Canon printer imageCLASS MF6590 User Manual

							
Before Using the Machine
1-16

5 Press [] or [] to select the desired interval, then press [OK].
You can set the interval from 1 to 9 minutes (in one-minute increments).
You can also enter values using the numeric keys.
6 Press [Stop] to return to the standby mode. 
						

							
1-17
Before Using the Machine

Setting the Daylight Saving Time
In some countries or areas, time is advanced throughout the summer season. This is called 
“Daylight Saving Time.” The default setting is .
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK].
4 Press [] or [] to select , then press [OK].
5 Press [] or [] to select , then press [OK]. 
						

							
Before Using the Machine
1-18

6 Press [] or [] to select , then press [OK].
7 Press [] or [] to select the month, then press [OK].
8 Press [] or [] to select , then press [OK].
9 Press [] or [] to select the week, then press [OK]. 
						

							
1-19
Before Using the Machine

10 Press [] or [] to select , then press [OK].
11 Press [] or [] to select the day, then press [OK].
12 Press [] or [] to select , then press [OK].
13 Press [] or [] to select , then press [OK]. 
						

							
Before Using the Machine
1-20

14 Press [] or [] to select the month, then press [OK].
15 Press [] or [] to select , then press [OK].
16 Press [] or [] to select the week, then press [OK].
17 Press [] or [] to select , then press [OK].
18 Press [] or [] to select the day, then press [OK].
19 Press [Stop] to return to the standby mode.  
						

							
Document and Paper

2
Document and 
Paper
Document Requirements ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙2-2
Scanning Area  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙2-3
Loading Documents  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙2-4
On the Platen Glass  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙2-4
In the ADF  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙2-6
Paper Requirements  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙2-8
Printable Area  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙2-10
Loading Paper  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙2-11
In the Multi-Purpose Tray (e.g., Envelopes)  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙2-11
Setting Paper Type and Size  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙2-13
For the Paper Cassette  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙2-13
For the Multi-Purpose Tray  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙2-17 
						

							
Document and Paper
2-2

Document Requirements
Platen GlassADF
TypePlain paper
Thick documents
Photographs
Small documents (e.g., index cards)
Special types of paper (e.g., tracing 
paper*1, transparencies*1, etc.)
Books (Height: max. 3/4" (20 mm))
–
–
–
–
–
–
Plain paper (Multi-page documents of 
the same size, thickness and weight or 
one page documents.)
Size (W x L)Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Min. 5 1/2" x 5"
(Min. 139.7 x 128 mm)
WeightMax. 4.4 lb (2 kg)13 to 34 lb bond (50 to 128 g/m2)
(one-sided documents)
13 to 28 lb bond (50 to 105 g/m2)
(two-sided documents)
Quantity1 sheetMax. 50 sheets*2
(Max. 25 sheets for LGL documents)
*1 When copying transparent documents such as tracing paper or transparenci\
es, use a piece of plain white 
paper to cover the document after placing it face-down on the platen glass.
*2  21 lb bond (80 g/m2) paper
Do not place the document on the platen glass or in the ADF until the glue, ink or 
correction fluid on the document is completely dry.
To prevent document jams in the ADF, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Documents with staples or paper clips attached
Paper printed with a thermal transfer printer
Transparencies
●
●
–
–
–
–
–
–
–
–
– 
						

							
2-3
Document and Paper

Scanning Area
Make sure your document's text and graphics fall within the shaded area in the 
following diagram. Note that the margin widths listed are approximate and there may 
be slight variations in actual use. 
						

							
Document and Paper
2-4

Loading Documents
On the Platen Glass
1 Lift up the ADF.
2 Place your document face down. 
						

							
2-5
Document and Paper

3 Align the document with the appropriate paper size marks.
If your document does not match any of the paper size marks, align the center of your document with 
the arrow mark.
4 Gently close the ADF.
The document is ready for scanning.
When closing the ADF, be careful not to get your fingers caught, as this may result in personal injury.
Do not press down the ADF forcefully, as this may damage the platen glass and cause personal injury.
Remove the document from the platen glass when scanning is complete.
–
–