Fujifilm Camera X100t Owners Manual

							Choose the information displayed in the optical viewfinder or in the electronic viewfinder and
LCD monitor.
Select  [DISP. CUSTOM SETTING]  in the shooting menu.
1. 
Highlight [OVF] or [EVF/LCD]  and press [MENU/OK] .2. 
Highlight items and press  [MENU/OK] to select or deselect. Selected items are indicated
by a check mark.3. 
Press  [DISP/BACK] to exit when settings are complete.4. 
[FRAMING GUIDELINE]
[ELECTRONIC LEVEL]
[AF DISTANCE INDICATOR]
[MF DISTANCE INDICATOR]
[HISTOGRAM]
[APERTURE/S-SPEED/ISO]
[EXP. COMPENSATION]
[PHOTOMETRY]
[FLASH]
[WHITE BALANCE]
[FILM SIMULATION]
[DYNAMIC RANGE]
[FRAMES REMAINING]
[IMAGE SIZE/QUALITY]
[MOVIE MODE & REC. TIME]
[BATTERY LEVEL]
[DISP. CUSTOM SETTING]
002D0020 0031003700310020 002D  
						

							WIDETELE OFF
Adjust settings for optional conversion lenses.
Choose when using an optional WCL-X100 conversion lens.
Choose when using an optional TCL-X100 conversion lens.
Choose when no conversion lens is attached.
Attach The Conversion Lens
Using a Wide Conversion Lens
[CONVERSION LENS]
002D0020 0031003700320020 002D  
						

							Remove the front ring.
If you have trouble removing the front ring, grip the entire ring and rotate it as
shown.
1. 
Attach the conversion lens.2. 
Keep the front ring and lens cap in a safe place when not in use.
[CONVERSION LENS]
002D0020 0031003700330020 002D  
						

							When using an optional WCL-X100 wide conversion lens, select [WIDE] for [CONVERSION
LENS] . An icon will be displayed.
Because the optical viewfinder does  not cover the full field of view of the conversion lens, the
bright frame is replaced by brackets showing  approximately 80% of the field of view. For
accurate framing, compose pictures using the electronic viewfinder or LCD monitor.
The built-in flash may fail to light the entire  subject. We recommend using an optional
external flash designated for use with this camera.
[CONVERSION LENS]
002D0020 0031003700340020 002D  
						

							[STANDARD]
[DIGITAL SPLIT IMAGE]
[FOCUS PEAK HIGHLIGHT]
Choose how focus is displayed in manual focus mode. Focus is displayed normally (focus peaking and digital split
image are not available).
A black-and-white split-image display.
The camera heightens high-contrast outlines. Choose a
color and peaking level.
See Also
Manual Focus (Focus Mode M)  (More on Photography)
[MF ASSIST]
002D0020 0031003700350020 002D  
						

							 [TOY CAMERA] [MINIATURE]
 [POP COLOR]  [HIGH-KEY] [LOW-KEY]
 [DYNAMIC TONE]  [SOFT FOCUS]
 [PARTIAL COLOR (RED)]
[PARTIAL COLOR (ORANGE)] [PARTIAL COLOR (YELLOW)] [PARTIAL COLOR (GREEN)] [PARTIAL COLOR (BLUE)]
[PARTIAL COLOR (PURPLE)] [OFF]
Take photos with filter effects. Choose for a retro toy camera effect.
The tops and bottoms of pictures are blurred for a
diorama effect.
Create high-contrast images with saturated colors.
Create bright, low-contrast images.
Create uniformly dark tones with few areas of
emphasized highlights.
Dynamic tone expression is used for a fantasy effect.
Create a look that is evenly soft throughout the
whole image.
Reds are recorded in colo r, while other colors are
recorded in black and white.
Orange objects are recorded in color, while other
colors are recorded in black and white.
Yellows are recorded in color, while other colors are
recorded in black and white.
Greens are recorded in color, while other colors are
recorded in black and white.
Blues are recorded in color, while other colors are
recorded in black and white.
Purples are recorded in color, while other colors are
recorded in black and white.
Advanced filters off.
Depending on the subject and camera settings , images may in some cases be grainy or
vary in brightness and hue.
Selecting an advanced filter sets the  [SCREEN SET-UP] > [ IMAGE DISP.]  option in
the setup menu to  [0.5 SEC].
[ADVANCED FILTER]
002D0020 0031003700360020 002D  
						

							Adjust settings for interval timer photography.Select  [INTERVAL TIMER SHOOTING]  in the shooting menu to display interval timer
shooting options.
1. 
Use the selector to choose the inte rval and number of shots. Press [MENU/OK] to
proceed.2. 
Use the selector to choose the starting time and then press  [MENU/OK]. Shooting will
start automatically.3. 
Interval timer photography can not be used  during panorama or multiple exposure
photography. In burst mode, only one pict ure will be taken each time the shutter is
released.
[INTERVAL TIMER SHOOTING]
002D0020 0031003700370020 002D  
						

							Use of a tripod is recommended.
Check the battery level before starting.
The display turns off between shots and lights a few seconds before the next shot is
taken. The display can be activated at any time by pressing the shutter button all the
way down.
[INTERVAL TIMER SHOOTING]
002D0020 0031003700380020 002D  
						

							OFF
Use the timer for self-portraits or to prevent blur caused by camera shake.
The shutter is released two seconds afte r the shutter button is pressed. Use to
reduce blur caused by the camera moving  when the shutter button is pressed. The
self-timer lamp will blink as the timer counts down.
The shutter is released ten seconds afte r the shutter button is pressed. Use for
self-portraits. The self-timer  lamp on the front of the camera lights when the timer
starts and begins to blink shor tly before the photo is taken.
Self-timer off.
[SELF-TIMER]
002D0020 0031003700390020 002D  
						

							If [AE&AF ON WHEN PRESSING] is selected, exposure and/or focus will lock while the
[AEL/AFL]  button is pressed. If  [AE&AF ON/OFF SWITCH]  is selected, exposure and/or
focus will lock while the  [AEL/AFL] button is pressed and remain locked until the button is
pressed again.
[AE/AF-LOCK MODE]
002D0020 0031003800300020 002D