Dukane Projector 6860WUSS User Manual
Here you can view all the pages of manual Dukane Projector 6860WUSS User Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 181
168 ❼ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages POWER Indicator Indicator display Projector status Procedure Off Power is off.– Flashing Blue (short flashes)Preparing to turn power onWait a while. Blue (long flashes)Off timer (enabled) Program timer (off time enabled) – Orange (short flashes)Projector coolingWait a while. Orange (long flashes)Program timer (on time enabled)– Lit Blue Power on– Red Standby mode...
Page 182
169 LIGHT Indicator Indicator display Projector status Procedure Off The light module is turned off. – Lit Green Light module lit– TEMP. Indicator Indicator display Projector status Procedure Off No problem FlashingRed (cycles of 2) Temperature problemThe temperature protector has been activated. If the room temperature is high, move the projector to a cool place. If the problem still persists, contact an NEC projector cus- tomer support center. Lit OrangeHigh surrounding tem- perature (Forced ECO...
Page 183
![Page 183
170
Common Problems & Solutions
(→ “POWER/STATUS/LIGHT Indicator” on page 168, 169.)
ProblemCheck These Items
Does not turn on
or shut down• Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on� (→ pages 13, 14)• Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room where you are presenting is particularly warm, move the projector t\
o a cooler location�• The light module...](http://img.usermanuals.tech/thumb/5762/100299/w300_projector_manual_9360_d-182.png "Page 183
170
Common Problems & Solutions
(→ “POWER/STATUS/LIGHT Indicator” on page 168, 169.)
ProblemCheck These Items
Does not turn on
or shut down• Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on� (→ pages 13, 14)• Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room where you are presenting is particularly warm, move the projector t\
o a cooler location�• The light module...")
170 Common Problems & Solutions (→ “POWER/STATUS/LIGHT Indicator” on page 168, 169.) ProblemCheck These Items Does not turn on or shut down• Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on� (→ pages 13, 14)• Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room where you are presenting is particularly warm, move the projector t\ o a cooler location�• The light module...
Page 184
![Page 184
171
ProblemCheck These Items
Remote control does
not work• Install new batteries. (→ page 10)• Make sure there are no obstacles between you and the projector.• Stand within 22 feet (7 m) of the projector. (→ page 11)
Indicator is lit or
blinking
• See the POWER/STATUS/LIGHT Indicator. (→ page 168, 169)
Cross color in RGB
mode
• Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 23)• Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the...](http://img.usermanuals.tech/thumb/5762/100299/w300_projector_manual_9360_d-183.png "Page 184
171
ProblemCheck These Items
Remote control does
not work• Install new batteries. (→ page 10)• Make sure there are no obstacles between you and the projector.• Stand within 22 feet (7 m) of the projector. (→ page 11)
Indicator is lit or
blinking
• See the POWER/STATUS/LIGHT Indicator. (→ page 168, 169)
Cross color in RGB
mode
• Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 23)• Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the...")
171 ProblemCheck These Items Remote control does not work• Install new batteries. (→ page 10)• Make sure there are no obstacles between you and the projector.• Stand within 22 feet (7 m) of the projector. (→ page 11) Indicator is lit or blinking • See the POWER/STATUS/LIGHT Indicator. (→ page 168, 169) Cross color in RGB mode • Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 23)• Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the...
Page 185
172 If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If...
Page 186
173 ❽ PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT HDMI 02H 03H 00H 00H 02H 01H A1H A9H INPUT SELECT DisplayPort 02H 03H 00H 00H 02H 01H A6H AEH INPUT SELECT BNC 02H 03H 00H 00H 02H 01H 02H 0AH INPUT SELECT BNC(CV) 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT BNC(Y/C) 02H 03H 00H 00H 02H 01H 0BH 13H INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT HDBaseT 02H 03H 00H 00H 02H 01H...
Page 187
174 ❾ Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check. Frequency of occurrence □ always □ sometimes (How often?_____________________) □ other (__________________) Power □ No power (POWER indicator does not light blue)� See...
Page 188
![Page 188
175
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
ProjectorPC
Blu-ray player
ProjectorModel number:
Serial No�:
Date of purchase:
Light module operating time (hours):
Eco Mode: □ OFF □ ON
Information on input signal:
Horizontal synch frequency [ ] kHz
Vertical synch frequency [ ] Hz
Synch polarity H □ (+) □ (−)
V □ (+) □ (−)
Synch type □ Separate □ Composite
□ Sync on Green
STATUS Indicator:
Steady light □...](http://img.usermanuals.tech/thumb/5762/100299/w300_projector_manual_9360_d-187.png "Page 188
175
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
ProjectorPC
Blu-ray player
ProjectorModel number:
Serial No�:
Date of purchase:
Light module operating time (hours):
Eco Mode: □ OFF □ ON
Information on input signal:
Horizontal synch frequency [ ] kHz
Vertical synch frequency [ ] Hz
Synch polarity H □ (+) □ (−)
V □ (+) □ (−)
Synch type □ Separate □ Composite
□ Sync on Green
STATUS Indicator:
Steady light □...")
175 In the space below please describe your problem in detail. Information on application and environment where your projector is used ProjectorPC Blu-ray player ProjectorModel number: Serial No�: Date of purchase: Light module operating time (hours): Eco Mode: □ OFF □ ON Information on input signal: Horizontal synch frequency [ ] kHz Vertical synch frequency [ ] Hz Synch polarity H □ (+) □ (−) V □ (+) □ (−) Synch type □ Separate □ Composite □ Sync on Green STATUS Indicator: Steady light □...
Page 189
DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 [email protected] www.dukaneav.com 430-6860 Series-User-Manual.00