Christie Projector Roadie HD+35K User Manual

Roadie HD+35K User ManualB-1020-100340-02  Rev. 1  (01-2010)
Appendix B: Menu Tree
B.1 OnScreen Menu Tree
Provides a graphical representation of the software menu structure for the Roadie HD+35K. This allows you to 
quickly locate and navigate to a specific menu, and associated options/secondary menus. 

Appendix B - Menu Tree
Appendix B - Menu TreeB-3
020-100340-02 Rev.1 (01-2010)
Main Menu
1. Size & Position
2. Image Settings
3, Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP and Switching 
8. Test Pattern
Size & Position
1. Resize Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. H-Position
7. V-Position
8. Reserved
9. Reserved
0. Advanced Size & Position
Advanced Size & Position
Active Input Window
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play...

Appendix B - Menu Tree
B-4Appendix B - Menu Tree
020-100340-02 Rev.1 (01-2010)
Main Menu
1. Size and Position
2. Image Settings
3, Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP Switching
8. Test Pattern
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service
Option 1 Card: Dual SD/HD-SDI
Option 2 Card
Menu Preferences
1. Large Menu Font
2. Menu Location
3....

Appendix B - Menu Tree
Appendix B - Menu TreeB-5
020-100340-02 Rev.1 (01-2010)
Main Menu
1. Size and Position
2. Image Settings
3, Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP Switching
8. Language
9. Test PatternConfiguration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service
Option 1 Card: Dual SD/   
HD-SDI
Option 2 Card
Main Menu continued… pg. B-5
Color...

Appendix B - Menu Tree
B-6Appendix B - Menu Tree
020-100340-02 Rev.1 (01-2010)
Brightness Uniformity
1. Brightness Uniformity Enable
2. Test Pattern
3. Left Uniformity
4. Right Uniformity 
5. Top Uniformity
6. Bottom Uniformity
7. White Uniformity
8. Color Adjustments by X,Y
9. Color Saturation
0. Lamp
Reserved
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service...

Roadie HD+35K User ManualC-1020-100340-02 Rev. 1 (01-2010)
Appendix C:  System Integration
C.1 Introduction
The GPIO connector located on the side input panel provides a flexible method of interfacing a wide range of 
external I/O devices to the projector, usually so that an event on one device automatically triggers an event on 
the other. There are 7 GIO pins available on the 9pin D-Sub GPIO connector, which are configurable via RS-
232 commands. The other two pins are reserved for ground and power....

C-2Roadie HD+35K User Manual020-100340-02 Rev. 1 (01-2010)
Appendix C: System Integration
Example 1. 
Turn room lighting on when the projector is turned OFF. (Assumes a control/automation unit is configured to 
turn the lights on when pin 2 of its input goes hi(12-2009)gh.)
C.1.2 Query Command
C.1.3 Real Time Event
Use the serial command RTE to specify an action that is initiated at a particular time or based on an external 
stimulus.
For General Purpose IO “G”
Example 2. 
Projector powers up when a...

Roadie HD+35K User ManualD-1020-100340-02 Rev. 1 (01-2010)
Appendix D:  Optional Input Modules
The following optional input modules are currently available, and can be installed in either option slot in the 
projector (
INPUT 5 or INPUT 6). Contact your dealer for a complete and up-to-date listing.
NOTE: Any audio connectors shown are non-functional in this projector.
D.1 DVI Input Module
This module can display digital video input signals conforming to the DVI (Digital Visual Interface) single-
channel...