Home > Canon > Printer > Canon printer PIXMA MG2922 User Manual

Canon printer PIXMA MG2922 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG2922 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 735
    							3.Search...
    The  Search  screen is displayed to select an access point to connect to.
    Search Screen
    Note
    •
    When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connect
    the printer and the computer with a USB cable temporarily to change the settings.
    4.
    Encryption Method:
    Select the encryption method used over the wireless LAN.
    Do not use Select to disable encryption.
    Use WEP Transmission is encrypted using a WEP key you specified.
    If a WEP key has not been set, the  WEP Details screen is displayed automatically. To change WEP
    settings set before, click  Configuration... to display the screen.
    Changing the WEP Detailed Settings
    Use WPA/WPA2 Transmission is encrypted using a WPA/WPA2 key you specified.
    The security has been strengthened more than WEP.
    If a WPA/WPA2 key has not been set, the  Authentication Type Confirmation screen is displayed
    automatically. To change WPA/WPA2 settings set before, click  Configuration... to display the
    WPA/WPA2 Details  screen.
    Changing the WPA/WPA2 Detailed Settings
    5.
    Configuration...
    The detailed settings screen is displayed. The WEP or the WPA/WPA2 key selected in  Encryption
    Method:  can be confirmed and changed.
    For details on WEP setting:
    Changing the WEP Detailed Settings
    For details on WPA/WPA2 setting:
    Changing the WPA/WPA2 Detailed Settings
    6.
    TCP/IP Setup:
    Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
    environment.
    Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
    functionality must be enabled on your wireless LAN router or access point.
    Use next IP address Select this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.
    211 
    						
    							Search Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    The access points detected are listed.
    1.
    Detected Access Points: The signal strength from the access point, encryption type, name of access point, and the radio channelcan be confirmed.
    Important
    •
    If you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.
    Note
    •
    Signal strength is displayed as follows.
    : Good
    : Fair
    : Poor
    •
    Type of encryption is displayed as follows.
    Blank: No encryption
    WEP : WEP is set
    WPA/WPA2 : WPA/WPA2 is set
    2.
    Update
    Click to update the list of access points when your target access point is not detected.If the target access point is set to the stealth mode, click  Cancel to return to the previous screen and
    enter the access point's SSID in  SSID: on the  Wireless LAN  sheet.
    Wireless LAN Sheet
    Note
    •
    When detecting your target access point, make sure that the access point is turned on.
    212 
    						
    							3.SetClick to set the access point's SSID in  SSID: on the  Wireless LAN  sheet.
    Note
    •
    The WEP Details  screen or the  WPA/WPA2 Details  screen appears if the selected access point
    is encrypted. In this case, configure the details to use the same encryption settings set to the access point.
    •
    Access points that cannot be used by this machine (including those configured to use different
    encryption methods) are displayed grayed out and cannot be configured.
    213 
    						
    							WEP Details Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Specify the printer WEP settings.
    Note
    •
    When changing the password (WEP key) of the printer, the same change must be made to the
    password (WEP key) of the access point.
    1.
    WEP Key:
    Enter the same key as the one set to the access point.
    The number of characters and character type that can be entered differ depending on the combination of the key length and key format.
     Key Length64bit128bitKey FormatASCII5 characters13 charactersHexadecimal ( Hex
    )10 digits26 digits2.
    Key Length:
    Select either  64bit or 128bit .
    3.
    Key Format:
    Select either  ASCII or Hex .
    4.
    Key ID:
    Select the Key ID (index) set to the access point.
    5.
    Authentication:
    Select the authentication method to authenticate the printer's access to the access point.
    Select  Auto or Open System  or Shared Key .
    214 
    						
    							WPA/WPA2 Details Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Specify the printer WPA/WPA2 settings.
    The value displayed on the screen differs depending on the present settings.
    1.
    Authentication Type:
    Displays the type of authentication used for client authentication. This machine supports the PSK authentication method.
    2.
    Dynamic Encryption Type:
    Displays the dynamic encryption method.
    3.
    Change Settings... Displays the  Authentication Type Confirmation  screen.
    Authentication Type Confirmation Screen
    215 
    						
    							Authentication Type Confirmation Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Type of authentication used for client authentication is displayed.
    1.
    Authentication Type Type of authentication used for client authentication is displayed.PSK This machine supports the  PSK authentication method.
    This authentication type  PSK uses a passphrase.
    216 
    						
    							PSK:Passphrase and Dynamic Encryption Setup Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Enter the passphrase and select the dynamic encryption method.
    1.
    Passphrase:
    Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
    characters or a 64-digit hexadecimal value.
    If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.
    2.
    Dynamic Encryption Type
    The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
    encryption) automatically.
    217 
    						
    							Setup Information Confirmation Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Displays the settings used for client authentication.
    Confirm the settings and click  Finish.
    218 
    						
    							Wired LAN Sheet
    Note
    •
    This screen is not available depending on the printer you are using.
    Allows you to set the printer with wired LAN connection.
    To display the  Wired LAN sheet, click the  Wired LAN tab on the Configuration  screen.
    1.
    TCP/IP Setup:
    Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
    environment.
    Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
    functionality must be enabled on your router.
    Use next IP address Select this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.
    219 
    						
    							Admin Password SheetSet a password for the printer to allow specific people to perform setup and configurations operation.
    To display the  Admin Password  sheet, click the Admin Password  tab on the Configuration  screen.1.
    Use admin password
    Set an administrator password with privileges to set up and change detailed options. To use this feature,
    select this check box and enter a password.
    2.
    Password:
    Enter the password to set.
    3.
    Password Confirmation:
    Enter the password again for confirmation.
    Important
    •
    If you forget the administrator password you specified, initialize the printer to revert the password to the default setting.
    220 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG2922 User Manual