D-Link Router DIR-605L User Manual

							17
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Se\fect Dynamic (most common) or  S\fa\fic. Se\fect S\fa\fic if your 
ISP  assi\bned  you  the  IP  address,  subnet  mask,  \bateway,  and 
DNS server addresses.
Enter the IP address (Static L2TP on\fy).
Enter the Primary and Secondary DNS Server Addresses (Static 
L2TP on\fy).
Enter the Gateway IP Address provided by your ISP.
The DNS server information wi\f\f be supp\fied by your ISP (Inter -
net Service Provider.)
Enter the Server IP provided by your ISP (optiona\f).
Enter your L2TP account name.
Enter your L2TP password and then retype the password in the 
next box.
Enter a maximum id\fe time durin\b which the Internet connection 
is maintained durin\b inactivity. To disab\fe this feature, enab\fe 
Auto-reconnect.
Maximum Transmission Unit - You may need to chan\be the MTU 
for optima\f performance with your specific ISP. 
Se\fect either A\fways-on, Manua\f, or Connect-on demand.
L2TP:
IP Address:
Subne\f Mas\b:
Ga\feway: DNS:
Server IP:
L2TP Accoun\f:
L2TP Password:
Maximum Idle  Time:  
MTU:  
Connec\f Mode:
In\ferne\f Se\fup
L2TP
Choose L2TP (Layer 2 Tunne\fin\b Protoco\f) if your ISP uses a L2TP connection. Your ISP wi\f\f provide you with a username and 
password. This option is typica\f\fy used for DSL services. 
DIR-605L  
						

							18
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Wireless Se\fup
Wire\fess  settin\bs  for  the  router  may  be  confi\bured 
manua\f\fy or by usin\b a wizard. To use the wizard, c\fick 
the  Wireless Connec\fion Se\fup Wizard  button and then 
fo\f\fow the steps that are described be\fow. To confi\bure 
the wire\fess settin\bs manua\f\fy, c\fick the  Manual Wireless 
Connec\fion  Se\fup  button.  The  parameters  for  this 
window are described \fater in this section. The Wire\fess 
Security section that direct\fy fo\f\fows this Confi\buration 
section  provides    additiona\f  exp\fanation  for  how  to 
confi\bure the WEP, WPA, WPA2, and WPA/WPA2 wire\fess 
security mode options. 
C\fick Nex\f to continue.
Enter a Wire\fess Network Name in the textbox, which is a\fso 
known as the SSID, and then c\fick Nex\f to continue.DIR-605L  
						

							19
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Enter a Wire\fess Security Password in the textbox and then c\fick  Nex\f to continue.
This window disp\fays a summary of your wire\fess security settin\bs. P\fease print 
this out or record this information in a safe p\face and then c\fick  Save to continue.
The Router wi\f\f save your new settin\bs and reboot. When it is finished after 1-2 
minutes, the openin\b Wire\fess Setup window is disp\fayed.  
						

							20
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
To  imp\fement Wi-Fi  protection,  or WCN  2.0,  tick  the  Enab\fe 
checkbox,  c\fick  either  Genera\fe  New  PIN or Rese\f  PIN  \fo 
Defaul\f, and then confi\bure the Wi-Fi settin\bs be\fow. P\fease 
see  the  Settin\b  Up  Wi-Fi  Protection  ( WCN  2.0  in  Windows 
Vista) section \fater in this manua\f for detai\fed confi\buration 
information. 
Check  the  box  to  enab\fe  the  wire\fess  function.  If  you  do 
not want to use wire\fess, uncheck the box to disab\fe a\f\f the 
wire\fess functions.
Service  Set  Identifier  (SSID)  is  the  name  of  your  wire\fess 
network. Create a name usin\b up to 32 characters. The SSID 
is case-sensitive.
Indicates  the  channe\f  settin\b  for  the  DIR-605L.  By  defau\ft 
the  channe\f  is  set  to  6.  The  Channe\f  can  be  chan\bed  to  fit 
the  channe\f  settin\b  for  an  existin\b  wire\fess  network  or  to 
customize the wire\fess network. The  Au\fo Channel Selec\fion 
settin\b can be se\fected to a\f\fow the DIR-605L to choose the 
channe\f with the \feast \uamount of interference.
Wi-Fi Pro\fec\fed 
Se\fup:
Enable 
Wireless Channel: Wireless Ne\fwor\b 
Name:
Transmission  Ra\fe:
WMM Enable:
Enable Wireless:
Enable Hidden  Wireless:
DIR-605L
Use the drop-down menu to se\fect the appropriate Transmission Rate in Mbits per second. Many users wi\f\f want to use the defau\ft 
settin\b, Best (automatic).
Enab\fe Wi-Fi Mu\ftimedia to enjoy basic qua\fity of service features. WMM prioritizes traffic accordin\b to four access cate\bories: voice, 
video, best effort, and back\bround. 
Check this option if you wou\fd not \fike the SSID of your wire\fess network to be broadcasted by the DIR-605L. If this option is checked, 
the SSID of the DIR-605L wi\f\f not be seen by Site Survey uti\fities so your wire\fess c\fients wi\f\f have to know the SSID of your DIR-605L 
in order to connect to it.  
						

							21
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
1.  To  enab\fe  wire\fess  security  on  the  Router,  use  the 
drop-down  menu  to  se\fect  the  desired  option.  To 
enab\fe WEP, se\fect  E\bable WEP Wireless Security (basic) .
2.  Next to  Au\fhen\fica\fion , se\fect either Ope\b   or Shared 
Key. Shared Key provides \breater security.
3.  Se\fect either  64Bit or 128Bit  encryption from the drop-
down menu next to WEP Encryp\fion. 
4. Next to  Defaul\f Key Type, se\fect  WEP Key 1 and enter 
a WEP key that you create. Make sure you enter this 
key exact\fy on a\f\f your wire\fess devices. You may enter 
up to four different keys either usin\b  Hex or ASCII . Hex 
is recommended (\fetters A-F and numbers 0-9 are va\fid). 
In  ASCII a\f\f numbers and \fett\uers are va\fid.
5.  C\fick  Save  Se\f\fings  to  save  your  settin\bs.  If  you  are 
confi\burin\b the Router with a wire\fess adapter, you 
wi\f\f \fose connectivity unti\f you enab\fe WEP on your 
adapter  and  enter  the  same WEP  key  as  you  did  on 
the Router.
NOTE:
It  is  recommended  to  enab\fe  encryption  on  your  wire\fess  Router 
before  your  wire\fess  network  adapters.  P\fease  estab\fish  wire\fess 
connectivity before enab\fin\b encryption. Your wire\fess si\bna\f may 
de\brade when enab\fin\b enc\uryption due to the added overhead.  
						

							22
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
1.  To enab\fe WPA, WPA2, or WPA/WPA2, se\fect either 
E\bable WPA O\bly Wireless Security (e\bha\bced), 
E\bable WPA2 O\bly Wireless Security (e\bha\bced), or 
E\bable WPA/WPA2 Wireless Security (e\bha\bced)\f
2. Next to Cipher Type, se\fect TKIP, AES, or Both.
3. Next to PSK/EAP, se\fect PSK.
4.  Next to Ne\fwor\b Key, enter a passphrase. The key 
is an a\fpha-numeric password between 8 and 63 
characters \fon\b. The password can inc\fude symbo\u\fs 
(!?*&_) and spaces. Make sure you enter this key 
exact\fy the same on a\f\f o\uther wire\fess c\fients.
5. C\fick Save Se\f\fings to save your settin\bs. If you are  confi\burin\b the router with a wire\fess adapter, you 
wi\f\f \fose connectivity unti\f you enab\fe WPA, WPA2, 
or WPA/WPA2 (whichever of the three options you 
have se\fected above) on your adapter and enter 
the same network key as you did on the router.  
						

							23
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
This section wi\f\f a\f\fow you to chan\be the \foca\f ne\utwork settin\bs of the router and to confi\bure the DHCP settin\bs.
LAN Se\fup
Enter  the  IP  address  of  the  router.  The  defau\ft  IP 
address is 192.168.0.1\u.
If you chan\be the IP address, once you c\fick  Apply, 
you  wi\f\f  need  to  enter  the  new  IP  address  in  your 
browser to \bet back into the confi\buration uti\fity.
Enter the Subnet Mask. The defau\ft subnet mask is 
255.255.255.0.
Enter the Domain name (Optiona\f).
Check the box to transfer the DNS server information 
from your ISP to your computers. If unchecked, your 
computers wi\f\f use the router for a DNS server.
Rou\fer IP Address:
Defaul\f Subne\f  Mas\b:
Local Domain  Name:
Enable DNS Relay:
Refer to the next pa\be for DHCP information.DIR-605L  
						

							24
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Check the box to enab\fe the DHCP server on your 
router. Uncheck to disab\fe this function.
Enter the startin\b and endin\b IP addresses for the 
DHCP server’s IP assi\bnment.
The \fen\bth of time for the IP address \fease. Enter 
the Lease time in minutes.
Enable DHCP 
Server:
DHCP IP
Address Range:
DHCP Lease  Time:
DHCP Server Se\f\fings
DHCP  stands  for  Dynamic  Host  Contro\f  Protoco\f.  The 
DIR-605L has a bui\ft-in DHCP server. The DHCP Server 
wi\f\f automatica\f\fy assi\bn an IP address to the computers 
on  the  LAN/private  net work .  Be  sure  to  set  your 
computers  to  be  DHCP  c\fients  by  settin\b  their TCP/IP 
settin\bs to “Obtain an IP Address Automatica\f\fy.” When 
you turn your computers on, they wi\f\f automatica\f\fy \foad 
the  proper  TCP/IP  settin\bs  provided  by  the  DIR-605L. 
The DHCP Server wi\f\f automatica\f\fy a\f\focate an unused 
IP  address  from  the  IP  address  poo\f  to  the  requestin\b 
computer.  You  must  specify  the  startin\b  and  endin\b 
address of the IP address poo\f.  
						

							25
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
This section wi\f\f a\f\fow you to confi\bure, update, and maintain the correct time on the interna\f system c\fock.
Time and Da\fe
Se\fect the Time Zone from the drop-down menu.
Tickin\b  this  checkbox  enab\fes  Day\fi\bht  Savin\b 
time.  C\fick  Sync.  your  compu\fer’s  \fime  se\f\fings 
to copy your PC’s time settin\bs.
Tick the “Automatica\f\fy synchronize with D-Link’s 
Internet  time  server”  checkbox  and  then  use  the 
drop-down menu to se\fect an NTP Server. NTP is 
short for Network Time Protoco\f. NTP synchronizes 
computer c\fock times in a\u network of computers. 
To  manua\f\fy  input  the  time,  enter  the  va\fues  in 
these fie\fds for the Year, Month, Day, Hour, Minute, 
and Second. C\fick Save Se\f\fings. 
Time Zone:
Enable
 Dayligh\f  Saving:
NTP
Server Used:
Manual:DIR-605L  
						

							26
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
This feature a\f\fows you to create a \fist of websites that you want to either a\f\fow or deny users access.
Paren\fal Con\frol
Se\fect  Turn  Parenta\f  Contro\f  OFF,  Turn  Parenta\f 
Contro\f ON and ALLOW computers access to ONLY 
these sites, or Turn Parenta\f Contro\f ON and DENY 
computers access to ONLY these sites.
Enter the keywords or URLs that you want to b\fock 
(or a\f\fow). Any URL with the keyword in it wi\f\f be 
b\focked.
The  schedu\fe  of  time  when  the  parenta\f  contro\f 
fi\fter wi\f\f be enab\fed. The schedu\fe may be set to 
A\fways,  which  wi\f\f  a\f\fow  the  particu\far  service  to 
a\fways be enab\fed. You can create your own times 
in the Main\fenance > Schedules section.
Configure
 Paren\fal Con\frol:
Websi\fe URL:
Schedule:DIR-605L