GE Concord 4 User Manual

Concord  4 Series Security Systems21
Example 1 of One Day Rollover
At home you’d like the Latchkey Opening feature to be effective from 10 p.m. on Tuesday until 
5 a.m. on Wednesday (see Figure 8 Example 1).
By taking advantage of One Day Rollover, one time schedule can cover both days. (That sched-
ule is illustrated in Figure 8.)
Notice how the stop time is within 24 hours of the start time. The system knows to apply the stop 
time to the next day (5 a.m. on Wednesday).
Example 2 of One Day Rollover...

Concord  4 Series Security Systems22
• See “Opening and Closing Reports” for information on creating opening and closing sched-
ules.
• See “Latchkey Paging” for information on attaching time schedules to Latchkey Paging.
• See “Notify By Exception” for information on attaching time schedules to Notify by Excep-
tion. 
Time Schedules and Partitions
Once a schedule is attached to a feature event in one partition, that schedule becomes unavailable 
to the other partitions. This prevents the situation where...

Concord  4 Series Security Systems23
3. Press A or B until the light number (1–9) you would like to activate appears.
4. Enter the sensor number (1–96 for Concord 4, 1-32 for Concord Express V4) you wish to 
activate the light and press 
#.
5. Press 
B to assign another light to a sensor or press * + 00 + # to exit the programming 
menus.

Concord  4 Series Security Systems24
4. Press #. The touchpad displays the first available time schedule as “SCHEDULE 00 OFF,” or 
“SCH 00 OFF.”
5. Enter

Concord  4 Series Security Systems25
What Will the Pager Report?
For Latchkey Opening Reports, the page reports the arming level as 111 (1—OFF) and the user.
For Latchkey Closing Reports, the page reports the arming level as 222 (2—STAY) or 333 (3—
AWAY), and the user that armed to that level. See “Notification By Pager”.
Latchkey Opening
The installer can set up Latchkey Opening for one of two types of use: Basic and Advanced.
Basic Latchkey Opening
If your system is set up for Basic Latchkey, there are...

Concord  4 Series Security Systems26
3. To schedule:

Concord  4 Series Security Systems27
Who Can Send a Page?
All user codes and keychain touchpads will send a page if used while Notify by Exception fea-
ture is in effect.
What Will the Pager Report?
Exception Opening Reports report the arming level as 111 (1—OFF) and the user that disarmed 
the system.
Exception Closing Reports report the arming level as 222 (2—STAY) or 333 (3—AWAY), and 
the user that armed to that level. See “Notification By Pager”.
When Will this Feature Be Active? 
The most typical...

Concord  4 Series Security Systems28
• Back up data from your system.
• Allow your dealer to quickly implement requested programming changes.
Note  Before allowing any down-
load sessions, the system 
must be disarmed to level 
1—OFF.

Concord  4 Series Security Systems29

Concord  4 Series Security Systems30
3. Press # to disarm all displayed partitions.
Or,
Press the number of any partitions you don’t want disarmed (the partition numbers disappear 
from the display), then press #.
4. If desired, press 4 (No Delay) or 6 (Latchkey) to activate those features.
Notes on Arming/Disarming Multiple Partitions from Alphanumeric and Fixed Display 
Touchpads
• A partition cannot be armed or disarmed if it is being controlled by another source at that 
time. For example, if you are...