Aimco Brakes Freedom3 PRW Sqnet User Manual

 
 
   [email protected]     
41  
 
 
 
Click on “Leds” Tab: 
 
 
 
 
 
 
Note: 
In this page is possible to customize the percentage to light every single led on the wrench 
considering the target.   
 
 
 
 
 
  

 
42 
 
42 PRW mode working with SQnet FTA 
 
 
 
 
 
Click on “Batch” Tab:  
 
 
 
 
 
 
Note: 
Inside Batch Tab is possible to multiply the number of screws to tighten. For example, usually to 
mount a wheel on the car there are 4 or 5 screws to tighten with the same strategy for all screws. 
=n this Tab is possible to define how many screws “Freedom³ has to tighten”. 
 
 
 
 
  

 
 
   [email protected]     
43  
 
 
 
 
 
See  table below  to fill correctly all fields. 
 
Fields Meaning 
Screws nr In this field, user has to indicate the number of 
screws to tighten with Freedom³ (for example if 
there are 3 screws, SQ-net will send to 
Freedom³ 3 time the same tightening program) 
Enable batch Click on check box in order to enable Batch 
function 
Strategy In this field is possible to define the strategy in 
order to drive the wrench considering the 
status of the tightening:...

 
44 
 
44 PRW mode working with SQnet FTA 
 
 
How to create a route 
 
 
A route is a group of tightening strategies. Freedom³ PRW mode can receive only tightening 
program route. To send tightening programs from SQnet FTA to Freedom³, before user must 
create a route in SQnet FTA. 
From SQnet FTA start page, select route management icon: 
 
Click on Route Management Icon : 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
45  
 
 
 
A new window appears: 
 
 
 
 
 
 
 
 
 
  

 
46 
 
46 PRW mode working with SQnet FTA 
 
 
 
 
 
In route management window is possible : 
 
ICON FUNCTIONS 
 
Select an existing route in order to add or remove 
tightening programs 
 
Edit a new route 
 
Modify a route 
 
Delete a route 
 
Add and remove test from route 
 
Select test from route 
 
 
 
    
Click on new route to create a new one 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
47  
 
 
 
 
It appears a new window “Add a new route”: 
            
 
             
             
      
 
 
 
Here, user must select the right type of route: 
Freedom wrenches programs: if in the route is not specified any sequence of programs. 
Freedom wrenches sequence: If in the route is specified a sequence of programs. 
 
 
 
 
 
 
 
 
 
 
 
  

 
48 
 
48 PRW mode working with SQnet FTA 
 
 
 
 
 
After the route is created, user has to add tests or tightening programs to the route: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
On the bottom part of route management window, it’s displayed the tree structure with all tests 
belong to location. 
After test is selected (left button of mouse), click on the green arrow to add test to the route or 
click on the red arrow to remove test from the route. When finished, close the...

 
 
   [email protected]     
49  
When the route is sent to the wrench (see next paragraph), user will find all test and programs 
inserted inside Freedom³. 
Note: it’s only possible to send more than one route to the wrench, if user need to divide test or 
programs for area or shift or just organize better the work is possible to create “group” inside the 
route, see below “how to create Group inside a route” 
 
How to create one or more “Groups” inside a route 
 
Once the route is created, it’s...

 
50 
 
50 PRW mode working with SQnet FTA 
 
 
It will appear a new window: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
In the field “Group name” insert the name of the group. 
Note: the “Group name” can be chosen considering how user wants to organize the work, for 
example using shift name (in case Freedom³ is used by different operators in different shifts), or 
area name where the wrench will be used (so it’s possible to create a group for every single work 
area where the wrench will be used), or...