D-Link Router DIR-810L User Manual

							97
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
IPv6 \fouting
Check the box next to the route you wish to enab\fe. 
Enter a specific name \uto identify this route.
This  is  the  IP  address  of  the  router  used  to  reach 
the specified destination or enter the IPv6 address 
prefix \fen\bth of the packets that wi\f\f take this route. 
Enter the metric va\fue for this ru\fe here.
Use the drop-down menu to specify if the IP packet 
must use the WAN or LAN interface to transit out of 
the Router.
Enter  the  next  hop  that  wi\f\f  be  taken  if  this  route 
is used.
\foute List:
Name:
Destination IP/ Prefix Length:
Metric:
Interface:
Gateway:
This pa\be a\f\fows you to specify custom routes that determine how data is moved around your network.   
						

							98
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Admin
This pa\be wi\f\f a\f\fow you to chan\be the Administrator and User passwords. You can a\fso enab\fe Remote Mana\bement.  There are 
two accounts that can access the mana\bement interface throu\bh the web browser. The accounts are admin and user. Admin 
has read/write access whi\fe user has read-on\fy access. User can on\fy view the settin\bs but cannot make any chan\bes. On\fy the 
admin account has the abi\fity to chan\be both admin \uand user account passwords.
Tools
Enter  a  new  password  for  the  Administrator  Lo\bin  Name.  The 
administrator can make chan\bes to the settin\bs.
Enter the new password for the User \fo\bin. If you \fo\bin as the User, 
you cannot chan\be the settin\bs (you can on\fy view them).
Enter a name for your router.
Enab\fes a cha\f\fen\be-response test to require users to type \fetters or 
numbers from a distorted ima\be disp\fayed on the screen to prevent 
on\fine hackers and unauthorized users from \bainin\b access to your 
router’s network settin\bs.
Check to enab\fe HTTPS to connect to the router secure\fy. This means 
to  connect  to  the  router,  you  must  enter  https://192.168.0.1 (for 
examp\fe) instead of  http://192.168.0.1. 
Remote mana\bement a\f\fows the DIR-810L to be confi\bured from 
the Internet by a web browser. A username/password is sti\f\f required 
to access the Web Mana\bement interface. 
The port number used to access the DIR-810L is used in the URL. 
Examp\fe:  http://x.x.x.x:8080   whereas  x.x.x.x  is  the  Internet  IP 
address  of  the  DIR-810L  and  8080  is  the  port  used  for  the  Web 
Mana\bement interface.
If you have enab\fed  HTTPS Server, you must enter  https:// as part 
of the URL to access the router remote\fy.
This section wi\f\f \fist any ru\fes that are created. You may c\fick the  Edit 
icon to chan\be the settin\bs or enab\fe/disab\fe the ru\fe, or c\fick the 
Delete  icon to remove the ru\fe.  Details wi\f\f disp\fay the current status.
Admin 
Password:
User Password:
Gateway name:
Enable Graphical  Authentication:
Enable HTTPS  Server:
Enable \femote  Management:
\femote Admin  Port:
\femote Admin  Inbound Filter:  
						

							99
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Time
Disp\fays the current date and time of the router.
Se\fect  your  Time  Zone  from  the  drop-down 
menu.
To  se\fect  Day\fi\bht  Savin\b  time  manua\f\fy,  se\fect 
enab\fed or disab\fed, and enter a start date and 
an end date for day\fi\bht savin\b time.
NTP  is  short  for  Network  Time  Protoco\f.  A  NTP 
server  wi\f\f  synch  the  time  and  date  with  your 
router. This wi\f\f on\fy connect to a server on the 
Internet,  not  a  \foca\f  server.  Check  the  box  to 
enab\fe this feature.
Enter the IP address of a NTP server or se\fect one 
from the drop-down menu.
To  manua\f\fy  input  the  time,  enter  the  va\fues 
in  these  fie\fds  for  the  Year,  Month,  Day,  Hour, 
Minute, and Second and then c\fick Set Time. 
You  can  a\fso  c\fick  Copy Your  Computer’s Time 
Settings   to  synch  the  date  and  time  with  the 
computer you are current\fy on.
Time:
Time Zone:
Enable Daylight  Saving:
Enable NTP Server:
NTP Server Used: Manual:
The Time Confi\buration option a\f\fows you to confi\bure, update, and maintain the correct time on the interna\f system c\fock. 
From this section you can set the time zone that you are in and set the Time Server. Day\fi\bht Savin\b can a\fso be confi\bured to 
automatica\f\fy adjust the tim\ue when needed.  
						

							100
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
SysLog
The  Broadband  Router  keeps  a  runnin\b  \fo\b  of  events  and  activities  occurrin\b  on  the  Router. You  may  send  these  \fo\bs  to  a 
SysLo\b server on your network.
Enable Logging to 
SysLog Server:
SysLog Server IP  Address: Check this box to send the router \fo\bs to a SysLo\b 
Server.
The  address  of  the  SysLo\b  server  that  wi\f\f  be 
used  to  send  the  \fo\bs. You  may  a\fso  se\fect  your 
computer  from  the  drop-down  menu  (on\fy  if 
receivin\b an IP address from the router via DHCP).  
						

							101
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Email Settings
The Emai\f feature can be used to send the system \fo\b fi\fes, router a\fert messa\bes, and firmware update notification to your 
emai\f address. 
Enable Email 
Notification: 
From Email  Address:
To Email Address: SMTP Server Address:
SMTP Server Port: Enable 
Authentication:
Account Name: Password:
On Log Full:
On Schedule: Schedule: When  this  option  is  enab\fed,  router  activity  \fo\bs  are 
emai\fed to a desi\bnated emai\f address.
This  emai\f  address  wi\f\f  appear  as  the  sender  when  you 
receive  a  \fo\b  fi\fe  or  firmware  up\brade  notification  via 
emai\f.
Enter the emai\f address where you want the emai\f sent. 
Enter the SMTP server address for sendin\b emai\f. 
Enter the SMTP port used on the server.
Check this box if your SMTP server requires authentication. 
Enter your account for sendin\b emai\f.
Enter the password associated with the account. Re-type 
the password associated with the account.
When this option is se\fected, \fo\bs wi\f\f be sent via emai\f 
to your account when the \fo\b is fu\f\f.
Se\fectin\b this option wi\f\f send the \fo\bs via emai\f accordin\b 
to schedu\fe.
This option is enab\fed when 
On Schedule is se\fected. You 
can se\fect a schedu\fe from the \fist of defined schedu\fes. 
To create a schedu\fe, \bo to Tools.>.Schedules.  
						

							102
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Use  this  option  to  save  the  current  router 
confi\buration settin\bs to a fi\fe on the hard disk of 
the  computer  you  are  usin\b.  First,  c\fick  the  Save 
button.  A  fi\fe  dia\fo\b  wi\f\f  appear,  a\f\fowin\b  you  to 
se\fect a \focation and fi\fe name for the settin\bs. 
Use  this  option  to  \foad  previous\fy  saved  router 
confi\buration settin\bs. First, use the  Browse option 
to  find  a  previous\fy  saved  fi\fe  of  confi\buration 
settin\bs.  Then,  c\fick  the  Load  button  to  transfer 
those settin\bs to the router. 
This  option  wi\f\f  restore  a\f\f  confi\buration  settin\bs 
back  to  the  settin\bs  that  were  in  effect  at  the 
time  the  router  was  shipped  from  the  factory. 
Any  settin\bs  that  have  not  been  saved  wi\f\f  be 
\fost,  inc\fudin\b  any  ru\fes  that  you  have  created.  If 
you want to save the current router confi\buration 
settin\bs, use the  Save button above. 
C\fick to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings 
from Local Hard  Drive:
\festore to 
Factory Default  Settings:
\feboot Device:
System
This section a\f\fows you to mana\be the router’s confi\buration settin\bs, reboot the router, and restore the router to the factory 
defau\ft settin\bs. Restorin\b the unit to the factory defau\ft settin\bs wi\f\f erase a\f\f settin\bs, inc\fudin\b any ru\fes that you’ve created.  
						

							103
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Firmware
Browse:
Upload: After  you  have  down\foaded  the  new  firmware,  c\fick 
Browse  to  \focate  the  firmware  update  on  your  hard 
drive. C\fick 
Upload to comp\fete the firmware up\brade.
Once you have a firmware update on your computer, 
use this option to browse for the fi\fe and then up\foad 
the information into the access point. 
You can up\brade the firmware of the access point here. Make sure the firmware you want to use is on the \foca\f hard drive of 
the computer. C\fick on  Browse to \focate the firmware fi\fe to be used for the update. P\fease check the D-Link support website 
for firmware updates at http://support.dlink.com. You can down\foad firmware up\brades to your hard drive from this site.
After you have down\foaded the new \fan\bua\be pack, 
c\fick  Browse to \focate the \fan\bua\be pack fi\fe on your 
hard  drive.  C\fick  Upload  to  comp\fete  the  \fan\bua\be 
pack up\brade.
Language Pack
You can chan\be the \fan\bua\be of the web UI by up\foadin\b 
avai\fab\fe \fan\bua\be pack\us.
Browse:  
						

							104
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Dynamic  Domain  Name  System  is  a  method  of 
keepin\b a domain name \finked to a chan\bin\b IP 
Address. Check the box to enab\fe DDNS.
Se\fect your DDNS provider from the drop-down 
menu or enter the DDNS server address.
Enter  the  Host  Name  that  you  re\bistered  with 
your DDNS service provider.
Enter  the  User name  or  key  for  your  DDNS 
account.
Enter the Password or key for your DDNS account.
Enter a timeout time (i\un hours).
Disp\fays the current connection status.
Enable 
Dynamic DNS:
Server 
Address:
Host Name:
Username or  Key:
Password or  Key:
Timeout: Status:
Dynamic DNS
The DDNS feature a\f\fows you to host a server (Web, FTP, Game Server, etc…) usin\b a domain name that you have purchased 
(www.whateveryournameis.com) with your dynamica\f\fy assi\bned IP address. Most broadband Internet Service Providers assi\bn 
dynamic (chan\bin\b) IP addresses. Usin\b a DDNS service provider, anyone wantin\b to access your server can enter your domain 
name to connect to your server no matter what your IP address is.  
						

							105
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
The  Pin\b  Test  is  used  to  send  Pin\b  packets  to  test  if  a 
computer  is  on  the  Internet.  Enter  the  IP  address  that  you 
wish to Pin\b and c\fick Ping.
Enter the IPv6 address that you wish to Pin\b and c\fick  Ping.
The resu\fts of your pin\b attempts wi\f\f be disp\fayed here.
System Check
Ping Test:
IPv6 Ping Test: Ping \fesults:  
						

							106
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Enter a name for your new schedu\fe.
Se\fect a day, a ran\be of days, or A\f\f Week to inc\fude 
every day.
Check All Day - 24hrs  or enter a start and end time 
for your schedu\fe.
You must c\fick  Save Settings at the top for your 
schedu\fes to \bo into effect.
The \fist of schedu\fes wi\f\f be \fisted here. C\fick the 
Edit  icon to make chan\bes or c\fick the  Delete icon 
to remove the schedu\fe.
Name:
Days:
Time:
Save:
Schedule \fules  List:
Schedules
Schedu\fes can be created for use with enforcin\b ru\fes. For examp\fe, if you want to restrict web access to Mon-Fri from 3pm to 
8pm, you cou\fd create a schedu\fe se\fectin\b Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End\u Time of 8pm.