Fujifilm Camera X100t Owners Manual

							The Eye Sensor
The eye sensor turns the viewfinder on when you put your eye to the viewfinder and turns
it off when you take your eye away (note  that the eye sensor may respond to objects
other than your eye or to light shining dire ctly on the sensor). If automatic display
selection is enabled, the LC D monitor will turn on when  the viewfinder turns off.
The [VIEW MODE] Button
002D0020 003200310020 002D  
						

							Use the viewfinder selector to switch between the electronic viewfinder (EVF), the optical
viewfinder (OVF), and a dual optical viewfinder/electronic range finder (ERF) display.
Rotate the selector as shown to  choose from the following displays:
EVF
OVF
ERF (dual display)
The Viewfinder Selector
002D0020 003200320020 002D  
						

							The Hybrid (EVF/OVF/ERF) Viewfinder
The features of the different displays are described below.Display Description
OVF The optical display is sharp and free of blur so that your subject’s
expression is always visible. In 
addition, the OVF shows the area just
outside the frame, making it easier to compose shots on the fly.
Because the viewfinder window is a slight distance from the lens, the
area visible in photographs may however differ slightly from the
display in the viewfinder due to parallax.
EVF The live view display gives you a preview of the final picture (including
depth of field, focus, exposure, an
d white balance) with exactly the
same frame coverage.
ERF
(dual display) As for the optical viewfinder but 
with a focus preview. A magnified
view of the current focus position  is shown at the bottom right corner
of the display.
The brightness and clarity of  the EVF and LCD monitor can be adjusted using the
[SCREEN SET-UP]  options in the setup menu.
See Also
[SCREEN SET-UP] (The Setup Menu)
The Viewfinder Selector
002D0020 003200330020 002D  
						

							The [DISP/BACK] button controls the display of indicators in the viewfinder and LCD monitor.
Shooting: Optical Viewfinder
Shooting: Electronic Viewfinder
Shooting: LCD Monitor
Playback: Electronic Viewfinder/LCD Monitor
Standard Display
Standard
Information off
The [DISP/BACK] Button
002D0020 003200340020 002D  
						

							Standard
Information off
Standard
Information off
Info display
The [DISP/BACK] Button
002D0020 003200350020 002D  
						

							Standard
Information off
Info display
Favorites
The optical viewfinder can not be used for playback.
The [DISP/BACK] Button
002D0020 003200360020 002D  
						

							The items shown in the standard optical viewfinder and electronic viewfinder/LCD monitor
displays (display  ) can be  selected as described below.
Select  [DISP. CUSTOM SETTING]  in the shooting menu.
1. 
Highlight [OVF] or [EVF/LCD]  and press [MENU/OK] .2. 
Highlight items and press  [MENU/OK] to select or deselect. Selected items are indicated
by a check mark.3. 
Press  [DISP/BACK] to exit when settings are complete.4. 
ELECTRONIC LEVEL
Selecting  [ELECTRONIC LEVEL]  displays a virtual horizon. The camera is level when the
two lines overlap.
The virtual horizon may not be displayed if  the camera lens is pointed up or down.
[FRAMING GUIDELINE]
[ELECTRONIC LEVEL]
[AF DISTANCE INDICATOR]
[MF DISTANCE INDICATOR]
[HISTOGRAM]
[APERTURE/S-SPEED/ISO]
[EXP. COMPENSATION]
[PHOTOMETRY]
[FLASH]
[WHITE BALANCE]
[FILM SIMULATION]
[DYNAMIC RANGE]
[FRAMES REMAINING]
[IMAGE SIZE/QUALITY]
[MOVIE MODE & REC. TIME]
[BATTERY LEVEL]
The [DISP/BACK] Button
002D0020 003200370020 002D  
						

							Optimal exposureOverexposed
Underexposed
Histograms
Histograms show the distribution of tones  in the image. Brightness is shown by the
horizontal axis, the number of pixels by the vertical axis.
No. of pixels
Pixel brightness
Shadows
Highlights Pixels are distributed in an even curve throughout the tone
range.
Pixels are clustered on the right side of the graph.
Pixels are clustered on the left side of the graph.
The [DISP/BACK] Button
002D0020 003200380020 002D  
						

							The camera is equipped with diopter adjustment to accommodate individual differences in
vision. Rotate the diopter adjustment control until the viewfinder display is in sharp focus.
Diopter Adjustment
002D0020 003200390020 002D  
						

							Glows green
Blinks green
Blinks green and orange Glows orange
Blinks orange Blinks red
The indicator lamp shows camera status as follows:
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Recording pictures. Additional pictures can be taken.
Recording pictures. No additional pictures can be taken at this
time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
Warnings may also appear in the display.
The indicator lamp turns off when the viewfinder is in use.
Battery Charging Status
If the camera is connected to a computer to charge th e battery, the indicator lamp will
show charging status when the camera is off.
Indicator lamp Battery status
On Battery charging.
Off Charging complete.
Blinks Battery fault.
The Indicator Lamp
002D0020 003300300020 002D