ATT Passageway For Partner Communications System User Guide

							Installing and Setting Up Passageway Solution
9.Select the Continue button.
The AT&TConnect Setup - System Configuration dialog box appears.
Figure 2-11. AT&TConnect Setup - System Configuration Dialog Box
10.Select the option button of your PARTNER system, and then select the
Continue button.
AT&TConnect verifies the connection between the PassageWay adapter
and the COM port you selected, and then reads your telephone.
If you do not have a PARTNER II Release 3.0 or later system, the
AT&TConnect Setup - Line Labels dialog box appears when
AT&TConnect finishes reading your telephone (see Figure 2-14). In this
case, proceed to step 13.
2-16 
						

							Installing and Setting Up PassageWay Solution
If you have a PARTNER II Release 3.0 or later system, the
AT&TConnect Setup - Caller ID Inspect Feature dialog box appears
when AT&TConnect finishes reading your telephone. If you do not have
a Caller ID Inspect button already programmed on your telephone, the
AT&TConnect Setup - Caller ID Inspect Feature dialog box prompts you
to enter one (Figure 2-12). If you do have a Caller ID Inspect button
already programmed, the AT&TConnect Setup - Caller ID Inspect
Feature dialog box shows where the Caller ID inspect button is
programmed (Figure 2-1 3).
AT&TBuzz requires a Caller ID Inspect button on your phone in order to
provide you with the ability to view Caller ID information for an incoming
call if you are already active on another call.
2-17 
						

							Installing and Setting Up PassageWay Solution
Figure 2-12. AT&TConnect Setup - Caller ID Inspect
Feature Dialog Box When No Caller ID Inspect Button
is Programmed
2-18 
						

							Installing and Setting UP Passageway Solution
Figure 2-13. AT&TConnect Setup - Caller ID Inspect
Feature Dialog Box with Caller ID) Inspect Button
Programmed
11.Perform one of the following steps:
nIf a Caller ID Inspect button is not programmed, and you want to
program one, select the button that you want to program as the
Caller ID Inspect button.
Inspect appears on the label of the button you selected.
Proceed to step 12.
2-19 
						

							nIf a caller ID Inspect button is not programmed, and you do not
want to program one, proceed to step 12.
nIf a Caller ID inspect button is already programmed, proceed to
step 12.
12.Select the Continue button.
The AT&TConnect Setup - Line Labels dialog box appears.
Installing and Setting Up PassageWay Solution
Figure 2-14. AT&TConnect Setup - Line Labels Dialog
Box
AT&TBuzz uses the Line Labels to identify where calls are appearing on
your telephone. You may customize the labels to something that will be
more meaningful to you (for example, the last four digits of the
telephone number of the line assigned to the button or the line number).
2-20 
						

							Installing and Setting Up PassageWay Solution
13.Perform one of the following steps:
— If you want to customize the Line Labels, perform the following
steps:
a.
Select the label that you want to change.
The AT&TConnect Setup - Edit Line Label dialog box
appears.
b.Enter a new label and select the OK button.
c.Proceed to step 14.
— If you do not want to modify the Line Labels, proceed to step 14.
14.Select the Continue button.
The AT&TConnect Setup - Line Label dialog box closes, and the
AT&TConnect Setup dialog box appears.
Figure 2-15. AT&TConnect Setup
Dialog Box
2-21 
						

							Installing and Setting Up PassageWay Solution
This dialog box lists the following information:
n
n
nthe version of your PARTNER system
whether you programmed a Caller ID Inspect button (only if your
system is PARTNER II Release 3.0 or later)
whether or not you customized the line labels
15.
Select the OK button.
The AT&TConnect Setup dialog box closes, and the AT&T PassageWay
window appears, displaying the AT&TBuzz, AT&TCall, AT&TConnect,
AT&TSet, and Log Viewer icons. The AT&TConnect icon also appears
at the bottom of your screen.
2-22 
						

							Installing and Setting Up PassageWay Solution
Figure 2-16. AT&T PassageWay Window
The installation program puts the AT&TConnect icon in the StartUp group (if
the StartUp group already exists). If the StartUp group does not already exist,
PassageWay Solution creates it and places the AT&TConnect icon in it.
If AT&TConnect is in the StartUp group, every time you invoke Windows the
AT&TConnect software is automatically loaded, and the AT&TConnect icon
appears at the bottom of the screen.
If you do not want AT&TConnect to be loaded automatically every time you
invoke Windows, remove the AT&TConnect icon from the StartUp Group
2-23 
						

							Installing and Setting Up PassageWay Solution
window. (See your Microsoft Windows User’s Guide.) However, if you remove
the AT&TConnect icon from the StartUp group window, you must remember to
execute AT&TConnect manually before using other PassageWay applications.
AT&TConnect provides the communication interface between your PC and
your telephone. If AT&TConnect is not running, the other PassageWay
applications on your PC are unable to communicate with your telephone.
Now that the PassageWay software is installed, proceed to Setting Up
AT&TBuzz.
2-24 
						

							Installing and Setting Up PassageWay Solution
Setting Up AT&TBuzz
AT&TBuzz is a software application that enables you to manage incoming calls
(answer, hold, or drop) and view Caller ID (when available) for each incoming
call appearing at your telephone. Unlike AT&TCall and AT&TSet, AT&TBuzz
runs all of the time in the background. When you receive a call, the AT&TBuzz
window appears, notifying you of the call. The AT&TBuzz window displays the
state of all incoming calls that are currently present on your telephone. If you
want AT&TBuzz to be automatically initiated every time that you enter
Windows, add AT&TConnect and AT&TBuzz to your StartUp group.
Before you can start using AT&TBuzz, you must first setup the application.
AT&TBuzz provides several options that enable you to tailor AT&TBuzz to your
needs. Setting up AT&TBuzz consists of the following procedures:
1.Select the Run Mode option that best suits the way you will use
AT&TBuzz.
2.Set the user options.
2-25