GE Concord 4 User Manual

Concord  4 Series Security Systems51
Appendix B: 
Planning for 
EmergenciesDevelop plans for a variety of emergency situations. Periodically discuss and rehearse emer-
gency plans that include the following:
• Understand how to use your security system.
• Know the normal state of doors and windows; open, closed, or locked.
• Use a different escape route if closed doors feel hot to the touch.
• Emphasize that everyone should escape as quickly as possible. Do not stop to gather any 
belongings.
• Crawl and...

Concord  4 Series Security Systems52
Figure 13. Floor Plan Example
Your Floor Plan
Use the following guidelines when drawing your floor plan on the next page:

Concord  4 Series Security Systems53
Floor Plan 

Concord  4 Series Security Systems54
Alarm System Limitations
Not even the most advanced alarm system can guarantee protection against burglary, fire, or 
environmental emergencies. All alarm systems are subject to possible compromise or failure-to-
warn, for a variety of reasons including:
• If sirens are not placed within range of persons sleeping, in remote areas of the premises, or if 
they are placed behind doors or other obstacles.
• If intruders gain access through unprotected entry points or...

Concord  4 Series Security Systems55
Appendix C: 
Programming 
Your SystemYou can program the following items on your system:
• System time and date
•User codes
• Schedules
• Schedule events
• Downloading feature
• Brightness of touchpads
• Volume of speakers
• Chime features
• Energy saver options
• Attach lights to sensors
Two Methods to Program Your System
There are 2 methods for programming your system:
• Programming menus—Offer visual text cues from your touchpad.
• Programming shortcuts—Allow you...

Concord  4 Series Security Systems56
3. Press B until the touchpad displays the type of code you wish to change (Regular User codes, 
Partition Master Codes, or System Master code), then press 
#. For example, if you want to 
change a Regular User code, press 
# when the touchpad displays “REGULAR USER 
CODES” or “REG CODES.”
4. Press 
B until the touchpad displays the user code you wish to change, then press #. For exam-
ple, if you want to change Regular User code 2, press 
# when the touchpad displays...

Concord  4 Series Security Systems57
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press B until the 
display reads “SYSTEM MASTER CODE” or “SYS MASTER,” then press 
#. 
4. Replace the existing code with the new 4 digit System Master Code then press 
#.
5. Press 
* + 00 + # to exit the programming menus.
Using Programming Shortcuts 
A programming shortcut is a number that “jumps” you to a particular spot in the programming 
menus.
A series of shortcut numbers takes you directly to the...

Concord  4 Series Security Systems58
Chime on Close* + 046 + 1(off) or 2(on) + #
Time Schedule xx (00-15) Start Time:* + 05XX0 + TTTT + #
Stop Time:* + 05XX1 + TTTT + #
Mon: * + 05XX2 + 1(off) or 2(on) + #
Tu e s :* + 05XX3 + 1(off) or 2(on) + #
We d :* + 05XX4 + 1(off) or 2(on) + #
Thurs:* + 05XX5 + 1(off) or 2(on) + #
Fri:* + 05XX6 + 1(off) or 2(on) + #
Sat:* + 05XX7 + 1(off) or 2(on) + #
Sun:* + 05XX8 + 1(off) or 2(on) + #
Latchkey OpeningAttaching schedules for Latchkey Opening operation:
Sched 0: *...

Concord  4 Series Security Systems59
Light 4 Attaching schedules for Light 4 operation:
Sched 0: * + 064300 + 1(off) or 2(on) + #
Sched 1: * + 064301 + 1(off) or 2(on) + #
(Continues through Schedule 15)
Sched 15: * + 064315 + 1(off) or 2(on) + #
Light 5Attaching schedules for Light 5 operation:
Sched 0: * + 064400 + 1(off) or 2(on) + #
Sched 1: * + 064401 + 1(off) or 2(on) + #
(Continues through Schedule 15)
Sched 15: * + 064415 + 1(off) or 2(on) + #
Light 6 Attaching schedules for Light 6 operation:...

Concord  4 Series Security Systems60
Output 3 Attaching schedules for Output 3 operation:
Sched 0:* + 065200 + 1(off) or 2(on) + #
Sched 1:* + 065201 + 1(off) or 2(on) + #
(Continues through Schedule 15)
Sched 15:* + 065215 + 1(off) or 2(on) + #
Output 4Attaching schedules for Output 4 operation:
Sched 0:* + 065300 + 1(off) or 2(on) + #
Sched 1:* + 065301 + 1(off) or 2(on) + #
(Continues through Schedule 15)
Sched 15:* + 065315 + 1(off) or 2(on) + #
Output 5 Attaching schedules for Output 5 operation:...