Canon network camera VBR13 VE User Manual

							Setting Page
5
121
[Light Source]
If you selected [Compensate for light source], select the light source.
[Fluorescent]
Select this option to capture video under  fluorescent, LED, sodium or mercury lighting.
[Halogen Lamp]
Select this option to capture video  under halogen or incandescent lighting.
[Infrared Light (740nm)]
Select this option to capture video under  infrared (740 nm wavelength) illumination.
[Infrared Light (850nm)]
Select this option to capture video under  infrared (850 nm wavelength) illumination.
[Infrared Light (940nm)]
Select this option to capture video under  infrared (940 nm wavelength) illumination.
Registering a Focus Position
If you selected [Move to registered focus position] for [D ay/Night Mode Focus Control], register a focus position.
[Registered] is displayed for [Day Mode Focus Position].
The settings are saved to the camera.
Note
 If you select an item other than [Move to registered focus posi tion] without first clicking [Apply], the focus position returns to 
[Unregistered].
 Click [Clear] to set the focus position ag ain. The focus position setting is discarded and the setting saved in the camera is 
restored.
 See the page (P. 114) for the focus ranges when using Day/Night Mode settings.
Camera Control
Set the camera focus adjustment and day/night capture mode when controlling day/night mode focus.
[One-shot AF]
Use when [Move to registered focus position] is selected in [D ay/Night Mode Focus Control]. When you click [Exec], it will 
focus once using autofocus and then switch to manual mode.
[Adjust Focus]
Use when [Move to registered focus position] is selected in  [Day/Night Mode Focus Control]. Click [Far] and [Near] to 
adjust focus.
[Day/Night]
Set a capture mode suited to the brightness of the camera installation environment.
[Auto]
The camera automatically determines ambient brig htness and switches to Day Mode or Night Mode.
H652H651
1In [Camera Control], select [Day Mode] for [Day/Night].
2Use [One-shot AF] or [Adjust Focus] in [Camera Control]  while viewing the video display area to adjust the camera 
to a suitable focus position under the lighting conditions of day mode.
3Click [Register] for [Day  Mode Focus Position].
4In [Camera Control], change [Day/Night] to [Night Mode].
5Repeat steps 2 and 3 to register the focus po sition under the Night Mode lighting conditions.
6Click [Apply]. 
						

							122
[Day Mode]
Captures normal color video.
[Night Mode]
Removes the infrared filter to increase sensitivity. Video turns to monochrome. 
						

							Setting Page
5
123
You can create a panorama image that captures the entire area that can be captured by the camera.
Created panorama images are displayed in t he Viewer and part of the Setting Page.
Creating a Panorama Image
A panorama image can be used in the Viewer and for a privac y mask by clicking [Apply] to save it to the camera after 
capturing.
Note
 While a panorama image is being captured, the Image Stabilizer is  temporarily disabled.
 The following users will be disconnect ed while creating a panorama image.
– All users except for administrators
– Users not connected via RTP
 When a small value is entered for [Maximum Frame Rate: Video Transmissi on] (P. 105) in [Video] > [JPEG], panorama capture is sl owed 
down.
Set the range for panorama creation. This enables the panorama creation time to be reduced.
[Specify the panorama creation area]
If you select [Specified], the panorama image is created wi thin a set area that can be captured by the camera. If 
you select [Not specified], the panorama image is crea ted within the entire area that can be captured by the 
camera.
If you selected [Not specified], proceed to step 3.
[Camera] > [Panorama]
Creating a Panorama Image
Important
 If you change the privacy mask settings in  [Privacy Mask], it is recommended that you create the panorama image again to reflect the 
new privacy mask settings in the panorama image.
 If you have changed the camera installation met hod settings, recapture the panorama image.
R13R12M50
The following settings can be configured here.
 Panorama Creation Area
 Panorama Screen
 Capture Settings
1Set [Panorama Creation Area] 
						

							124
Operate the camera angle to get the positioning value in the video display area, and specify the panorama 
creation range.
[Upper Limit]/[Lower Limit ]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left  limit, and right limit to set in the video display area.
Click [Get value] in each position to reflect the values to the panorama creation range frame.
Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limi t]/[Right Limit] to move the preview frame to the upper 
limit, lower limit, left limit, and righ t limit of the current panorama creation ra nge frame and display it in the video 
display area.
Two types of frames are displayed for panorama images.
(1) Panorama creation area frame (red frame) Indicates the capture area of the p anorama image. You can also drag the panorama creation area frame to 
set the capture range for the panorama image.
Note
If the preview frame is positioned outside the panorama creation area frame you have ch anged, the camera position is 
moved inside the panorama creation area frame.
(2) Preview frame (blue frame)
Indicates the current position disp layed in the video display area.
For details on the settings, please re fer to “Capture Settings” (P. 126).
[Capture Settings] are applied when pa norama capture is started, and the previous settings are restored after 
panorama capture is complete.
2Set the panorama creation area using the video display area.
3Set [Capture Settings] as necessary.
4In [Start], click [Exec].
(2) (1) 
						

							Setting Page
5
125
Capturing starts, and the panorama image is created.
Click [Cancel] to cancel capturing.
To recapture part of the image:
A lattice frame is displayed on  the created panorama image.
Right-click with the mouse pointer over the area to recapt ure and select [Recapture] to recapture that area only.
To capture the entir e panorama image again:
Click [Exec] of [Start] again.
The created image is not yet saved in the camera.
The panorama image is saved in the came ra and reflected in the other settings.
Deleting a Panorama Image from the Camera
You can delete a panorama image saved in the camera.
The displayed panorama image is cleared.
The confirmation message is displayed.
The panorama image saved in the camera is deleted.
Saving the Panorama Image as an Im age File/Opening the Image File
The captured panorama image can be saved as an image fi le and image files can be opened as panorama images.
Only image files in the JPEG format can be used.
Saving the Panorama Image as an Image File
5In [Finish], click [Exec].
6Click [Apply].
1Click [Exec] of [Delete].
2Click [Apply].
3Click [OK].
1After creating the panorama image, click [Exec] in [Save to file].
2In the displayed dialog box, select the folder to save the file in, and enter the file name.
3Click [Save]. 
						

							126
The image file is saved in the specified location.
Opening the Image File
The panorama image is displayed.
Capture Settings
These settings will be applied at the panorama image capture start time and will revert back to their previous settings once 
capture is completed.
[Exposure Lock]
The exposure for the selected position will be au tomatically adjusted and locked during capture.
[White Balance Lock]
The white balance for the selected position will be  automatically adjusted and locked during capture.
[Focus Lock]
The focus for the selected position will be automatically  adjusted and locked for the entire scene during capture.
1In [Load from file], click [Exec].
2In the displayed dialog box, select the image file to use and click [Open]. 
						

							Setting Page
5
127
Set the range that the camera can capture.
You can use this, for example, to limit zoom or the field of view to a certain range when publishing live video.
Scope of View Restriction Settings
Restrictions set by the view restriction function are applied in the following cases.
 When the Camera Viewer is accessed with au thorized user or guest user privileges.
 When accessed via RM-Lite.
 For presets or functions that move to preset positions.
Note
Even when view restrictions are set, an area outside the view re striction may still be displayed momentarily when the camera is 
controlled near the boundary of the view restriction.
[Camera] > [Restrict View]
Setting View Restriction
R13R12M50
The following settings can be configured here.
 Restrict View
View restriction
Recording outside the view restriction 
is not possible. 
						

							128
Configuring View Restrictions
Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer.
Note
To delete view restriction settings, select [Disable], and click [Apply].
Operate the camera angle in the video display area to ge t the positioning value, and specify the restrict view 
area.
[Upper Limit]/[Lower Limit ]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left  limit, and right limit to set in the video display area.
Click [Get value] in each po sition to reflect the values to the pan/tilt preview frame.
Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limi t]/[Right Limit] to move the preview frame to the upper 
limit, lower limit, left limit, and right  limit of the current pan/tilt preview frame, respective ly, and display it in the 
video display area.
Note
In the following cases,   (warning icon)  will be displayed with a message stating that the restrict view area cannot be 
configured, and you will become unable to set view restrictions.
 For [Left Limit]/[Right Limit]: If  [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to [Enable]
 For [Upper Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to  [Enable], and [Camera] > [Installation 
Conditions] > [Image Flip] (P. 111) is also set to [Enable]
 For [Lower Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is  set to [Enable], and [Camera] > [Installation 
Conditions] > [Image Flip] (P. 111) is set to [Disable]
To set the upper limit, lower limit, left limit, and right limit, se t [Camera] > [Camera] > [Camera Control] > [Auto Flip] (P. 1 09) to 
[Disable].
[Telephoto]/[Wide-angle]
Operate the camera angle to the wide-angle/tel ephoto limit to set in the video display area.
Click [Get value] in each position to reflect the values  to the wide-angle preview frame/telephoto preview frame.
Click [Preview] in [Telephoto]/[Wide-angle] to move the  preview frame to the telephoto/wide-angle limit of the 
current wide-angle preview frame/telephoto previe w frame and display it in the video display area.
You can also set the telephoto/wide-angle limit range by directly moving the op eration knob on the zoom slider up 
and down. This also moves the preview frame to the telephoto/wide-angle limit of the current wide-angle preview 
Important
 If you have changed how the camera is installed,  reconfigure the view restriction settings.
 Check view restrictions again if you cha nge the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Pa ge.
 When [Camera] > [Camera] > [Camera Control] > [Digital Zoom]  or [Image Stabilizer] are changed in the setting page, check the view 
restriction settings again.
1Select [Enable] in [View Restrictions].
2Use the video display area to co nfigure the view restrictions.
R12R13 
						

							Setting Page
5
129
frame/telephoto preview frame and displays it in the video display area.
If you dragged the telephoto knob to th e upper limit and the wide-angle knob to the lower limit, the view restriction 
is disabled for each edge (t here is no restriction).
Four types of frames are displayed for panorama images.
Drag these frames on the panorama  screen to set the restrict view area.
(1) Pan/Tilt Preview Frame (Red Frame) Displays the vertical and horizontal range the camera can move. You can directly change the restrict view 
area by dragging the pan/tilt preview frame.
If you dragged the pan/tilt preview  frame to the outer frame of the pano rama area, the view restriction is 
disabled for each edge (there is no restriction).
Note
If [Camera] > [Camera Control] > [Auto Flip] (P. 109) is set to  [Enable], sides of the pan/tilt preview frame that cannot be 
configured become gray and cannot be changed. For informat ion on the relationship between Auto Flip and configuring 
the restricted view area, please refer to “Note” on P. 128.
(2) Wide-Angle Preview Frame (Green Frame)
Indicates the maximum wide-angle view possible within  the pan/tilt preview frame. You can directly change 
the position of the frame by dragging the telephoto pr eview frame, but the aspect ratio cannot be changed.
(3) Telephoto Preview Frame (Yellow Frame) Indicates the maximum telephoto view possible within the wide-angle preview frame. You can directly 
change the position of the frame by dragging the tele photo preview frame, but the aspect ratio cannot be 
changed.
(4) Preview Frame (Blue Frame) Indicates the current position disp layed in the video display area.
Note
 If the preview frame (blue frame) is positioned outside th e pan/tilt preview frame (red frame) you have changed, the 
camera position is moved inside the restricted view.
 If you change the position of the wide-angle/telephoto preview frame, the wide-angle/telephoto end of the preview  frame is also changed.
The settings are saved to the camera.
3Click [Apply].
View Restriction Operation Knob (Telephoto)
View Restriction Operation Knob (Wide-angle)
(1)
(2)
(3)
(4)
M50R12R13
(1)
(2)
(3)
(4)
R12R13 
						

							130
Note
 The panorama screen may be slightly different from the actual image. After you have configured view restrictions, be sure to use 
the Camera Viewer to confirm they have been reflected correctly.  View restrictions are not applied to the video display area of the 
restrict view setting.
 The controllable range and range that can be captured are as follows.
 The pan and tilt ranges vary depending on the zoom ratio (view angle).
 If the view restriction will be exceeded as a result of zooming  toward wide-angle, the camera will first pan and tilt to a position 
where the maximum wide-angle zoom will be  within the viewing restriction area. Wide-angle zoom control will then be enabled 
within the view restriction area.
 Narrowing the view restriction  may also reduce the zoom range.
Tilt Control Range
Pan Control Range
Maximum Horizontal Capture Range
Maximum Wide-angle Viewing Angle
Maximum Vertical Capture Range
Setting view restrictions 
automatically restricts 
the camera operating 
angle. When using wide-angle, the camera 
operating angle would allow capture outside 
the view restrictions if the angle remained the 
same. Therefore, it is narrowed automatically.
Restricted view angle
Camera operating angle
Captured video range
Camera
Zoom 
out
Captured video
Restricted view angle
Zoom out
First, the center of the 
maximum wide-angle 
zoom is panned and 
tilted.
After panning and 
tilting, wide-angle 
zoom control is 
enabled within the 
view restriction.