Yamaha Dpx 1100 User Manual

YAMAHA  ELECTRONICS  CORPORATION,  USA  6660  ORANGETHORPE  AVE.,  BUENA  PARK,  CALIF.  90620,  U.S.A.
YAMAHA  CANADA  MUSIC  LTD.  135  MILNER  AVE.,  SCARBOROUGH,  ONTARIO  M1S  3R1,  CANADA
YAMAHA  ELECTRONIK  EUROPA  G.m.b.H.  SIEMENSSTR.  22-34,  25462  RELLINGEN  BEI  HAMBURG,  F.R.  OF  GERMANY
YAMAHA  ELECTRONIQUE FRANCE  S.A.  RUE  AMBROISE  CROIZAT  BP70  CROISSY-BEAUBOURG  77312  MARNE-LA-VALLEE  CEDEX02,  FRANCE
YAMAHA  ELECTRONICS  (UK)  LTD.  YAMAHA  HOUSE,  200  RICKMANSWORTH  ROAD...

• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance....

FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded
cables. Cable/s supplied with this product MUST be used.
Follow all installation...

Caution: Read this before operating this unit.
• To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Installation
• Install this unit in a well-ventilated, cool, dry, clean place with
at least 30 cm (1 feet) clearance on the top, right and left, and
at the back of this unit — away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
• Locate this unit away from other electrical appliances, motors,
or transformers to...

1
Table of contents
1 Getting started 2
Inappropriate places for installation ........ 2
Accessory check .................................... 2
2 Features 3
3 Controls and functions 4
4 Remote control 6
5 Preparation 10
6 Projection 12
Checking installation and connections ...12
Turning the projector power on ............ 13
Selecting an input signal ...................... 15
Adjusting the image ............................. 20
7 Menu 22
Menu configurations ............................. 22
Menu items...

2

Inappropriate places for installation
If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place
to install this unit by avoiding the places listed below.
1. Places where the temperature and humidity vary greatly
•Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely
low.
•This unit must be used within a temperature range of 5—35°C.
2....

3
Features
2
Adjust 7 colors independently (including white), or use the
automatic color balance function
The DPX-1100 allows you to adjust the 7-axis WRGBYCM color coordinate and gain
parameters directly. For better consistency, you can also control color temperature and RBG
balance together, allowing you to check that the changes you make are always consistent with
your preferences.
The latest digital interface provides sharp, detailed images
The DPX-1100 is equipped with an HDMI terminal, which is set...

4

Main unit 
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPEMENU
INPUT
DIGITAL CINEMA PROJECTOR DPX-1100
ASPECT
1
2
3
4
5
16
7
8
9
0
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPEMENU
INPUT ASPECT
A
E
BCD
2STANDBY/ON button
Switches the unit between Standby and On (operational)
modes.
3ESCAPE button
Exits from submenus.
4PATTERN button
Switches the built-in test pattern on and off.
5ASPECT button
Turns the display aspect menu for the project image on and off.
6 (Enter) button
Sets values...

5
Controls and functions
3
HDMI
G/Y B/PB/CBR/PR/CR
INPUT A
HD/SYNC
VD
OUT IN
REMOTETRIGGER OUT
S VIDEOVIDEO
INPUT B
RGB/YP
BPR/YCBCR
RS-232C
D4 VIDEO
q
8
765432190wer

Main unit 
1INPUT B (D-sub 15 pin)
Receives component video and RGB (RGB/YPBPR/YCBCR)
signals. Use a D-sub monitor cable to connect components to
this jack.
2D4 VIDEO (D jack)
Receives signals output from the D jacks of other AV
components. It is compatible with D1 - D4 formats.
3- 7 INPUT A (BNC jacks)
Receive component video and RGB...

6
45
RESET
6 123
VIDEO STILLHIDE
PATT IRIS AUTOSETTING
ZOOM FOCUS V. POS
LIGHT
BD4
S VIDEOA
INPUT
MEMORY
HDMI
INPUT
MENU
ASPECT
ESCAPE
o i u y t
p r e 1
2
3
4
5
6
7
8
9
0
q
w

Remote control functions
Buttons on the remote control with identical names to those on the main unit perform identical functions. When using the remote control,
point it at the remote control sensor on the front or back of the main unit from a distance of 7m (23 feet) or less.
1Transmit indicator
Lights up when the remote control...