AllTrade Kawasaki 192V Cordless Circular Saw 840056 User Manual
Have a look at the manual AllTrade Kawasaki 192V Cordless Circular Saw 840056 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
R RE EM MO OV VI IN NG G / / A AT TT TA AC CH HI IN NG G B BA AT TT TE ER RY Y P PA AC CK K R RE EM MO OV VE E B BA AT TT TE ER RY Y P PA AC CK K: : 1. Press both release buttons on either side of the Cordless Worklight to release the battery pack. 2. Pull battery pack free of Cordless Worklight. A AT TT TA AC CH H B BA AT TT TE ER RY Y P PA AC CK K: : 1. Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Worklight. 2. Press the battery pack into place. Make sure the latches are securely fastened. Do not use the Cordless Worklight if the battery pack is not seated properly. C CH HA AR RG GE ER R B Be ef fo or re e u us si in ng g b ba at tt te er ry y c ch ha ar rg ge er r, , p pl le ea as se e r re ea ad d c ca ar re ef fu ul ll ly y a al ll l i in ns st tr ru uc ct ti io on ns s a an nd d c ca au ut ti io on na ar ry y m ma ar rk ki in ng gs s o on n b ba at tt te er ry y c ch ha ar rg ge er r, , b ba at tt te er ry y p pa ac ck k a an nd d p pr ro od du uc ct t u us si in ng g b ba at tt te er ry y. . T Th he e c ch ha ar rg ge er r w wi il ll l n no ot t a au ut to om ma at ti ic ca al ll ly y t tu ur rn n “ “O OF FF F” ” w wh he en n t th he e b ba at tt te er ry y p pa ac ck k i is s f fu ul ll ly y c ch ha ar rg ge ed d. . The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet. U Us se e o on nl ly y t th he e c ch ha ar rg ge er r w wh hi ic ch h a ac cc co om mp pa an ni ie ed d y yo ou ur r p pr ro od du uc ct t o or r d di ir re ec ct t r re ep pl la ac ce em me en nt t a as s l li is st te ed d i in n t th hi is s m ma an nu ua al l. . Do not substitute any other charger. Use only Alltrade approved chargers with your product. D Do o n no ot t d di is sa as ss se em mb bl le e c ch ha ar rg ge er r. . D Do o n no ot t u us se e c ch ha ar rg ge er r i if f i it t h ha as s b be ee en n d da am ma ag ge ed d, , l le ef ft t o ou ut td do oo or rs s i in n t th he e r ra ai in n, , s sn no ow w, , w we et t o or r d da am mp p e en nv vi ir ro on nm me en nt ts s, , o or r i im mm me er rs se ed d i in n l li iq qu ui id d. . T Th he e b ba at tt te er ry y p pa ac ck k a an nd d c ch ha ar rg ge er r h he ea at t d du ur ri in ng g c ch ha ar rg gi in ng g. . Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack. W Wh he en n t th he e b ba at tt te er ry y p pa ac ck k r re eq qu ui ir re es s r re ec ch ha ar rg gi in ngg, , a a 3 3 h ho ou ur r c ch ha ar rg ge e a al ll lo ow ws s t th he e t to oo ol l t to o o op pe er ra at te e a at t f fu ul ll l p po ow we er r. . A charging indicator light on the charger will illuminate to show that charging is taking place. B BA AT TT TE ER RY Y B Be ef fo or re e u us si in ng g b ba at tt te er ry y p pa ac ck k, , p pl le ea as se e r re ea ad d c ca ar re ef fu ul ll ly y a al ll l i in ns st tr ru uc c- - t ti io on ns s a an nd d c ca au ut ti io on na ar ry ym ma ar rk ki in ng gs s o on n b ba at tt te er ry y p pa ac ck k, , b ba at tt te er ry y c ch ha ar rg g- - e er r a an nd d p pr ro od du uc ct t u us si in ng g b ba at tt te er ry y. . D Do o n no ot t i in nc ci in ne er ra at te e t th he e b ba at tt te er ry y p pa ac ck k e ev ve en n i if f i it t i is s s se ev ve er re el ly y d da am m- - a ag ge ed d o or r i is s c co om mp pl le et te el ly y w wo or rn n o ou ut t. . The battery pack can explode. D Do o n no ot t c ca ar rr ry y b ba at tt te er ry y p pa ac ck ks s i in n a ap pr ro on ns s, , p po oc ck ke et ts s, , o or r t to oo ol l b bo ox xe es s, , p pr ro od du uc ct t k ki it t b bo ox xe es s, , d dr ra aw we er rs s, , e et tc c. . w wi it th h l lo oo os se e m me et ta al l o ob bj je ec ct ts s. . Battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire. T Th he e b ba at tt te er ry y p pa ac ck k i is s N Ni ic ck ke el l- -C Ca ad dm mi iu um m ( (N Ni i- -C Ca ad d) ) a an nd d i is s c co on ns si id de er re ed d t to o b be e a a t to ox xi ic c m ma at te er ri ia al l b by y t th he e E En nv vi ir ro on nm me en nt ta al l P Pr ro ot te ec ct ti io on n A Ag ge en nc cy y. . Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1 1- -8 80 00 0- -8 82 22 2- -8 88 83 37 7 . T Th he e b ba at tt te er ry y i is s n no ot t f fu ul ll ly y c ch ha ar rg ge ed d. . Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3 hours for the battery to be fully charged. A Al lw wa ay ys s s sw wi it tc ch h t to o a a f fr re es sh h b ba at tt te er ry y w wh he en n t to oo ol l p pe er rf fo or rm ma an nc ce e b be eg gi in ns s t to o d di im mi in ni is sh h. . Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life. N Ne ev ve er r o ov ve er r- -d di is sc ch ha ar rg ge e a a b ba at tt te er ry y b by y u us si in ng g t th he e t to oo ol l e ev ve en n a af ft te er r t to oo ol l p pe er rf fo or rm ma an nc ce e h ha as s d de ec cr re ea as se ed d. . Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance. C Ch ha ar rg ge e b ba at tt te er ry y p pa ac ck k a at t a am mb bi ie en nt t t te em mp pe er ra at tu ur re es s b be et tw we ee en n 5 50 0° °F F – – 1 10 04 4° °F F. . S St to or re e t to oo ol l a an nd d b ba at tt te er ry y p pa ac ck k i in n l lo oc ca at ti io on ns s w wh he er re e t te em mp pe er ra at tu ur re es s w wi il ll l n no ot t e ex xc ce ee ed d 1 12 20 0° °F F. . This is important to prevent serious damage to the battery cells. T Th he e b ba at tt te er ry y p pa ac ck k s sh ho ou ul ld d a al lw wa ay ys s b be e r re ec ch ha ar rg ge ed d w wh he en n t th he e C Co or rd dl le es ss s W Wo or rk kl li ig gh ht t b be eg gi in ns s t to o d di im m. . W Wh he en n b ba at tt te er ry y p pa ac ck k i is s n no ot t i in n u us se e, , k ke ee ep p i it t a aw wa ay y f fr ro om m o ot th he er r m me et ta al l o ob bj je ec ct ts s s su uc ch h a as s p pa ap pe er r c cl li ip ps s, , c co oi in ns s, , k ke ey ys s, , n na ai il ls s, , s sc cr re ew ws s o or r o ot th he er r s sm ma al ll l m me et ta al l o ob bj je ec ct ts s t th ha at t c ca an n m ma ak ke e a a c co on nn ne ec ct ti io on n f fr ro om m o on ne e t te er rm mi in na al l t to o a an no ot th he er r. . Shorting the battery terminals together may cause sparks, burns, or fire. 78 RELEASE BUTTON ®
9 A AD DJ JU US ST TI IN NG G T TH HE E W WO OR RK KL LI IG GH HT T B BE EA AM M Hold the handle of the Worklight securely in one hand. With the other hand, swivel the head of the Worklight counter-clockwise until it is at the angle you desire. Swivel the head of the Worklight clockwise to return it to its original position. R RE EP PL LA AC CI IN NG G T TH HE E L LI IG GH HT T B BU UL LB B T Th hi is s W Wo or rk kl li ig gh ht t u us se es s a a K Kr ry yp pt to on n 1 19 9. .2 2V V, , 0 0. .6 6 A A l li ig gh ht t b bu ul lb b. . Use of any other kind of light bulb may cause damage or injury. P Pa ar rt ts s o of f t th hi is s w wo or rk kl li ig gh ht t h he ea at t u up p a al lm mo os st t i im mm me ed di ia at te el ly y w wh he en n i in n u us se e. . To avoid burns, use caution when handling light bulb and metal reflector. Never change a hot light bulb. Bulb must be cool to the touch before attempting to remove or replace it. F Fo or r y yo ou ur r c co on nv ve en ni ie en nc ce e, , a a s sp pa ar re e l li ig gh ht t b bu ul lb b i is s i in nc cl lu ud de ed d i in ns si id de e t th he e u un ni it t. . U Un ns sc cr re ew w t th he e r ri im m a an nd d c ca ar re ef fu ul ll ly y r re em mo ov ve e i it t f fr ro om m t th he e l li ig gh ht t a as ss se em mb bl ly y. . 10 C CH HA AR RG GI IN NG G B BA AT TT TE ER RY Y P PA AC CK K C CH HA AR RG GE E B BA AT TT TE ER RY Y P PA AC CK K: : 1. Make sure the trigger on the Cordless Worklight is in the “ “O OF FF F” ” position and remove the battery pack from the Cordless Worklight. 2. Plug 120V AC Adapter into household outlet and into side of battery charger. Insert battery pack into battery charger. When the battery is placed in the charger, the red LED indicator light will remain on. 3. When fully charged, reattach battery pack onto Cordless Worklight, making certain latches fasten securely. Cordless Worklight will not operate properly if the battery pack is not seated properly.O OP PE ER RA AT TI IN NG G T TH HE E W WO OR RK KL LI IG GH HT T P Pa ar rt ts s o of f t th hi is s W Wo or rk kl li ig gh ht t h he ea at t u up p a al lm mo os st t i im mm me ed di ia at te el ly y w wh he en n i in n u us se e. . To avoid burns, use caution when handling light bulb and metal reflector. Never change a hot light bulb. Bulb must be cool to the touch before attempting to remove or replace it. O OP PE ER RA AT TI IN NG G T TH HE E O ON N / / O OF FF F S SW WI IT TC CH H Press the “ “O ON N/ /O OF FF F” ” switch to turn the worklight “ “O ON N” ” and “ “O OF FF F” ” . UP BATTERY PACK 120V AC ADAPTER LED LIGHT BATTERY CHARGER
A AC CC CE ES SS SO OR RI IE ES S U Us se e o on nl ly y a ac cc ce es ss so or ri ie es s t th ha at t a ar re e r re ec co om mm me en nd de ed d b by y t th he e m ma an nu uf fa ac ct tu ur re er r f fo or r y yo ou ur r m mo od de el l. . Accessories that may be suitable for one tool may become hazardous when used on another tool. A Al lw wa ay ys s a at tt ta ac ch h g gr ro ou un nd de ed d ( (3 3- -p pr ro on ng g) ) e ex xt te en ns si io on n c co or rd ds s t to o g gr ro ou un nd de ed d ( (3 3- -h ho ol le e) ) o ou ut tl le et ts s. . I If f y yo ou u m mu us st t u us se e a an n e ex xt te en ns si io on n c co or rd d, , b be e s su ur re e t th ha at t t th he e g ga au ug ge e i is s l la ar rg ge e e en no ou ug gh h t to o c ca ar rr ry y t th he e a am mo ou un nt t o of f c cu ur rr re en nt t n ne ec ce es ss sa ar ry y f fo or r y yo ou ur r p po ow we er r t to oo ol l. . If not, your tool may experience a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below). R RE EC CO OM MM ME EN ND DE ED D S SI IZ ZE ES S O OF F E EX XT TE EN NS SI IO ON N C CO OR RD DS S 1 12 20 0 V VO OL LT T A AC C 6 60 0 H HZ Z T TO OO OL LS S T TO OO OL L C CU UR RR RE EN NT T R RA AT TI IN NG GC CO ON ND DU UC CT TO OR R S SI IZ ZE E I IN N A A. .W W. .G G AMPERE 10FT. 25FT. 50FT. 100FT. 3-6 18 18 18 186-8 18 18 18 168-10 18 18 18 1410-12 16 16 14 1412-16 14 12 12 -16-20 12 12 12 - S SP PE EC CI IF FI IC CA AT TI IO ON NS S S SP PE EC CI IF FI IC CA AT TI IO ON NS SVoltage 19.2V Light Bulb Type Krypton 19.2V 0.6 ACharger Input 120V 60HzCharging Time Approx. 3 HoursBattery Type Ni-Cad P PR RO OT TE EC CT TI IN NG G T TH HE E E EN NV VI IR RO ON NM ME EN NT T B BA AT TT TE ER RI IE ES S Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1 1- -8 80 00 0- -8 82 22 2- -8 88 83 37 7 . Collected batteries will be recycled or disposed of properly. 1. Remove the battery pack from the Worklight. 2. Hold the top of the Worklight with one hand while twisting the rim in a counter-clockwise direction with the other. Continue turning until the rim comes loose. 3. Remove the bulb by turning it slightly and pulling it out of the bulb fitting. Be careful not to damage the delicate parts inside the case. 4. Insert the new bulb, then carefully put the rim back in place and turn it clockwise to tighten it. M MA AI IN NT TE EN NA AN NC CE E A AN ND D C CL LE EA AN NI IN NG G A Al lw wa ay ys s r re em mo ov ve e t th he e b ba at tt te er ry y p pa ac ck k b be ef fo or re e a at tt te em mp pt ti in ng g c cl le ea an ni in ng g o or r m ma ai in nt te en na an nc ce e. . U U s se e o on nl ly y m mi il ld d s so oa ap p a an nd d a a d da am mp p c cl lo ot th h t to o c cl le ea an n t th he e t to oo ol l. . Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear. A Al lw wa ay ys s c cl le ea an n t th he e b ba at tt te er ry y p pa ac ck k u us si in ng g o on nl ly y a a d dr ry y c cl lo ot th h. . D Do o n no ot t u us se e l li iq qu ui id ds s. . A Al lw wa ay ys s u un np pl lu ug g t th he e c ch ha ar rg ge er r b be ef fo or re e c cl le ea an ni in ng g i it t. . R Re eg gu ul la ar rl ly y c cl le ea an n t th he e v ve en nt ti il la at ti io on n s sl lo ot ts s i in n y yo ou ur r t to oo ol l a an nd d c ch ha ar rg ge er r u us si in ng g o on nl ly y a a s so of ft t b br ru us sh h o or r d dr ry y c cl lo ot th h. . N Ne ev ve er r o op pe en n t th he e W Wo or rk kl li ig ghht t c ca as se e, , b ba at tt te er ry y p pa ac ck k o or r c ch ha ar rg ge er r. . Do not attempt to repair the Worklight, battery pack or charger yourself. Opening any of these parts will void your warranty. U Us se e o on nl ly y a au ut th ho or ri iz ze ed d r re ep pl la ac ce em me en nt t p pa ar rt ts s f fo or r y yo ou ur r t to oo ol l. . Equipment service must be performed only by qualified repair personnel using authorized replacement parts. Service or maintenance by unqualified personnel could result in considerable risk of personal injury. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. 1112 REPLACEMENT BULB
and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever.T TH HE ER RE E A AR RE E N NO O W WA AR RR RA AN NT TI IE ES S W WH HI IC CH H E EX XT TE EN ND D B BE EY YO ON ND D T TH HE E D DE ES SC CR RI IP PT TI IO ON N O ON N T TH HE E F FA AC CE E H HE ER RE EO OF F. . W Wa ar rr ra an nt ty y P Pe er rf fo or rm ma an nc ce e By purchasing the product, purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and/or part is promptly returned to Alltrade’s facility postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair, 1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723) within the applicable warranty period, with a written request by purchaser that Alltrade repair and/or replace the nonconforming item and/or part. We recommend that you keep the original product packaging in the event you need to ship the unit. We suggest the package be insured against loss or in transit damage. When sending your product include your name, address, phone number, dated proof of purchase (or copy), and a statement about the nature of problem. Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date. Parts returned, freight prepaid and insured, to Alltrade’s facility (see above address) will be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if found to be defective and subject to warranty. Alltrade retains the sole discretion to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period. Typically, a defective product that is returned within the first 30 days after the purchase date will be replaced; for items returned after the first 30 days and within the warranty period, covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi- ble for the return shipping charges. Alltrade’s repair and/or replacement of any non- conforming item and/or part thereof shall constitute fulfillment of all obligations to the purchaser. Alltrade shall not be responsible or liable for any expense, including freight charges, or repairs made outside Alltrade’s facility, unless expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commercial loss or consequential damages. 14 O OT TH HE ER R C CO ON NS SU UM ME ER R D DO O- -I IT T- -Y YO OU UR RS SE EL LF F ( (D DI IY Y) ) T TO OO OL LS S Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 2 2 Y YE EA AR R L LI IM MI IT TE ED D H HO OM ME E U US SE E W WA AR RR RA AN NT TY Y E Ex xp pr re es ss s a an nd d E Ex xc cl lu us si iv ve e L Li im mi it te ed d H Ho om me e U Us se e W Wa ar rr ra an nt ty y t to o O Or ri ig gi in na al l R Re et ta ai il l B Bu uy ye er r Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail purchaser of the accompanying KAWASAKI™ portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of purchase. S SP PE EC CI IA AL L W WA AR RR RA AN NT TY Y N NO OT TE E T TO O C CO ON NT TR RA AC CT TO OR RS S A AN ND D C CO OM MM ME ER RC CI IA AL L U US SE ER RS S: : This Kawasaki™ portable power tool is offered as a home use tool and carries a H HO OM ME E U US SE E W WA AR RR RA AN NT TY Y . This tool is made for home use in the execution of projects and repairs in and around the home. Use of the tool for C CO OM MM ME ER RC CI IA AL L P PU UR RP PO OS SE ES S O OR R O ON N A A J JO OB BS SI IT TE E is not covered under this warranty. The date of purchase shall be the date of shipment to the original purchaser, or the date the original purchaser took possession, custody or control of the product, whichever occurred first. This warranty shall be null and void if the product or any component thereof is modified, altered or used for any commercial purpose or on a jobsite. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products 13
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE. L Li im mi it ta at ti io on n O Of f L Li ia ab bi il li it ty y IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER, AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE. L Li im mi it ta at ti io on ns s o on n W Wa ar rr ra an nt ty y D Di is sc cl la ai im me er rs s Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages, so part or all of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If your product is not covered by this warranty, please call our Customer Service Department toll free at 1-800-590-3723 for general repair information and charges. 16 E Ex xc cl lu us si io on ns s This warranty does not cover parts damaged due to normal wear, abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty. This limited warranty does not apply to accessory items such as drill bits, screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding sheets and other related items. DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE, NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY. Alltrade will not be liable for the following: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly, oil or lubricants, and adjustment; maintenance services that are normally required to maintain the product. The use of other than genuine Alltrade Repair Parts will void warranty. W Wa ar rr ra an nt ty y D Di is sc cl la ai im me er rs s EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE. EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE 15
19.2V 2-SPEED BATTERY-OPERATED DRILL INSTRUCTION MANUAL FOR CUSTOMER SERVICE POUR LE SERVICE APRÉS VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR1-800-590-3723 Printed in China 87-1904-60957 KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2006 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA840056 – 19.2V Black Cordless Drill_Rev 8/22/06 THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL NO., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected]. YOUR FEEDBACK IS VITAL TO US. COMPONENT #840056
SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 18 SECTION FIVE 2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22 CONGRATULATIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for, this tool will give you many years of satisfaction. INTENDED USE This tool is intended for consumer use only. Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool. GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools. Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTIONand NOTEstatements of this manual. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. TABLE OF CONTENTS CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION ONE GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS . . 2 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SECTION TWO SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6 SAFETY RULES FOR CORDLESS DRILL/DRIVERS . . . . . . . . . . . . . 6-7 SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SECTION THREE FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12 REMOVING / ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . 11 CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 INSTALLING DRILL BIT INTO KEYLESS CHUCK . . . . . . . . . . . . . . 12-13 OPERATING THE CORDLESS DRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16 VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 13 FORWARD/REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 14 TORQUE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 HIGH / LOW SPEED (GEAR) SHIFTING . . . . . . . . . . . . . . . . . . . . . . 15 SCREWDRIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING MASONRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HINTS FOR OPTIMUM USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 1
DANGERindicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNINGindicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTIONindicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTIONused without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTEprovides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. IMPORTANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. WARNING:Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. WORK AREA Keep your work area clean and well lit.Cluttered work benches and dark work areas may cause accidents or injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately.Damaged cords may create a fire. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery.A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery operated tool only with specifically designatedbattery pack.Use of any other batteries may create risk of fire. 4
When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause sparks, burns or a fire. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using.Many accidents are caused by poorly maintained tools. Use only accessories that are recommended by the manufacturer for your model.Accessories that may be suitable for one tool may create a risk of injury when used on another tool. SERVICE Tool service must be performed only by qualified repair personnel.Service or maintenance by unqualified personnel may result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when perform- ing an operation where the cutting tool may contact hidden wiring.Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. SAFETY RULES FOR CORDLESS DRILL / DRIVERS Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated or may cause injury. Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury. 6 PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication.A moment of inattention while operating power tools may result in serious personal injury. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.Loose clothes, jewelry or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is in the locked or “OFF” position before inserting battery pack. Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch “ON”invites accidents. Remove adjusting keys or wrenches before turning the tool “ON”.A wrench or a key that is left attached to a rotating part of the tool may result in person- al injury. Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enable better control of the tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat, or hearing protection must be used for appropriate conditions.TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform.Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application.The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool if the power switch does not turn it “ON” or “OFF”.A tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect battery pack from tool or place the switch in the locked or “OFF” posi- tion before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons.Tools are dangerous in the hands of untrained users. 5
SYMBOLS IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION V Volts Voltage (Potential)A Amperes CurrentHz Hertz Frequency (Cycles per Second)W Watt PowerKg Kilograms Weight Alternating Current Type of CurrentDirect Current Type of CurrentAlternating or Direct Current Type of CurrentEarthing Terminal Grounding TerminalClass II Construction Denotes Double Insulation min Minutes Times Seconds Time Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, Torque or Position Settings 8 Position yourself to avoid being caught between the tool or side handle and walls or posts.Should the socket or bit become bound in the work, the reac- tion torque of the tool could crush your hand or leg. Check to see that keys and adjusting wrenches are removed from the Cordless Drill before switching the tool “ON”.Keys or wrenches can fly away at high velocity striking you or a bystander. When using the Cordless Drill, always maintain a firm grip on the tool with both hands. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.Contact with a live wire will also make exposed metal parts of the tool live and shock the operator. Keep the handle of the Cordless Drill dry, clean, and free from oil and grease. Do not run the Cordless Drill while carrying it at your side.A spinning socket or bit could become entangled with clothing and injury may result. Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of starting the tool accidentally. Do not use the Cordless Drill if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid. Maintain labels and nameplates on the Cordless Drill.These carry important information. If unreadable or missing, contact Alltrade for a replacement.