Yamaha Cl 5 User Guide

EN
How to Use This Reference ManualThe CL5/CL3/CL1 Reference Manual (this document) allows you 
to search for terms and take advantage of links in the text.Searching for termsTo search for a term, use the search function of the software 
you're using to view this document.
If you're using Adobe Reader, enter the term in the search box 
and press the  key of your computer keyboard to search 
for occurrences of that term.Displaying the next/previous viewIf you're using Adobe Reader, you can...

Table of contents
 Reference Manual
2
Table of contents
How to Use This Reference Manual ..........................................................................  1
Function Tree ............................................................................  4
SELECTED CHANNEL section ......................................................  6
Operations in the SELECTED CHANNEL Section .......................................................  6
Centralogic section...

Table of contents
 Reference Manual
3
Using the Premium Rack ......................................................................................  144
Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries ............  153
I/O devices and external head amps ....................................  154
Using an I/O device .............................................................................................  154
Remotely controlling an R series unit...

Function Tree
 Reference Manual
4
Function TreePage numbers in parentheses ( ) are the page numbers of the 
Owner's Manual(booklet).Main
SELECTED CHANNEL6
OVERVIEW13
FUNCTION ACCESS AREA (18)CHANNEL PARAMETER
PAT C H / N A M E18, 28, 50
GAIN/PATCH29
1ch29
8ch30
CH1-4832
CH49-72/ST IN32
OUTPUT
Indication only
INPUT DELAY40
8ch41
CH1-4842
CH49-72/ST IN42
DELAY SCALE41
INSERT/DIRECT OUT 21
1ch21, 24
8ch22, 24
HPF/EQ58
1ch58
8ch60
CH1-4860
CH49-72/ST IN60
OUTPUT60
DYNAMICS61
1ch61
KEY IN SOURCE SELECT62...

Function Tree
 Reference Manual
5
NOTE• The explanations in this reference manual will use the CL5.
• In the case of the CL3/CL1, some screens will not show 
channels and faders that do not exist on those models. OUTPUT PORT56
MIDI/GPI165, 237
MIDI SETUP166
PROGRAM CHANGE168
CONTROL CHANGE171
GPI238
FADER START241
BUS SETUP223
CONSOLE LOCK210
DATE/TIME225
NETWORK226
DANTE SETUP226
SCENE
SCENE LIST88
GLOBAL PASTE93
Fade time97
SONG SELECT100
FOCUS RECALL95RECORDER
USB173
NUENDO LIVE182CH JOB
CH LINK...

SELECTED CHANNEL section
 Reference Manual
6
SELECTED CHANNEL sectionThe SELECTED CHANNEL section located at the left of the display corresponds to a channel 
module of a conventional analog mixer, and allows you to use the knobs on the panel to set 
all the major parameters of the currently-selected channel.
Operations in this section will affect the channel that was most recently selected by its [SEL] 
key. If you have assigned an ST IN channel or STEREO channel to a single channel strip, 
either the L...

SELECTED CHANNEL section
 Reference Manual
7
SELECTED CHANNEL VIEW screenSEND fieldIn this field, you can view the send level and pre/post from the channel 
to each MIX/MATRIX bus. You can also switch the on/off status of the 
send signals. The view and the function of the knobs and buttons in 
the SEND field vary depending on whether a pair of bus channels 
(odd-numbered and even-numbered) are comprised of two mono 
channels or a stereo channel.1
Ta b s
Enable you to select a group of 16 output bus...

SELECTED CHANNEL section
 Reference Manual
8
GAIN/PATCH fieldThis field enables you to make HA (head amp) analog or digital gain settings. You can also 
view the operational status of the head amp.1
GAIN knob
Sets the analog gain/digital gain of the head amp.
Press the knob to open the GAIN/PATCH 1ch window.
2
GC indicator
Indicates the fixed gain value output to the audio 
network if the Gain Compensation function is turned 
on.
3
OVER indicator
Warns you when the signal is clipping.
4
Ø (Phase)...

SELECTED CHANNEL section
 Reference Manual
9
When using Surround mode (MIX1- MIX6)3
DOWN MIX
This field enables you to view the downmix 
coefficient and L/R button settings.
Press this field to open the TO STEREO/MONO 
window.
INPUT DELAY fieldThis field enables you to view the delay settings.1
ON indicator
Indicates the on/off status of the delay.
2
Delay time
The delay value is displayed by milliseconds (ms) and also by currently-selected scale. If 
the scale uses units of ms, the value in the bottom...

SELECTED CHANNEL section
 Reference Manual
10
EQ graph fieldThis field graphically indicates the approximate response of the EQ. Press this field to open 
the HPF/EQ 1ch window, in which you can set the attenuator, HPF, and EQ.DYNAMICS1/DYNAMICS2 fieldThis field enables you to set the Dynamics 1/2 parameters.1
OVER indicator
Warns you when the signal is clipping.
2
Level meter
Displays the output signal level (green) and the amount of gain reduction (orange) 
when the Dynamics is on. The current...