Xerox DocuPrint 255DN User Manual
Have a look at the manual Xerox DocuPrint 255DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Color Adjust Menu Chapter 1: Configuring the Printer v1-45 Color Defaults Set to allow “resetting” all color adjustment (Color Density, Black Density, and Color Balance) to their factory default values. The available values are: Yes No* Executing Color Defaults will reset to factory defaults values and cause a test print output, based upon those factory default values.1. Press Menu Up or Menu Down until you see: Menus Color Adjust 2. Press Item Up or Item Down until you see:Color Adjust Color Defaults 3. Press Va l u e U p or Va l u e D o w n until you see:Color Defaults New Value 4. Press Enter. You will see:Color Adjust Color Defaults 5. Press Online. You will see:Ready Table 1.11 Color Adjust Menu functions (continued) Menu Item and FunctionKeystrokesDisplay Table1.10 Page3 of 3 Downloaded From ManualsPrinter.com Manuals
Imaging Menu 1-46 vDocuPrint NC60 System Administrator Guide Imaging Menu Use the Imaging Menu to set imaging features as printer defaults. The menu hierarchy is shown in Figure 1.8. Refer to Table 1.12 on page 1-47 for step-by-step instructions. Figure 1.8 Imaging Menu hierarchy Vivid* Photo Unadjusted Edge SmoothingOn Off* Blk. Overprint Fast Black Job Menu Password Menu Tr a y M e n u PCL Menu System Menu Color Adjust Menu Imaging Menu Parallel Menu Serial Menu Ethernet Menu Token Ring Menu Novell Menu Print Menu Media Server Menu Service Menu Reset Menu Process Black Halftone TypeColor Mode Enh. Alignment Quad Dot Smooth Screen* 1200 Quality On Off* On Off* On Off* On Off* Downloaded From ManualsPrinter.com Manuals
Imaging Menu Chapter 1: Configuring the Printer v1-47 Table 1.12 Imaging Menu functions Menu Item and FunctionKeystrokesDisplay Edge Smoothing Set the default image (resolution) enhancement mode used in PCL and PostScript. The available values are: On Off* Edge Smoothing cannot be used when the Halftone Type is set to 1200 Quality.1. Press Menu Up or Menu Down until you see: Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Edge Smoothing 3. Press Va l u e U p or Va l u e D o w n until you see:Edge Smoothing = New Value 4. Press Enter. You will see:Imaging Menu Edge Smoothing 5. Press Online. You will see:Ready Color Mode Set to allow adjustment to the color mode. The available values are: Vivid* Photo Unadjusted 1. Press Menu Up or Menu Down until you see:Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Color Mode 3. Press Va l u e U p or Va l u e D o w n until you see:Color Mode = New Value 4. Press Enter. You will see:Imaging Menu Color Mode 5. Press Online. You will see:Ready Blk. Overprint Set to select Black Overprint operation. The available values are: On Off* 1. Press Menu Up or Menu Down until you see:Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Blk. Overprint 3. Press Va l u e U p or Va l u e D o w n until you see:Blk. Overprint = New Value 4. Press Enter. You will see:Imaging Menu Blk. Overprint 5. Press Online. You will see:Ready Table1.10 Page1 of 3 Downloaded From ManualsPrinter.com Manuals
Imaging Menu 1-48 vDocuPrint NC60 System Administrator Guide Halftone Type Set the halftoning method. The available values are: Quad Dot Smooth Screen* 1200 Quality 1. Press Menu Up or Menu Down until you see:Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Halftone Type 3. Press Va l u e U p or Va l u e D o w n until you see:Halftone Type = New Value 4. Press Enter. You will see:Imaging Menu Halftone Type 5. Press Online. You will see:Ready Enh. Alignment Set to improve image registration by enabling a skip pitch printing mode. The available values are: On Off* 1. Press Menu Up or Menu Down until you see:Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Enh. Alignment 3. Press Va l u e U p or Va l u e D o w n until you see:Enh. Alignment = New Value 4. Press Enter. You will see:Imaging Menu Enh. Alignment 5. Press Online. You will see:Ready Fast Black Enable or disable printing on the transfer drum seam when in monochrome mode. The available values are: On Off* Image quality will be enhanced by not allowing printing on seam.1. Press Menu Up or Menu Down until you see: Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Fast Black 3. Press Va l u e U p or Va l u e D o w n until you see:Fast Black = New Value 4. Press Enter. You will see:Imaging Menu Fast Black 5. Press Online. You will see:Ready Table 1.12 Imaging Menu functions (continued) Menu Item and FunctionKeystrokesDisplay Table1.10 Page2 of 3 Downloaded From ManualsPrinter.com Manuals
Imaging Menu Chapter 1: Configuring the Printer v1-49 Process Black Set to select process black operation. The available values are: On Off* 1. Press Menu Up or Menu Down until you see:Menus Imaging Menu 2. Press Item Up or Item Down until you see:Imaging Menu Process Black 3. Press Va l u e U p or Va l u e D o w n until you see:Process Black = New Value 4. Press Enter. You will see:Imaging Menu Process Black 5. Press Online. You will see:Ready Table 1.12 Imaging Menu functions (continued) Menu Item and FunctionKeystrokesDisplay Table1.10 Page3 of 3 Downloaded From ManualsPrinter.com Manuals
Parallel Menu 1-50 vDocuPrint NC60 System Administrator Guide Parallel Menu Use the Parallel Menu to set options for the parallel port connection. The menu hierarchy is shown in Figure 1.9. Refer to Table 1.13 on page 1-51 for step-by-step instructions. Figure 1.9 Parallel Menu hierarchy 5 ... 30* ... 300 Seconds Port EnableOn* Off Parallel PDL Job Menu Password Menu Tr a y M e n u PCL Menu System Menu Color Adjust Menu Imaging Menu Parallel Menu Serial Menu Ethernet Menu Token Ring Menu Novell Menu Print Menu Media Server Menu Service Menu Reset Menu Binary PS Port Timeout Bi-Directional Auto* PCL PostScript On Off* On* Off Downloaded From ManualsPrinter.com Manuals
Parallel Menu Chapter 1: Configuring the Printer v1-51 Table 1.13 Parallel Menu functions Menu Item and FunctionKeystrokesDisplay Port Enable Enable or disable the parallel port. The available values are: On* Off 1. Press Menu Up or Menu Down until you see:Menus Parallel Menu 2. Press Item Up or Item Down until you see:Parallel Menu Port Enable 3. Press Va l u e U p or Va l u e D o w n until you see:Port Enable = New Value 4. Press Enter. You will see:Parallel Menu Port Enable 5. Press Online. You will see:Ready Port Timeout Set the time for determining when to end an incomplete print job and poll the next port in the polling sequence. The available values are: 5 - 300 seconds (30* ) This item also causes an implicit job end such as Control D in PostScript or E in PCL, and invokes the emulation functions associated with this action (e.g., formfeed, reset, etc.). The time changes incrementally by 1 second each time either Va l u e U p or Va l u e D o w n is pressed. Holding down Va l u e U p or Va l u e D o w n causes continuous scrolling through the values.1. Press Menu Up or Menu Down until you see: Menus Parallel Menu 2. Press Item Up or Item Down until you see:Parallel Menu Port Timeout 3. Press Va l u e U p or Va l u e D o w n until you see:Port Timeout = New Value 4. Press Enter. You will see:Parallel Menu Port Timeout 5. Press Online. You will see:Ready Table1.13 Page1 of 2 Downloaded From ManualsPrinter.com Manuals
Parallel Menu 1-52 vDocuPrint NC60 System Administrator Guide Parallel PDL Set the default emulation for the parallel port. The available values are: Auto* PCL PostScript 1. Press Menu Up or Menu Down until you see:Menus Parallel Menu 2. Press Item Up or Item Down until you see:Parallel Menu Parallel PDL 3. Press Va l u e U p or Va l u e D o w n until you see:Parallel PDL = New Value 4. Press Enter. You will see:Parallel Menu Parallel PDL 5. Press Online. You will see:Ready Binary PS Enable or disable the binary mode of PostScript. The available values are: On Off* 1. Press Menu Up or Menu Down until you see:Menus Parallel Menu 2. Press Item Up or Item Down until you see:Parallel Menu Binary PS 3. Press Va l u e U p or Va l u e D o w n until you see:Binary PS = New Value 4. Press Enter. You will see:Parallel Menu Binary PS 5. Press Online. You will see:Ready Bidirectional Enable or disable bidirectional communications through the parallel port. The available values are: On* Off 1. Press Menu Up or Menu Down until you see:Menus Parallel Menu 2. Press Item Up or Item Down until you see:Parallel Menu Bidirectional 3. Press Va l u e U p or Va l u e D o w n until you see:Bidirectional = New Value 4. Press Enter. You will see:Parallel Menu Bidirectional 5. Press Online. You will see:Ready Table 1.13 Parallel Menu functions (continued) Menu Item and FunctionKeystrokesDisplay Table1.13 Page2 of 2 Downloaded From ManualsPrinter.com Manuals
Serial Menu Chapter 1: Configuring the Printer v1-53 Serial Menu Use the Serial Menu to set options for the serial port connection. The menu hierarchy is shown in Figure 1.10. Refer to Table 1.14 on page 1-54 for step-by-step instructions. Figure 1.10 Serial Menu hierarchy 5 ... 30* ... 300 Seconds Port EnableOn* Off Serial PDL Job Menu Password Menu Tr a y M e n u PCL Menu System Menu Color Adjust Menu Imaging Menu Parallel Menu Serial Menu Ethernet Menu Token Ring Menu Novell Menu Print Menu Media Server Menu Service Menu Reset Menu Binary PS Port Timeout Baud Rate Auto* PCL PostScript 38400 28800 19200 9600* 4800 2400 1200 600 Flow ControlXON/XOFF Robust XON/XOFF Hardware* On Off* Downloaded From ManualsPrinter.com Manuals
Serial Menu 1-54 vDocuPrint NC60 System Administrator Guide Table 1.14 Serial Menu functions Menu Item and FunctionKeystrokesDisplay Port Enable Enable or disable the serial port. The available values are: On* Off 1. Press Menu Up or Menu Down until you see:Menus Serial Menu 2. Press Item Up or Item Down until you see:Serial Menu Port Enable 3. Press Va l u e U p or Va l u e D o w n until you see:Port Enable = New Value 4. Press Enter. You will see:Serial Menu Port Enable 5. Press Online. You will see:Ready Port Timeout Set the time for determining when to end an incomplete print job and poll the next port in the polling sequence. The available values are: 5 - 300 seconds (30*) This item also causes an implicit job end such as Control D in PostScript or E in PCL, and invokes the emulation functions associated with this action (e.g., formfeed, reset, etc.). The time changes incrementally by 1 second each time either Va l u e U p or Va l u e D o w n is pressed. Holding down Va l u e U p or Va l u e D o w n causes continuous scrolling through the values.1. Press Menu Up or Menu Down until you see: Menus Serial Menu 2. Press Item Up or Item Down until you see:Serial Menu Port Timeout 3. Press Va l u e U p or Va l u e D o w n until you see:Port Timeout = New Value 4. Press Enter. You will see:Serial Menu Port Timeout 5. Press Online. You will see:Ready Table1.14 Page1 of 3 Downloaded From ManualsPrinter.com Manuals