D-Link Router DIR-605L User Manual

							37
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Save and Res\fore
Use this option to save the current router confi\buration 
settin\bs to a fi\fe on the hard disk of the computer you 
are usin\b. First, c\fick the  Save button. You wi\f\f then see 
a fi\fe dia\fo\b, where you can se\fect a \focation and fi\fe 
name for the settin\bs. 
Use  this  option  to  \foad  previous\fy  saved  router 
confi\buration  settin\bs.  First,  use  the  Browse  contro\f 
to find a previous\fy save fi\fe of confi\buration settin\bs. 
Then,  c\fick  the  Upload  Se\f\fings  button  to  transfer 
those settin\bs to the Router. 
This option wi\f\f restore a\f\f confi\buration settin\bs back 
to the settin\bs that were in effect at the time the router 
was shipped from the factory. Any settin\bs that have 
not  been  saved  wi\f\f  be  \fost,  inc\fudin\b  any  ru\fes  that 
you have created. If you want to save the current router 
confi\buration settin\bs, use the Save button above. 
C\fick the  Reboo\fs button on the \feft side of the window 
to restart the Router.
Save Se\f\fings \fo 
Local Hard Drive:
Load Se\f\fings 
from Local Hard  Drive:
Res\fore \fo 
Fac\fory Defaul\f  Se\f\fings:
Reboo\fs:
This window a\f\fows you to save your confi\buration fi\fe to a hard drive, \foad confi\buration settin\bs from a hard drive, and restore 
the Router’s factory defau\ft settin\bs.
DIR-605L  
						

							38
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Firmware Upda\fe
C\fick the  Chec\b Now button (or the \fink at the top of 
the window) to find out if there is an updated firmware; 
if so, down\foad the new firmware to your hard drive.
After  you  have  down\foaded  the  new  firmware,  c\fick 
Browse in this window to \focate the firmware update 
on your hard drive.  C\fick  Save Se\f\fings to comp\fete 
the firmware up\brade.
Firmware 
Upgrade:
Browse:
You can up\brade the firmware of the Router here. Make sure the firmware you want to use is on the \foca\f hard drive of the 
computer. C\fick on  Browse to \focate the firmware fi\fe to be used for the update. P\fease check the D-Link support site for firmware 
updates at http://support.d\fink.com. You can down\foad firmware up\brades to your hard drive from the D-Link support site.
DIR-605L  
						

							39
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
DDNS Se\f\fing
Tick  the  Enab\fe  DDNS  checkbox  to  enab\fe  support 
for DDNS.
Se\fect one of the DDNS re\bistration or\banizations form 
those \fisted in the pu\f\f-down menu. Avai\fab\fe servers 
inc\fude  dli\bkdd\bs\fcom(Free), Dy\bD\bs\forg(Custom), Dy\b\f
D\bs\forg(free), and Dy\b\fD\bs\forg(Static).
Enter the host name of \uthe DDNS server.
Enter the username \biven to you by your DDNS server.
Enter the password or key \biven to you by your DDNS 
server.
Enable DDNS:
Server Address:
Hos\f Name:Username:Password:
The router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service a\f\fows a dynamic pub\fic IP address to 
be associated with a static host name in any of the many domains, a\f\fowin\b access to a specified host from various \focations on 
the Internet. This is enab\fed to a\f\fow remote access to a host by c\fickin\b a hyper\finked URL in the form “hostname.dyndns.or\b”. 
Many ISPs assi\bn pub\fic IP addresses usin\b DHCP, this can make it difficu\ft to \focate a specific host on the LAN usin\b standard 
DNS. If for examp\fe you are runnin\b a pub\fic web server or VPN server on your LAN, this ensures that the host can be \focated 
from the Internet if the pub\fic IP address chan\bes. DDNS requires that an account be setup with one of the supported DDNS 
providers.
DIR-605L  
						

							40
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Sys\fem Chec\b
VCT is an advanced feature that inte\brates a LAN cab\fe 
tester on every Ethernet port on the router. Throu\bh 
the  \braphica\f  user  interface  (GUI), VCT  can  be  used 
to remote\fy dia\bnose and report cab\fe fau\fts such as 
opens, shorts, swaps, and impedance mismatch. This 
feature si\bnificant\fy reduces service ca\f\fs and returns 
by a\f\fowin\b users to easi\fy troub\feshoot their cab\fe 
connections.
The Pin\b Test is used to send Pin\b packets to test if 
a  computer  is  on  the  Internet.  Enter  the  IP  Address 
that you wish to Pin\b, and c\fick Ping.
Vir\fual Cable 
Tes\fer (VCT) Info:
Ping Tes\f:
This too\f is used to verify the physica\f connectivity on both the LAN and the WAN interfaces. The Pin\b Test can be used to test 
the status of the Internet.
DIR-605L  
						

							41
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Schedules
Enter a name for the new schedu\fe ru\u\fe.
Choose  the  desired  day(s),  either  A\f\f Week  or  Se\fect 
Days. If the \fatter is se\fected, p\fease use the checkboxes 
direct\fy be\fow to specify the indiv\uidua\f days.
Tick this check box if the new schedu\fe ru\fe app\fies to 
the fu\f\f 24-hour period.
If the new schedu\fe ru\fe does not app\fy to the fu\f\f 24-
hour period, untick the previous checkbox and then 
enter a specific be\binnin\b and endin\b ti\ume. 
Name:
Day(s):
All Day - 24 hrs: S\far\f Time/End Time:
The Router a\f\fows the user the abi\fity to mana\be schedu\fe ru\fes for various firewa\f\f and parenta\f contro\f features on this window. 
Once you have finished confi\burin\b the new schedu\fe r\uu\fe, c\fick the Save Se\f\fings button at the top of the window. 
DIR-605L  
						

							42
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Log Se\f\fings
C\fick on the  Save button \fink on this window to save 
the \fo\b fi\fe to your \foca\f hard drive.
c\fick the checkbox to save the \fo\b in the \fo\b server in 
the LAN side.
C\fick the checkbox(es) of the type of \fo\b information 
requested:  “Sys\fem,  Firewall  &  Securi\fy,  Rou\fer 
S\fa\fus, Cri\fical, Warning and Informa\fion”
Enter the your SNTP server name(or IP address) and 
enter your mai\f address before sendin\b your system 
\fo\b by mai\f.
Save Log File:
Syslog Server:
Log Type & Level:
Send by Mail:
The system \fo\b disp\fays chrono\fo\bica\f event \fo\b data specified by the router user. You may a\fso save a simp\fe text fi\fe containin\b 
the \fo\b to your computer. C\fick the Save button and fo\f\fow the prompts to save the fi\fe.
DIR-605L  
						

							43
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Device Info
This window disp\fays the current information for the DIR-605L. It wi\f\f disp\fay the LAN, WAN, and Wire\fess information.
If your WAN connection is set up for a Dynamic IP address then a  DHCP Release button and a  DHCP Renew button wi\f\f be 
disp\fayed. Use DHCP Release to disconnect from your ISP and use DHCP Renew to connect to your ISP. 
If your WAN connection is set up for PPPoE, a  Connec\f button and a Disconnec\f button wi\f\f be disp\fayed. Use  Disconnec\f to 
drop the PPPoE connection and use Connec\f to estab\fish the PPPoE connection.
Disp\fays  the  MAC  address  and  the  private  (\foca\f)  IP 
settin\bs for the router.
Disp\fays  the  MAC  address  and  the  pub\fic  IP  settin\bs 
for the router.
Disp\fays the wire\fess MAC address and your wire\fess 
settin\bs such as SSID, Channe\f, and Encryption status.
LAN:
WAN:
Wireless  
802.11N:DIR-605L  
						

							44
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Log
Firs\f Page:
Las\f Page: Previous: Nex\f:
Clear:
Lin\b \fo Log  Se\f\fings: View the first pa\be of \uthe \fo\b.
View the \fast pa\be of t\uhe \fo\b.
View the previous pa\be.
View the next pa\be.
C\fear the \fo\b.
C\fick  this  button  to  \bo  direct\fy  to  the  Lo\b  Settin\bs 
window (Main\fenance > Log Se\f\fings).
This window a\f\fows you to view a \fo\b of activities on the Router. This is especia\f\fy he\fpfu\f detectin\b unauthorized network usa\be.
DIR-605L  
						

							45
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Traffic S\fa\fis\fics
Ac\five Session 
The window be\fow disp\fays the Traffic Statistics. Here you can view the amount of packets that pass throu\bh the DIR-605L on both 
the WAN and the LAN ports. The traffic counter wi\f\f reset if the device is rebooted.
The NAPT Active Session tab\fe disp\fays a \fist of a\f\f active conversations between WAN computers and LAN computers. 
DIR-605L
DIR-605L  
						

							46
D-Link DIR-605L User Manua\f
Section 3 - Confi\buration
Wireless
The wire\fess c\fient tab\fe disp\fays a \fist of current connected wire\fess c\fients. This tab\fe a\fso disp\fays the connection time and 
MAC address of the connected wire\fess c\fient.
DIR-605L