Xerox Phaser 6350 DX User Manual
Have a look at the manual Xerox Phaser 6350 DX User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuring the Network Address Phaser® 6300/6350 Color Laser Printer 2-6 Dynamic Methods of Setting the Printer’s IP Address Set the printer’s IP address using any of the following methods. DHCP is enabled by default on all Phaser printers. ■DHCP ■CentreWare IS ■AutoIP Enabling DHCP on the Printer Verify that the printer DHCP protocol is enabled by setting the control panel or by using CentreWare IS. DHCP is enabled by default on all Phaser printers. Note:To determine the printer’s IP address, select Printer Identification on the control panel. See also: Control Panel Features on page 1-6 Changing or Modifying the IP Address Using CentreWare IS CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. For complete information about CentreWare IS, click the Help button in CentreWare IS to go to the CentreWare IS Online Help. After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS. 1.Launch your web browser. 2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx). 3.Click Properties. 4.Select the Protocols folder on the left sidebar. 5.Select TCP/IP. 6.Enter or modify the settings, and then click Save Changes at the bottom of the page. Information Required for Manual IP Addressing Information Comments Internet Protocol (IP) address of the printer Format is xxx.xxx.xxx.xxx, where xxx represents a decimal number from 0–255. Network Mask If you are unsure, leave this blank; the printer chooses an appropriate mask. Default Router/Gateway address Router address is required to communicate with the host device from anywhere other than the local network segment. Downloaded From ManualsPrinter.com Manuals
Configuring the Network Address Phaser® 6300/6350 Color Laser Printer 2-7 Using Host Names with the Domain Name Service (DNS) The printer supports DNS through an embedded DNS resolver. The DNS resolver protocol communicates with one or more DNS servers to resolve the IP address for a given host name or the host name for a given IP address. To use an IP host name for the printer, the system administrator must configure one or more DNS servers and a local DNS domain name space database. To set up the printer for DNS, supply a maximum of two DNS name server IP addresses. Dynamic Domain Name Service (DDNS) The printer supports Dynamic DNS through DHCP. You must have DHCP enabled on the printer for DDNS to function. Your network’s DHCP server must also support Dynamic DNS updates through option 12 or option 81 support. See your network administrator for details. 1.Launch your web browser. 2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx). 3.Select Properties. 4.Select the Protocols folder on the left sidebar. 5.Select TCP/IP. 6.In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to ON. 7.To enable DDNS, enter the following DDNS/WINS settings information: ■DDNS: Set to ON. ■Release Host Name: Set to NO. ■DDNS/WINS Name: Use the default name provided by Xerox or enter another name. ■Primary WINS Server (optional) ■Secondary WINS Server (optional) 8.Click Save Changes when you are finished entering the settings. Downloaded From ManualsPrinter.com Manuals
Configuring the Network Address Phaser® 6300/6350 Color Laser Printer 2-8 Manually Setting the Printer’s IP Address Note:Verify that your computer has a properly configured IP address for your network. Contact your network administrator for more information. If you are on a network without a DNS server, or in an environment where the network administrator assigns printer IP addresses, you can use this method to manually set the IP address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are in a small office with a single PC and use a dialup modem connection, you can manually set the IP address. 1.On the control panel, select Printer Setup, and then press the OK button. 2.Select Connection Setup, and then press the OK button. 3.Select Network Setup, and then press the OK button. 4.Select TCP/IP Setup, and then press the OK button. 5.Select DHCP/BOOTP, and then press the OK button to select Off. 6.Select TCP/IP Address, and then press the OK button. 7.Enter the printer’s IP address, and then press the OK button. Downloaded From ManualsPrinter.com Manuals
Installing the Printer Drivers Phaser® 6300/6350 Color Laser Printer 2-9 Installing the Printer Drivers This section includes: ■Available Drivers on page 2-9 ■Windows 98 SE or Later and Windows 2000 or Later on page 2-10 ■Macintosh OS X, Version 10.2 and Higher on page 2-11 Available Drivers To access special printing options, use a Xerox printer driver. Xerox provides drivers for a variety of page description languages and operating systems. The following printer drivers are available: * Go to www.xerox.com/office/drivers for the latest printer drivers. Printer Driver Source* Description Windows PostScript DriverCD-ROM and WebThe PostScript driver is recommended to take full advantage of your systems custom features and genuine Adobe® PostScript®. (Default printer driver) PCL DriverWeb only The Printer Command Language driver can be used for applications requiring PCL. Note:For Windows 2000 and Windows XP only. Xerox Walk-Up Printing Driver (Windows)Web only This driver enables printing from a PC to any Xerox PostScript-enabled printer. This is especially helpful for mobile professionals who travel to multiple locations and need to print to different printers. Macintosh OS 9.x DriverCD-ROM and WebThis driver enables printing from a Mac OS 9.x operating system. Mac OS X (version 10.2 and higher) DriverCD-ROM and WebThis driver enables printing from a Mac OS X (version 10.2 and higher) operating system. UNIX DriverWeb only This driver enables printing from a UNIX operating system. Downloaded From ManualsPrinter.com Manuals
Installing the Printer Drivers Phaser® 6300/6350 Color Laser Printer 2-10 Windows 98 SE or Later and Windows 2000 or Later To install the printer driver from the Software and Documentation CD-ROM: 1.Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch, do the following: a.Click Start, and then click Run. b.In the Run window, type: :\INSTALL.EXE. 2.Select your desired language from the list. 3.Select Install Printer Driver. 4.Select the installation method you want to use, and then follow the onscreen instructions. See also: infoSMART Knowledge Base Networking Documents (English only) on page 2-12 Macintosh OS 9.X USB A USB-connected printer does not display in the Chooser. To create a desktop USB printer: 1.Insert the Software and Documentation CD-ROM into the CD-ROM drive. 2.Use the Desktop Printer Utility to create a desktop USB printer. The utility is located in the PhaserTools folder that is created during the software installation. See also: infoSMART Knowledge Base Networking Documents (English only) on page 2-12 Advanced Features Guide at www.xerox.com/office/6300_6350support EtherTalk Note:If you use EtherTalk, Macintosh computers do not require IP addresses. Follow these steps to install the printer driver: 1.Open the AppleTalk Control Panel. 2.Verify that the Ethernet port is the selected network port. 3.Double-click the installer on the Software and Documentation CD-ROM to install the printer driver. 4.Open the Chooser, and then click the LaserWriter driver. 5.From the right column of the Chooser, select the printer, and then click Create to create the desktop printer. Downloaded From ManualsPrinter.com Manuals
Installing the Printer Drivers Phaser® 6300/6350 Color Laser Printer 2-11 Macintosh OS X, Version 10.2 and Higher To install the printer driver from the Software and Documentation CD-ROM: 1.Insert the CD-ROM into the CD-ROM drive. 2.Open the Print Center utility. Note:In Macintosh OS X version 10.3 or higher, the utility is called Printer Setup Utility. To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder. 3.Click the Add icon in the Printer List window, and then select Rendezvous from the drop- down menu. 4.Select the printer in the window. 5.Select Xerox from the list of manufacturers in the lower drop-down menu. 6.Select the appropriate printer model from the list of available devices. 7.Click the Add button. See also: infoSMART Knowledge Base Networking Documents (English only) on page 2-12 Downloaded From ManualsPrinter.com Manuals
infoSMART Knowledge Base Networking Documents (English only) Phaser® 6300/6350 Color Laser Printer 2-12 infoSMART Knowledge Base Networking Documents (English only) For more information, go to www.xerox.com/office/6300_6350infoSMART to view these documents. Reference Name Title R1019019389 Basic TCP/IP Tutorial and Home Networking Guidlines R1019019367 Understanding TCP/IP Addressing and Subnetting Basics R1019019442 Installing the Printer Driver in Windows 9x When Using a USB Connection R1019019447 Installing the Printer Driver in Windows 2000 When Using a USB Connection R1019019479 Installing the Printer Driver in Windows XP When Using a USB Connection R1019019483 Installing the Printer for a USB Connection in Mac OS 9 R1019019485 Installing the Printer for a USB Connection in Mac OS X 10.3.1 (and later) Downloaded From ManualsPrinter.com Manuals
Phaser® 6300/6350 Color Laser Printer 3-1 This section includes: ■Overview of Basic Steps on page 3-2 ■Supported Paper and Media on page 3-3 ■Loading Paper on page 3-8 ■Selecting Printing Options on page 3-16 ■Printing on Both Sides of the Paper on page 3-20 ■Printing on Specialty Media on page 3-22 See also: Using paper trays video tutorials at www.xerox.com/office/6300_6350support Printing Basics Downloaded From ManualsPrinter.com Manuals
Overview of Basic Steps Phaser® 6300/6350 Color Laser Printer 3-2 Overview of Basic Steps To print jobs: 1.Load paper in the tray. 2.If you are prompted by the control panel, either confirm the paper type and size or change it as required. 3.From the software application, access the Print dialog box, and then select printing options in the printer driver. 4.Send the job to the printer from the software application’s Print dialog box. See also: Loading Paper on page 3-8 Selecting Printing Preferences (Windows) on page 3-16 Selecting Printing Options on page 3-16 Downloaded From ManualsPrinter.com Manuals
Supported Paper and Media Phaser® 6300/6350 Color Laser Printer 3-3 Supported Paper and Media This section includes: ■Paper Usage Guidelines on page 3-4 ■Paper That May Damage Your Printer on page 3-4 ■Paper Storage Guidelines on page 3-5 ■Supported Paper Sizes and Weights on page 3-5 Your printer is designed to be used with a variety of paper types. Follow the guidelines in this section to ensure the best print quality and to avoid jams. For best results, use Xerox printing media specified for your Phaser 6300⁄6350 printer. They are guaranteed to produce excellent results with your printer. Caution:Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details. See also: Recommended Media List at www.xerox.com/office/6300_6350support To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies . Downloaded From ManualsPrinter.com Manuals