Canon network camera VBR13 User Manual
Have a look at the manual Canon network camera VBR13 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting Page 5 191 The settings are saved and the Intelligent Function restarts. Context Menu Right-click on the video display area, Detection Settings (List) and Non-Dete ction Settings (List) to display a menu that allows you to use the following functions. Unavailabl e functions will be grayed out when you right-click. [Copy detection area/line] Copy the detection area/line of the select ed detection setting to the clipboard. [Paste detection area/line] Paste the copied detection area/line from the clipboard to the detection setting being configured. Paste cannot be used with camera tampering detection. Pasting a detection line is possible only when setting pa ssing detection in the copy source and the paste target. [Clear detection area/line] Delete the detection area/line of the sel ected detection setting. If the shape of the area is rectangular, or the area is a camera tampering detection area, the area cannot be deleted. [Copy detection criteria settings] Copy the detection criteria of the select ed detection setting to the clipboard. The detection settings name and display color are not copied. [Paste detection criteria settings] Paste the copied detection criteria from the clipboard to th e detection setting being configured. Pasting is possible only if the source and the target are the same detection type. [Copy event settings] Copy the event settings of the selected detection setting to the clipboard. [Paste event settings] Paste the copied event settings from the clipboard to the detection setting being configured. [Copy non-detection area] Copies a non-detection area that has been set to the clipboard. [Paste non-detection area] Pastes a non-detection area copied to the clipb oard to the non-detection area that is being set. [Clear non-detection area] Deletes the non-detection area that is being set. 1Click [Detection Settings]. 2Select [Reduce effects of lighting change] checkbox. 3Click [Save settings]. Important It takes several seconds for the Intelligent Function to restart. No detection is performed while restarting. Settings in [Reduce effects of lighting change] may not work depending on the operating environment. Repeated sudden changes in brightness may also have the same effect. Perfor m a detection test to check whether settings work correctly.
192 For Auto Tracking, set the detection area for moving objects while checking the video on the computer screen. The camera is controlled so that the detected moving object appears near the center of the video display area. You can also set which operations (such as e-mail notification, recording video, or playing audio from the speaker connected to the camera) are carried out when detection occurs. Setting Auto Tracking Use the following steps to set Auto Tracking. For details on how to adjust presets, please refer to “Registering a Preset” (P. 131). If you select [Specify the initial camera position], the came ra angle will be moved to the selected preset position. The camera angle will also be moved to the selected preset position after Auto Tracking ends. Note You can select presets that meet the following conditions. – Presets configured within the view restrictions. – Presets with pan, tilt and zoom setting values ( not blank) configured in [Preset Registration] (P. 132). [Event] > [Intelligent Function] - Auto Tracking - R13R12 The following settings can be configured here. Display Options Camera Position Settings 1Obtain camera control privileges to set Auto Tracking (P. 67). 2Select [Specify the initial camera position] in [Camera Position Settings] as neces sary, then select a preset. Important It is recommended that you select [Specify the initial camera position] and configure the camera to begin auto tracking from a specified position.
Setting Page 5 193 Use a rectangle to specify the detection area (P. 180). Note The detection area is set to display within a rectangular area by default. It cannot be set to the edge of the video display area. Set the size ratio of moving objects for the entire screen. When the setting values or slider is changed, or the detection area is changed, an indicator representing the object size is displayed for one second in the center of the video display area allowing you to check the size ratio while specifying the setting. When the moving object is det ected, the camera automatically tr acks it for the specified time. When selected, the camera zooms in on the mo ving object and automatically tracks it. 3Configure the detection area in the video display area. 4Configure the size the moving object needed to trigger detection in [Object Size (%)] in the [Tracking Conditions] tab. 5To configure the time to continue auto tracking, select [Set the tracking duration] and set the time in [Tracking Duration (Sec)]. 6To automatically zoom in on the mo ving object while tracking, select [Enable auto zoom during tracking]. Object Size Indicator Detection Area
194 For details on settings, please refer to “Configuring Operations for “Detected” ([Event] Tab)” (P. 197). The settings are saved to the camera. If you keep control privileges, the camera does not automatically track. For the camera to automatically track moving obj ects, it is necessary to release control privileges. Detection Status for Auto Tracking All moving objects detected are shown with contour lines. If a moving object is smaller than [Object Size (%)], its contour lines are white. If the moving object is larger than [Object Size (%)], its contour lines take on the same color as the detection area, indicating that “d etected” mode has been triggered. In “detected” mode, auto tracking starts and a polygon frame appears on the target object. The camera will pan, tilt or zoom during auto tracking so the target object always appears at the center of the screen. When [Enable auto zoom during tracking] is selected, the camera zooms in on the target and auto tracks. 7In the [Event] tab, configure the operations to be performed when “detected” mode is triggered. 8Click [Apply]. 9In the message box displayed, click [OK]. Contour Lines of Detected Moving Object Detection Area
Setting Page 5 195 Auto tracking prioritizes tracking the first detected moving object. While auto tracking, other moving objects will not be detected even if they sati sfy [Tracking Start Conditions]. Note The detection status of auto tracking can also be checked in t he [Event and Input/Output] menu of the Camera Viewer (P. 85). Auto Tracking Termination Auto tracking will be terminated in the following cases. The Camera Viewer, etc. obtained camera control privileges or the video is displayed on the Setting Page. The camera moved to a preset position due to the triggering of a volume detection event or an external input device. Capture of a panorama image has started. You executed [Maintenance] > [General] > [Tool] > [Refresh Drive System]. The configured auto [Tracking Duration] time has elapsed. Tracking cannot continue because sight of the moving object was lost (examples: movement of target object was lost, target object is lost in shadow of anot her object, target object falls below the sizes possible for tracking, target object moves outside the possible tracking area). The [Intelligent Function] has restarted. When auto tracking is terminated, a tracking OFF event is triggered and the camera returns to the initial camera position (when [Specify the initial camera position] has been selected). If camera control privileges were revoked, the camera will move after camera control privileges are released. Auto tracking detection resumes after the camera moves back to the original position. Disabling Auto Tracking You can disable Auto Tracking by selecting [Video Detection] (P. 173) in [Operation Mode] for the Intelligent Function. Important When setting the Auto Tracking Function, it is recommended that you test the auto detection, to confirm that object will conti nue to be tracked. Moving objects are not individually recog nized during auto tracking. Thus when two objects pass each other, or there are multiple moving objects, proper tracking of the object may not be possible. If there are multiple moving objects, la rge objects closest to the center of the screen are prioritized and will continue to be tracked. The privacy mask areas are also part of the auto tracking detection area. The camera will not track the subject while video is being di splayed on the Setting Page, or while camera control privileges a re obtained using the camera viewer, etc. To allow automatic tracking with the camera, you must release the camera control privileges. While auto tracking, preset tours will not start. Auto tracking beyond view re strictions is not possible. Auto Tracking Target Frame R13 R13
196 Displaying Settings for Detection Areas and Detection Results (Display Options) Select whether to display the detection area and detection results in the video display area. You can select [Display]/[Do not display] for both [Detection Area] and [Detection Results]. [Detection Area] can only be displayed when you have obtained camera control privileges.
Setting Page 5 197 This explains functions common to both video detection and auto tracking. Configuring Operations for “Detected” ([Event] Tab) Set operations to be performed upon detection of changes in a subject. (1) Specify Operation Timing (Multiple Selections Possible) [ON Event Operation] When selected, the operations set in (2) are performed when the mode becomes “detected”. [OFF Event Operation] When selected, the operations set in (2) are performed when “detected” mode ends. [Detected mode Operation] When selected, the operations set in (2) are performed while “detected” mode is active. [Action During Auto Tracking] When selected, the operations set in (2) are performe d while the moving object is automatically tracked. (2) Specify Event Operation (Multiple Selections Possible) [E-mail Notification] When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the Setting Page must be set in advance (P. 160). [Video Record] When selected, video recording begins according to the timing specified in (1). [Video Record] > [Upload] (P. 156) or [Memory Card] > [Video Record Setting] (P. 215) in the Setting Page must be set in advance. (3) Specify Audio Playback Timing [Audio Playback at ON Event] When selected, the sound clip specified in (4) is played back when the mode becomes “detected”. [Audio Playback at OFF Event] When selected, the sound clip specified in (4 ) is played back when “detected” mode ends. (4) Sound Clip Settings [Event] > [Intelligent Function] - Shared Operations - (1) (3) (4) (5) (2)(1) (3) (4) (5) (2) Video Detection Auto Tracking R13R12 R13R12 R13M50H652H651 R13M50H652H651
198 [Sound Clip Name] Select the sound clip to be played back. You must register the sound clip with Sound Clip Upload 1 to 3 in [Video and Audio] > [Audio] (P. 148) on the Setting Page in advance. [Volume] Set the volume for the sound clip. (5) External Device Output Operations [External Device Output for ON Event] Select this to start or pause output to an external device when the mode becomes “detected”, and to select the output destination (output 1 or 2) and operation (active or inactive). [External Device Output for OFF Event] Select this to start or pause output to an external device when “detected” mode ends, and to select the output destination (output 1 or 2) and operation (active or inactive). Restarting Intelligent Function If the background video has changed while you were specifying settings or detection results are not as specified, restart the Intelligent Function. R13M50H652H651 1If you have not yet obtained the camera control privileges , click the [Obtain/Release Camera Control Privileges] button and obtain the control privileges. 2Click [Restart intelligent function]. Important It takes several tens of seconds for the Intelligent Function to restart. No detection is performed while restarting.
Setting Page 5 199 When events trigger the switching of Day/Night Mode, presets registered in advance can be executed, such as changing the camera angle or video quality settings. Day/Night Mode Switching [Preset when Switching to Day Mode] Executes the preset when switched to Day Mode. [Preset when Switching to Night Mode] Executes the preset when switched to Night Mode. Note It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131). You can set the timing for event-triggered Day/Night Mode switchi ng in [Switch Day/Night] in [External Device Input] (P. 162) or [Timer] (P. 167). [Event] > [Switch Day/Night] Executing Presets When Switching Day/Night Mode Important When the user has camera control privileges, the presets for [P reset when Switching to Day mode] and [Preset when Switching to Night Mode] will not run. The following settings can be configured here. Switch Day/Night
200 By linking two types of events, a single event is triggered. Select AND/OR for the event linking method. You can set the operations to perform, such as recording video or sending e-mail notifications, when a linked event is triggered. Note You can check the linked event status on the [Event and Input/Output] menu of the Camera Viewer (P. 85). Linked Event 1 to 4 You can register up to four linked events. You can link five types of events: [Volume Detection], [Scream Detection], [External Device Input], [Timer] and [Intelligent Function]. [Linked Event] Select whether to use a linked event. [Event Linking Method] Select the event linking conditions. [AND]: A new linked event is triggered if both event types selected with [Event 1] and [Event 2] are triggered. Set [Event Order] and [Event Gap] for this. [OR]: A new linked event is triggered if ei ther event type selected with [Event 1] and [Event 2] is triggered. [Event Order] You can select the order two events must be trigge red when [Event Linking Method] is set to [AND]. If set to [None], the order will not be considered. [Event Gap (seconds)] Enter the interval between two events that must be tr iggered when [Event Linking Method] is set to [AND]. A new linked event is triggered if the second event triggers wi thin the specified interval after the first event was triggered. Event 1, 2 Specify the two events to be linked. The settings are the same for both. [Event Type] Select the event type for linking. [Volume Detection]/[Scream Detection] [Event] > [Linked Event] Using Event Combinations R13M50H652H651 The following settings can be configured here. Linked Event 1 to 4 Event 1, 2