Home > Yamaha > Musical Instruments & Equipment > Yamaha Ysp1 Service Manual

Yamaha Ysp1 Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Yamaha Ysp1 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							YSP-1
    11
    YSP-1
    Installation of Driver (Tweeter)
    Caution : Make sure that all the removed Driver (tweeter)
    parts are reinstalled at specified positions.
    (Fig. B)
    µÐ”§”âÇ¿Ä¢À ”»”£w	
    						
    							YSP-1
    12
    YSP-1
    DD
    E E
    B B
    CC CC
    Side Cover L
    ± Å§Ì”-
    Side Cover R
    ± Å§Ì”3
    Plate Side
    Óè”Ä—± Å Plate Side
    Óè”Ä—± Å Plate Cover
    Óè”Ä—§Ì”
    Plate Cover
    Óè”Ä—§Ì” Front Grille
    ÑéïĬæçDriver, Woofer
    
    Driver, Woofer
    
    7. Removal of Driver (Woofer)
    a. Remove 4 screws (B). (Fig. 12)
    b. Remove the Side covers L/R.
    c. Remove the Plate/Cover.
    d. Remove 4 screws (C). (Fig. 12)
    e. Remove the Plate/Side.
    f. Remove 18 screws (D). (Fig. 12)
    g. Remove the Front grille.
    h. Remove 8 screws (E). (Fig. 12)
    i. Remove the Driver (Woofer).
     
    						
    							YSP-1
    13
    YSP-1
    ~34$
    						
    							YSP-1
    14
    YSP-1
    Ô 
    â^MO
    $16w	Ôù
     1$tMBTI4UBFYF
    						
    							YSP-1
    15
    YSP-1
    
    						
    							YSP-1
    16
    YSP-1
     For DSP
    1. Install spDownloader_2_0_7_xxx.exe into the PC.
    2. Before turning on the power to YSP-1 and PC, connect
    between RS232C ports with the RS232C cable (cross
    cable). (Fig. 1)
    3. Connect the power cable of YSP-1 to the AC outlet.
    While pressing the “VOL+” key and “VOL-” key of the
    YSP-1, press the “STANDBY/ON” key of the remote
    controller to activate the DIAG function.
    1Using the “UP” or “DOWN” key of the remote
    controller, select the DIAG menu in the figure below.
    %41w	
    						
    							YSP-1
    17
    YSP-1
    Select the port of RS-232C
    
    €`oM”34$ٔě
    ¬R`‡b
    Select SPCM Protocol
    41$.Óéįç›
    ¬R`‡b
    5. Select the data to be transmitted and port.
    · COM Port
    Select the port of RS-232C.
    · D/load Protocol
    Select “SPCM Protocol” 
    
    						
    							YSP-1
    18
    YSP-1
    Confirm “OK”
     0,¡pK”\q›¬Ý`‡b
    3After downloading sccessfully, “Download ‘*****’ OK”
    is appeared.
    Confirm “DLOAD OK” on the Serial Log window.3
    	{V
    						
    							YSP-1
    19
    YSP-1
    1Using the “UP” or “DOWN” key of the remote
    controller, select the DIAG menu in the figure below.
    						
    							YSP-1
    20
    YSP-1SELF DIAGNOSIS FUNCTION (DIAG) / ×~
    
    …;ó¢¼ ž¬£
    There are 14 DIAG menu items, each of which has sub-
    menu items. Listed in the table below are menu items and
    sub-menu items.
    						
    All Yamaha manuals Comments (0)

    Related Manuals for Yamaha Ysp1 Service Manual