
printing), customize the Automatic color 
correction, and adjust colors in your job.
Some features are only supported by 
specific printer configurations, operating 
systems, or driver types. You may see more 
features or options listed than your specific 
device supports.
Color Correction
Select one of the following color...

Color Options
ColorQube™ 9301/9302/9303
Print 138
Print Settings on the Page
Prints the filename, print-quality mode, and color settings of the print job on the edge of the page.
Downloaded From ManualsPrinter.com Manuals 

Layout/Watermark
ColorQube™ 9301/9302/9303
Print139
Layout/Watermark
The Layout/Watermark tab contains 
settings for selecting page layout, booklet 
layout and watermark options.
Some features are only supported by 
specific printer configurations, operating 
systems, or driver types. You may see more 
features or options listed than your specific 
device supports.
Page Layout
Pages Per Sheet (N-Up)
Select this option to print 1, 2, 4, 6, 9, or 16 pages on each side of a sheet of paper. Selecting...

Layout/Watermark
ColorQube™ 9301/9302/9303
Print 140
Booklet Layout
Automatically prints 2 pages on each side of each sheet of 
paper.
The printer driver changes the order of the pages so that they 
can be folded and stapled to create a booklet.
To program additional booklet settings, select the Booklet 
Options button.
•Booklet Fold folds the booklet.
•Booklet Fold and Staple staples the booklet in the 
center and then folds.
•Gutter shifts the images to create a center margin for 
the booklet. Specify...