Yamaha Dpx 1100 User Manual

27
Menu
7
Color Adjustment 
(Input signal)
Video/S-Video/Component/
RGB TV/RGB PC
Adjusts color balance.
There are three menus available, [Standard], [WRGB], and [WRGBYCM], separated in order
of complexity from simple to detailed. Refer to page 36 for parameter operation methods.
The present color temperature setting is displayed to the right of the menu items.
- Standard
Adjusts color temperature and hUV only.
hUV adjusts values within the maximum
color temperature limits of the projector.
- WRGB...

28
Menu items

 Signal
You can adjust the image when the unit is receiving an input signal.
Display Aspect Ratio
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Sets the aspect ratio for projecting an image from an input signal.
See “Selecting a display aspect for projecting images”, page 17.
Overscan 
(Input signal)
Video/S-Video/Component/RGB TV
Overscans video input sources for display.
Selects from [Standard] and [Full].  This parameter is not available when you select [Smart
Zoom] in [Display...

29
Menu
7
Menu items
Setup Level (HDTV)
(Input signal)
Component/RGB TV
Compensates for differences in the black levels of HDTV images.
Usually, choose [0%].
•For signals equal to the pedestal level : Set to [0%].
•For signals with high levels of blackness : Set to [7.5%].
Clamp Position 
(Input signal)
Component/RGB TV
Adjusts the clamp position for analog video sources.
Choices: -30 to +30
Horiz. Display Position
(Input signal)
RGB PC (except for HDMI signals)/
Component/RGB TV
Adjusts the horizontal...

30

 Initial
Menu items
Color SystemSelects the color system to use for video input signals.
Usually, set this parameter to Auto to have the unit automatically detect the signal and
select an appropriate color system. Set the unit manually to view NTSC4.43 images as it
cannot detect NTSC4.43 automatically.
Choices: Auto/NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60/SECAM
INPUT A Sync Type Selects the sync type for signals received at INPUT A.
This function is only available for RGB TV.
Choices: Auto/Separate...

31
Menu
7
Menu items

 Setup
LocationDesignate the location of the main unit.
Choices: [Front/Table] [Front/Ceiling] [Rear/Table] [Rear/Ceiling] ( page 48)
Keystone CorrectionAdjusts the projection angle of the image.
If you do not install the projector at right angles to the screen, the image will be trapezoidally
distorted. You can electronically correct this distortion using the keystone function to adjust the
width without changing the height of the image. Increase the keystone value (0 to 100) when...

32
Menu operations

Operation button functions
Use the buttons on the remote control or the main unit to operate the menus. The button functions are listed below.
1Menu Button
Opens/Closes the menu.
2Cursor button
+ / - (Move the cursor ringht/left)
•Selects menu groups.
•Opens/Closes submenus.
•Selects/Changes settings.
h / g (Moves the cursor up/down)
•Selects menu items.
•Selects/Changes settings.
3 button
•Confirms setting changes.
•Opens the in-line menu when the menu is not open.
•Selects special...

33
Menu
7
Menu operations

Menu operations 1 (with no submenu)
Menu operations use the procedure below to adjust menu item without submenus.
1. Open the menu screen.
Press the MENU button to open the menu
screen.
Memo
•If you have opened the menu screen
previously, the menu displays the
settings from the last time you used it.
2. Select a menu group.
Use the +/- buttons to select a menu group.
The illustration at right depicts the [Setup]
group being selected.
Menu items related to the selected menu...

34
6. Close the menu screen.
When you have finished making
adjustments, press the MENU button to
close the menu screen. 5. Move to another item or group.
Memo
•Use the h / g buttons to move the
cursor to another item in the same
group.
To move to an item in another menu
group, press ESCAPE or the h button
to return to the top of the menu group,
and repeat steps 2,3 and 4. Remote Control Main Unitor
Menu operations
4. Choose a setting for the item.
Use the +/- buttons to select a suitable
setting.
The...

35
Menu
7
Menu operations

Menu operations 2 (with submenus)
Use the procedure below to adjust menu items that contain submenus.
1. Select a menu item.
Carry out steps 1-3 of “Menu Operations 1”
to select the item you want to set.
The illustration at right depicts [Display
Language] in the [Initial] group selected.
Memo
•A  appears to the right of items that
contain a submenu.
Remote Control Main Unitor
Color System
VIDEO
INPUT A SignalINPUT A Sync TypeINPUT B SignalINPUT B Sync Type
Auto Power OffAuto...

36 

Special menu operations
Some items in the menu require special methods to configure.
VIDEOMemory 1 Initial Setup
nu Window
Gain 0.82
y
0.3 0.35
0.6 0.65x
x=0.640     y=0.330
Image SignalMove Me
n
: Edit
y
0.5
0.0
0.0 0.5 x
Red
Example: Adjusting R (Red)
The name of the
selected item appears
here.
Use the cursor buttons
to select an item.Press the 
 button.
Press the ESCAPE
button.Color coordinate
display area
Color coordinate
adjustment area
Press the  button to
change the item to adjust.
Gain...