Fujifilm Camera X100t Owners Manual

							Select the website of your country or region (the new window will open).
Country/RegionCountry/Region
Country/RegionCountry/Region
Country/Region
Website of the country or region of purchase
002D0020 0032003700310020 002D  
						

							For Your Safety
For Your Safety
002D0020 0032003700320020 002D  
						

							Safety precautions are described in the following pdf:
See Also
For Your Safety (PDF:  )
For Your Safety
002D0020 0032003700330020 002D  
						

							Troubleshooting/FAQ
Warning Messages and Displays
Specifications
Links
Restrictions on Camera Settings
Appendix
002D0020 0032003700340020 002D  
						

							Power and Battery
Menus and Displays
Shooting
Playback
Connections/Miscellaneous
ProblemSolution
The camera does not
turn on.
The battery is exhausted:  Charge the battery or insert a fully-
charged spare battery.
The battery is inserted incorrectly:  Reinsert in the correct
orientation.
The battery-chamber cover is not latched:  Latch the battery-
chamber cover.
The camera was turned on immediately after having been
turned off:  Press the shutter button halfway.
The battery runs down
quickly.
The battery is cold:  Warm the battery by placing it in a pocket
or other warm place and reinsert  it in the camera immediately
before taking a picture.
There is dirt on the battery terminals: Clean the terminals with
a soft, dry cloth.
The battery has been charged many times:  The battery has
reached the end of its charging  life. Purchase a new battery.
[C] is selected for focus mode:  Select a different focus mode.
The camera turns off
suddenly.
The battery is exhausted:  Charge the battery or insert a fully-
charged spare battery.
The camera has entered sleep mode:  Press the shutter button
halfway.
Charging does not start. Reinsert the battery in the correct orientation and make sure that
the charger is plugged in.
Charging is slow. Charge the battery at room temperature.
Troubleshooting/FAQ
002D0020 0032003700350020 002D  
						

							ProblemSolution
The charging lamp
blinks, but the battery
does not charge.
There is dirt on the battery terminals: Clean the terminals with
a soft, dry cloth.
The battery has been charged many times:  The battery has
reached the end of its charging  life. Purchase a new battery. If
the battery still fails to charge,  contact your FUJIFILM dealer.
Problem Solution
Menus and displays are not in English. Select [ENGLISH]  for [ ].
Problem Solution
No picture is taken when the
shutter button is pressed.
Memory is full: Insert a new memory card or delete
pictures.
Memory is not formatted:  Format the memory card or
internal memory.
There is dirt on the memory card contacts:  Clean the
contacts with a soft, dry cloth.
The memory card is damaged:  Insert a new memory card.
The battery is exhausted: Charge the battery or insert a
fully-charged spare battery.
The camera has turned off automatically:  Turn the camera
on.
The indicator lamp was orange when you attempted to
record a panorama:  Wait until the indicator lamps turns
off.
The display goes dark after
shooting. The display may darken while the flash charges. Wait for the
flash to charge.
Mottling (“noise”) appears in
the monitor or viewfinder
when the shutter button is
pressed halfway.
Gain is increased to aid composition when the subject is
poorly lit and aperture is  stopped down, which may result
in noticeable mottling when images are previewed in the
displays. Images taken with the camera are unaffected.
Troubleshooting/FAQ
002D0020 0032003700360020 002D  
						

							ProblemSolution
The camera does not focus.
The subject is close to the camera:  Select macro mode.
The subject is far away from the camera:  Cancel macro
mode.
The subject is not suited to autofocus:  Use focus lock.
No face is detected.
The subject’s face is obscured by sunglasses, a hat, long
hair, or other objects:  Remove the obstructions.
The subject’s face occupies only a small area of the frame:
Change the composition so that the subject’s face occupies
a larger area of the frame.
The subject’s head is tilted or horizontal:  Ask the subject to
hold their head straight.
The camera is tilted:  Keep the camera level.
The subject’s face is poorly lit:  Shoot in bright light.
Wrong subject is selected. The selected subject is closer to the center of the frame than
the main subject. Recompose the picture or turn face
detection off and frame the picture using focus lock.
The flash does not fire.
The flash is charging:  Wait for the flash to charge before
pressing the shutter button.
The flash is off:  Choose a different flash mode.
The battery is exhausted:  Charge the battery or insert a
fully-charged spare battery.
The camera is in bracketing or continuous mode:  Select
single frame mode.
The camera is in silent mode:  Turn silent mode off.
Some flash modes are not
available.
The camera is in silent mode:  Turn silent mode off.
The flash does not fully light
the subject.
The subject is not in range of the flash:  Position the
subject in range of the flash.
The flash window is obstructed:  Hold the camera correctly.
Shutter speed is faster than 1/2000  s:  Choose a slower
shutter speed.
Troubleshooting/FAQ
002D0020 0032003700370020 002D  
						

							ProblemSolution
Pictures are blurred.
The lens is dirty:  Clean the lens.
The lens is blocked:  Keep objects away from the lens.
 is displayed during shoo ting and the focus frame is
displayed in red:  Check focus before shooting.
Pictures are mottled.
A slow shutter speed is sele cted at high temperatures: This
is normal and does not indicated a malfunction.
The camera has been used continuously at high
temperatures or a temperat ure warning is displayed: Turn
the camera off and wait  for it to cool down.
The viewfinder display is not
clear.
Diopter adjustment is not adjusted correctly:  Slide the
diopter adjustment control up and down until the
viewfinder display is in sharp focus.
Sounds made by the camera
are recorded with movies.
The focus mode selector is set to  [C]. Select a different
focus mode.
Intelligent Face Detection is on:  Turn Intelligent Face
Detection off.
Problem Solution
Pictures are grainy. The pictures were taken  with a different make or model of camera.
Playback zoom
unavailable. The picture has been saved at 
, or is from another make or
model of camera.
No sound in movie
playback.
The camera is in silent mode:  Turn silent mode off.
Playback volume is too low: Adjust playback volume.
The microphone was obstructed:  Hold the camera correctly
during recording.
The speaker is obstructed:  Hold the camera correctly during
playback.
Selected pictures are
not deleted. Some of the pictures selected for deletion are protected. Remove
protection using the device with which it was originally applied.
File numbering is
unexpectedly reset. The battery-chamber cover was op
ened while the camera was on.
Turn the camera off before op ening the battery-chamber cover.
Troubleshooting/FAQ
002D0020 0032003700380020 002D  
						

							ProblemSolution
No picture or sound.
The camera is not properly connected:  Connect the camera
properly. Note that once the came ra is connected, pictures will
be displayed on the TV instead of in the camera monitor.
Input on the television is set to “TV”:  Set input to “HDMI”.
The volume on the TV is too low: Adjust the volume.
The computer does not
recognize the camera. Be sure the camera and computer are correctly connected.
Can not transfer RAW or
JPEG files to computer. Use MyFinePix Studio to transfer pictures (Windows only).
Pictures can not be
printed.
The camera is not properly connected:  Connect the camera
correctly.
The printer is off:  Turn the printer on.
Only one copy is
printed/the date is not
printed. The printer is not PictBridge compatible.
The camera is
unresponsive.
Temporary camera malfunction:  Remove and reinsert the
battery.
The battery is exhausted:  Charge the battery or insert a fully-
charged spare battery.
The camera does not
function as expected. Remove and reinsert the battery. If the problem persists, contact
your FUJIFILM dealer.
No sound. Turn silent mode off.
The hybrid viewfinder
does not function as
expected.
The viewfinder is temporarily ma lfunctioning due to an impact
caused, for example, by the camera being dropped:  Turn the
camera on and then off again.
Troubleshooting/FAQ
002D0020 0032003700390020 002D  
						

							The following warnings are displayed in the LCD monitor:Warning Description
(red) Low battery. Charge the battery 
or insert a fully-charged spare
battery.
(blinks red) Battery exhausted. Charge the ba
ttery or insert a fully-charged
spare battery.
(displayed in red with red focus frame) The camera can not focus. Try one of the following solutions:
Use focus lock to focus on another subject at the same
distance, then recompose the picture.
Use macro mode to focus when taking close-ups.
Aperture or shutter
speed displayed in red The subject is too bright or too dark and the picture will be over-
or under-exposed. If the subject is dark, use the flash.
[FOCUS ERROR]
Camera malfunction. Turn the camera off and then on again. If
the message persists, contact a FUJIFILM dealer.
[TURN OFF THE
CAMERA AND TURN ON AGAIN]
[LENS CONTROL ERROR]
[CARD NOT
INITIALIZED] The memory card or internal memory is not formatted
or the memory card was formatted in a computer or
other device:
 Format the memory card or internal memory
using the  [FORMAT]  option in the camera setup menu.
The memory card contacts require cleaning:  Clean the
contacts with a soft, dry cloth. If the message is repeated,
format the card. If the messag e persists, replace the card.
Camera malfunction: Contact a FUJIFILM dealer.
[PROTECTED CARD] The memory card is locked. Unlock the card.
[BUSY] The memory card is incorrectly formatted. Use the camera to
format the card.
Turn the camera off and wait for it to cool. If no action is taken,
the camera will turn off automatically.
[CARD ERROR] The memory card is not formatted for use in the camera. Format
the card.
Warning Messages and Displays
002D0020 0032003800300020 002D