Home > Amanda > Communications System > Amanda Work Group 7xx Installation Manual

Amanda Work Group 7xx Installation Manual

Here you can view all the pages of manual Amanda Work Group 7xx Installation Manual. The Amanda manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 41

Chapter 3: Programming Your KSU 31
1Do this for each line to be accessed by Amanda.2A Line Pool must be built and assigned to Amanda. Use a letter from A-O.
Modular ICS (MICS) Settings
MICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
A. Configuration
.    1. Trk/Line Data
.    .    TCs on KSU
.    .    .    TC1 on KSU
.    .    .    TC2 on KSU
.    .    Show line:_1 
            (001
, 002
, 003
, etc.)
.    .    .    Trunk Data
.    .    .    .    Line001
.    .    .    ....

Page 42

32 Installing [email protected]/DOS
1This is the typical DN value for the first port of a 4-port Amanda.2These are the typical DN values associated with Amanda’s middle (second through next-to-last) ports.3This is the typical DN value associated with Amanda’s last port (i.e. notification port).4Do this for each line to be answered by Amanda.
Modular ICS (MICS) Settings (continued)
MICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
.    2. Line Access 
.    .    Show...

Page 43

Chapter 3: Programming Your KSU 33
1DRT to prime calls are  not compatible with Amanda if the lines have names other than the Norstar default 
names. Check with The Amanda Company for more details if you need to set DRT to prime to Y.
2This value must be higher than the number of rings Amanda waits for answer (forward delay) while super-
vising a call transfer.
3This value must be higher than the number of rings Amanda waits for answer (forward delay) while super-
vising a call transfer.
Modular ICS...

Page 44

34 Installing [email protected]/DOS
Modular ICS (MICS) Settings (continued)
MICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
.    5. Miscellaneous
.    .    Backgrnd music
.    .    Direct-dial #
.    .    DISA DN
.    .    Auto DN
.    .    Alarm set
.    .    CAP Assignment
.    .    Link time
.    .    Set relocationN
.    .    Host delay
.    .    Receiver volume
.    .    External code9
.    .    Line pool codes 
           (typically 9, 8, or 7)
.    .    .    Line Pool...

Page 45

Chapter 3: Programming Your KSU 35
1This is the recommended DN value for the first port of a 4-port Amanda.2These are the recommended DN values associated with Amanda’s middle (second through next-to-last) 
ports.
3This is the recommended DN value associated with Amanda’s last port (i.e. notification port).4Be sure to add a mailbox in Amanda for each Amanda port, using this name as the Set Name.
Modular ICS (MICS) Settings (continued)
MICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast...

Page 46

36 Installing [email protected]/DOS
1The next-to-the-last port should NOT forward to the last (notification) port.    2The Amanda Company recommends sending these calls to the Norstar Prime Set (live attendant) in the 
event of a Norstar or Amanda port malfunction.
Modular ICS (MICS) Settings  (continued)
MICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
.    .    .    .    Paging
.    .    .    .    Page zone
.    .    .    .    Aux. Ringer
.    .    .    .    Direct-dial
.    ....

Page 47

Chapter 3: Programming Your KSU 37
The following table is for Compact ICS, both versions R1.0 and R2.0. 
Where these two version differ, the menu item is labeled as R1.0 Only or 
R2.0 Only.
1This is the typical DN value for the first port of a 4-port Amanda.2These are the typical DN values associated with Amanda’s middle (second through next-to-last) ports.3This is the typical DN value associated with Amanda’s last port (i.e. notification port).4Do this for each line to be accessed by Amanda.
Compact ICS...

Page 48

38 Installing [email protected]/DOS
1The Amanda Company recommends sending these calls to the Norstar Prime Set (live attendant) in the 
event of a Norstar or Amanda port malfunction.
2The next-to-the-last port should NOT forward to the last (notification) port.
Compact ICS (CICS) (continued)
CICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
.    .    Capabilities
.    .    .    Fwd no answer
.    .    .    .    Fwd toPrime1PrimePrime
.    .    .    .    Forward delay
.    .    ....

Page 49

Chapter 3: Programming Your KSU 39
1Be sure to add a mailbox in Amanda for each Amanda port, using this name as the Set Name.2Do this for each line to be accessed by Amanda.3Do this for each line to be accessed by Amanda.
Compact ICS (CICS) (continued)
CICS Programming Settings for Amanda
MenuGeneral1st PortMid PortsLast Port
.    .    NameAMANDA11AMANDnnAMANDnn
.    .    User preferences
.    .    Restrictions
.    .    Telco features
.    .    .    CLASS assignmnt
.    .    .    .    Show line:_ 
2
....

Page 50

40 Installing [email protected]/DOS
1This value must be higher than the number of rings Amanda waits for answer (forward delay) while super-
vising a call transfer. 
2DRT to prime calls are  not compatible with Amanda if the lines have names other than the Norstar default 
names. Check with The Amanda Company for more details if you need to set DRT to prime to Y.
3This value must be higher than the number of rings Amanda waits for answer (forward delay) while super-
vising a call transfer.
Compact ICS...
Start reading Amanda Work Group 7xx Installation Manual

Related Manuals for Amanda Work Group 7xx Installation Manual

All Amanda manuals