Alarm Lock DL5300 Programming Manual

31 
Function 
Number(s) Function Name Programming  
43/44 Clock Adjust    
52/53/54 Pass Time          (3 sec) †     10 sec †    15 sec †  
60 Set Lockout Attempts   
61 Set Lockout Time     
64/65 Remote Input Momentary          (Enable) †    Disable †   
67 Add Relay/System Features   
69/70 Enter Key Enable †    (Disable) †   
  
+/-    0-55  
 (0) (0) Seconds 
 1-9 Attempts 
(6)  
  1-60 seconds 
(1) (8)  
Default Values are shown in parentheses. 
Check all that apply   
29. Toggle Passage Mode †...

32 
User Number 
(1-2000) User Code  
(3-6 digits)  User Name 
       1 2 3 4  
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
Group  
Association 
  
For a complete list of User...

33 
 Day(s)  
 
   
 
 
Function Number Up to 500 scheduled functions can be programmed (Up to 
only 150 using AL-DTM).  For Day Enter : 
1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday 
5 = Thursday, 6 = Friday, 7 = Saturday, 8 = Monday through 
Friday, 9 = Saturday and Sunday, 0 = All days of the week 
Enter time of day in 24-hour format (00:00- 23:59)  
 
Time  
 
Function Name 
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :...

34 
ACCESS = Entry into a restricted area. 
AUDIT TRAIL = A date/time stamped log of previous 
lock events. 
CLOCK 
•REAL TIME CLOCK = An accurate built-in clock 
that allows date/time stamping of events.  The 
clock can be slowed or speeded up to fine tune 
long term accuracy to within three minutes per 
year. 
•CLOCK SETTINGS = Printout includes date, 
time, weekday, and clock speed. 
•CLOCK SPEED = The clock can be adjusted to 
allow faster/slower speeds and therefore 
increasing clock accuracy. 
CODE...

35 
alarm panel during a predefined schedule.  
Should the Group 1 enter the lock outside of the 
scheduled time, the alarm will not disarm. The 
alarm panel must be armed through other means 
(such as an Alarm Panel Keypad).  The Burglary 
Alarm Panel must be programmed to disarm from 
an Armed State Only and the zone input must be 
programmed for input disarming. 
•GROUP 1 ENABLES GROUP 4 USERS = A Group 
1 USER CODE entry during a predefined 
schedule will allow access to Group 4 Users. 
•GROUP 1 PUTS...

36 
ALARM LOCK SYSTEMS, INC. (ALARM LOCK) 
warrants its products to be free from manufacturing 
defects in materials and workmanship for 24 months 
following the date of manufacture. ALARM LOCK will, 
within said period, at its option, repair or replace any 
product failing to operate correctly without charge to the 
original purchaser or user. 
This warranty shall not apply to any equipment, or any 
part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered,...