Aimco Brakes Freedom3 PRW Sqnet User Manual

 
 
   [email protected]     
11  
Sending Back Data Results to SQnet FTA 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
In the same way the route was uploaded to Freedom³, user can collects data by USB cable 
communication from Freedom³ to SQnet FTA. After data results are downloaded, SQnet FTA will 
display the status of every single tightening, the associated statistic, torque/time and torque/angle 
curves. 
 
 
 
 
 
 
 
 
 
SQnet 
FTA  

 
12 
 
12 Freedom³ PRW mode  Tour 
 
Freedom³ PRW mode function table 
 
  
In Brief: 
LIST OF FUNCTIONS PRW 
Version and Memory:  
Working with all firmware version Yes 
Store data-results and curves in Freedom³ memory Yes 
Programming:  
Edit  tests directly on Freedom³ X 
Route from/to SQ-Net Yes 
Receive program from VPG in real time Yes 
Send data and Curves to F3 Explorer X  
SPC Quality Control test Yes 
Production Tightening Yes 
Joint Analysis X 
Continuous Reading Yes 
Cp/Cm Test X 
Counter...

 
 
   [email protected]     
13  
Freedom³ PRW mode Options and Software table 
 
  
In Brief: 
List of Functions PRW 
Options:  
Internal Bar Code Reader Yes 
Bluetooth Integrated Module Yes 
868 MHz Integrated Module Yes 
WiFi Integrated Module  Yes 
Automatic Socket Recognition Yes 
Rubber Protection Yes 
Rubber Protection with Display Protection Yes 
  
Single Battery Charger (External) Yes 
Dual Battery Charger (External) Yes 
  
Software  
SQnet FTA software Yes 
F3 Explorer software X 
VPG...

 
14 
 
14 SYSTEM OVERVIEW 
SYSTEM OVERVIEW 
 
 
In the following chapters we will show the main technical Characteristics of Freedom³ . 
 
 
Technical Specification 
 
 
 
 
 
Torque 
Capacity 
(Nm) 
Connection (end- 
Fitting) L1 (mm) L2 (mm) Weight (kg) 
15 9x12 Female 375 393 0,8 
30 9x12 Female 375 393 0,86 
70 9x12 Female 480 498 0,93 
100 9x12 Female 480 498 0,93 
200 14x18 Female 604 629 1,5 
300 14x18 Female 754 779 1,86 
400 14x18 Female 854 879 2 
600 14x18 Female 1032 1057 3,65 
800 Ø 20 1250...

 
 
   [email protected]     
15  
 
Measurement accuracy: 
 
±0.5% deviation between 20% and 100% of torque capacity 
±1% deviation between 10% and 20% of torque capacity 
±0.1°angle display deviation 
 
 
 
Performance: 
 
Internal Memory 1 GB. 
20000 results; 20000 curves; 1000 Programs Settable. 
2.8” Touch-Screen (for easy and fast navigation). High Resolution. 
Display 320 x 240 pixel, 65535 colors. 
 
Keyboard (for switching on/off and navigation). 
Barcode Reader (to add vin-number info to the...

 
16 
 
16 SYSTEM OVERVIEW 
Connections 
 
 
Ports and Interfaces: 
 
Mini-B USB 2.0 (For SCS software and battery charger  Connection) 
4 Pin connector for battery charging by cradle (optional) 
 
Keyboard and touch screen for programming and navigation: 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
17  
1 led green and 1 led red to indicate the status of the tightening or test: 
 
 
 
 
 
 
7 led blue to indicate the tightening progression: 
 
 
 
 
 
 
 
 
Software 
To allow users to download data or communicate with PC, we developed 3 software, F3 Explorer 
(for Lab version) and SQ-Net  (for SPC version). VPG  Visual Production Guide (for PRW version) 
The minimum system requirements to install and use SQnet FTA: 
 
CPU:    Pentium II  
 
Hard Disk Space: 100 MB...

 
18 
 
18 Starting 
Starting 
 
 
To work with Freedom³ PRW mode, user has to upload a route by SQnet FTA, in the following 
paragraphs  we will show how to start quickly to work with Freedom³ and SQnet FTA. 
With Freedom³ PRW is not possible to create program directly from the wrench. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
19  
PRW mode working with SQnet FTA 
 
 
Introduction: 
PRW mode is a firmware version of Freedom³ that allows user to work in remote way, 
programming Freedom³ from SQnet FTA software. 
In PRW mode is not possible to edit programs locally (only for Lab mode). 
To program Freedom³ is necessary to install SQnet FTA on PC. 
In the next paragraphs we will show you how send/receive a route (list of test) from/to SQnet FTA 
and how execute test. 
SQnet FTA 
 
 
As explained in...

 
20 
 
20 PRW mode working with SQnet FTA 
Build a tree structure and edit Location with SQnet FTA 
 
 
 
Start SQnet FTA and:  
 
    
 
Click on SQnet FTA icon to run it 
 
 
 
 
 
Select “test definition” icon from main page of SQnet FTA: