GE Vivid 7 Service Manual

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 7
3-3-4 Receiving the Vivid 7
3-3-4-1 Examine All Packages Examine all packages closely at time of de livery, as described in the procedure below.
Table 3-5    Examine All Packages
STEPTASKILLUSTRATIONS
1 Is damage apparent?
• If yes; continue with the instructions in subsection 
3-3-4-2 - Damage in Transportation .
• If  no; continue with the next step.
2 Is the Shock Indicator red colored inside the...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 8 Section 3-3 - Receiving  and Unpacking the Equipment
3-3-4-2 Damage in Transportation
Follow this procedure if damage is apparent, or  if the Tilt & Drop Indicators show failure:
Table 3-6    Damage in Transportation
STEPTASK
1 Write “Damage In Shipment” on ALL copies of the freight  or express bill BEFORE delivery is accepted or “signed 
for” by a GE representative  or hospital receiving agent.
2 Report the damage to the...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 9
3-3-4-3 Vivid 7 Transportation Box Label The Vivid 7  Transportation Box Label is located at the front of the transportation box.
Figure 3-3   Vivid 7 Transportation Box Label
HANDLE WITH 
CARE KEEP DRY,
PROTECT FROM MOISTURE
TOP. UPRIGHT 
TRANSPORTATION & 
STORAGE
RECYCLING.
RECYCLABLE WOOD KEEP TRANSPORTATION 
TEMPERATURE BETWEEN 
-20°C and +60°C RELATIVE HUMIDITY 
BETWEEN 30 and 95% 
FRAGILE,...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 10 Section 3-3 - Receiving  and Unpacking the Equipment
3-3-5 Unpacking Vivid 7
CAUTIONTwo people are needed to unpack the unit because of its weight.
Attempts to move the unit considerable distances or on an incline by one person could result 
in injury or damage or both.
Two people are required whenever a part weighing 16 kg (35 lbs) or more must be lifted or 
pushed up or down a slope.
Table 3-7    Unpacking Vivid 7...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 11
4.
• Press once on the brake pedal to release the brakes.
• Keep direction lock activated. The direction lock keeps the fr ont wheels from swiveling and blocking the system inside the 
narrow transportation box. 
Table 3-7    Unpacking Vivid 7 (cont’d)
StepTask
Transport notice FC314187-03
NOTIC E
M ovin g V iv id 7/L ogiq 9 i n  a nd o ut o f t h e t r a nsp orta tio n b ox
Vivid 7/Logiq 9 has...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 12 Section 3-3 - Receiving  and Unpacking the Equipment
5.Carefully move the instrument out of the Transportation Box, down the ramp, with rear end first.
6.Vivid 7 with LCD: Remove part number 10 (LCD monitor enforcement).
7. Remove the clear plastic (wrapped around the scanner) from the unit.
8. Place all the filling material inside  the Transportation Box, close it and store it for possible use in the future.
Table 3-7...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 13
Section 3-4
Packing Materials - Re cycling Information
The packing materials for Vivid 7 are recyclable:
• The Transportation Box is made  of spruce or similar material.
(“PHYTOSANITARY CERTIFICATE” incl uded in all shipments to The Peoples Republic of China.)
• Lever lockings (hinges) are made of zinc plated steel.
• The inner reinforcements are made of Ethafoam (Polyethylene foam).
• The plastic...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 14 Section 3-5 - Preparing for Setup
Section 3-5
Preparing for Setup
3-5-1 Physical Inspection
• Verify that the system arrive d intact (visual inspection). 
If the system has been damaged, please refer to “Damage in Transportation“ on page  viii in the 
beginning of this manual.
• Verify that all items are present (see the Pa cking List). Report any missing parts on the Post 
Delivery Checklist .
3-5-2 EMI Protection
This unit...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 15
3-6-2 Electrical  Specifications
3-6-2-1 Verification of the System’s Voltage Settings
Verify that the mains voltage specif ied for the unit is available on-site.
The Voltage setting for the unit is found on a label ne ar the Mains Power Circuit Breaker at the rear of 
the system, see  Figure 3-4 on page 3-15 . 
See also  Table 3-10 Electrical Specifications for Vivid 7 on page 3-16 ....

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 16 Section 3-5 - Preparing for Setup
3-6-2-2 Electrical Specifications for Vivid 7 Table 3-10    Electrical Specifications for Vivid 7   sheet 1 of 3
GE VINGMED 
PART NUMBER
DESCRIPTIONVOLTAGETOLERANCESCURRENTFREQUENCY
FD000010 VIVID 7 DIMENSION CONSOLE, 
LCD MONITOR 230 VAC ±10% 5 A 50-60 Hz
FD000020  VIVID 7 DIMENSION CONSOLE, 
LCD MONITOR 100-120 VAC ±10% 10 A 50-60 Hz
FD000120  VIVID 7 PRO CONSOLE, 
LCD MONITOR 230 VAC ±10%...