GE Vivid 7 Service Manual

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 43
1-5-13 Label on Rear Cover -  Vivid 7 Dimension for Korea
Table 1-21    Label on Rear Cover - Vivid 7 Dimension for Korea   
DESCRIPTIONILLUSTRATION
Label, General Info
(Located on rear of system)
Label used for Vivid 7 Dimension after DEC. 2006
l 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 44 Section 1-5 - Labels Locations
1-5-14 Label on Rear Cover  - Vivid 7 PRO for Korea
Table 1-22    Label on Rear Cover - Vivid 7 PRO for Korea   
DESCRIPTIONILLUSTRATION
Label, General Info
(Located on rear of system)
Label used for Vivid 7 Dimension after DEC. 2006
l 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 45
1-5-15 Label on Rear Cover - Vi vid 7 - Details Descriptions
Table 1-23    Label on Rear Cover - Vivid  7, Details Descriptions   sheet 1 of 2
DESCRIPTIONILLUSTRATION
Label on rear side of the Vivid 7.
l
CLASS I
The Vivid 7 ultrasound unit is a Class I 
device, type CF, according to Sub-
clause 14 of IEC60601-1 (1988).
TYPE CF
Equipment Type CF (heart in the box 
symbol) IEC 878-02-05 indicates...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 46 Section 1-5 - Labels Locations
Vivid 7 SCANNERS PRODUCED  AFTER SEPTEMBER 2004:
“TESTED AND PRODUCTION 
MONITORED BY TUV PRODUCT 
SERVICE NRTL WITH RESPECT TO 
ELECTRICAL SHOCK, FIRE AND 
MECHANICAL HAZARDS ONLY IN 
ACCORDANCE WITH UL2601-1 AND 
CAN/CSA C22.2 NO.601.1”
Products produced before September 
2004 will bear the c-UL-us Classification  mark, shown below.
Vivid 7 SCANNERS PRODUCED AFTER SEPTEMBER 2004:
Vivid 7...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 47
1-5-16 Labels on Internal  I/O (Inside Scanner)
Label on Front-End Card Cage Side of Internal I/O
Figure 1-2   Labels on Internal I/O (Inside S canner), Front-End Card Cage Side of Internal I/O 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 48 Section 1-5 - Labels Locations
1-5-17 Labels on Internal  I/O (Inside Scanner)
Label on Back-End Processor Side of Internal I/O
 
Figure 1-3   Labels on Internal I/O (Inside S canner), Back-End Processor Side of Internal I/O 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 49
1-5-17      Labels on Intern al I/O (Inside Scanner) (cont’d)
Figure 1-4   Label on Internal I/O on units with BEP2
B1 USB#1 (top console conection)
B2 USB#2 (external i/o connection)
B3 10/100 Base-TX Ethernet
B4 Audio in to BEP, Audio out from BEP, Microphone in to BEP
B5 PC2IO board signals
B6 PC2IO board signals and power
B7 COM (external i/o connection) NOT USED
B8 COM (modem - setup as COM2)
B9...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 50 Section 1-5 - Labels Locations
1-5-17      Labels on Intern al I/O (Inside Scanner) (cont’d)
NOTE: On units with RFI ONLY: A1 1 has been moved from the Internal I/O module to the BEP.
Figure 1-5   Label on Internal I/O on  units with BEP2.2, BEP3 and BEP3.2 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 1 - Introduction 1 - 51
1-5-18 Label, Internal  Connections (Int.Conn.) 
Located on the outside of the Front-End Card Rack  (FEP1) Cover (inside Vivid 7). Different versions of 
the label have been used since production start. 
 
Figure 1-6   Label on FEP1, Internal Connections 
K1 K2
K3
Cable and Connector numbering and naming system used:IIO = Internal IO module
EIO = External IO module
BEP = Backend Processor
FEP =...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
1 - 52 Section 1-5 - Labels Locations
1-5-19 Label, Internal  Connections (Int.Conn.) 
Located on the outside of the Front-End Card Rack’s  cover (inside unit). Different versions of the label 
have been used since production start.
Figure 1-7   Label on FEP2 (w/RFI)
K1 K2
K3
Cable and Connector numbering and naming s
ystem used:IIO = Internal IO module
EIO = External IO module
B EP = Backend Processor
FEP = Frontend Processor
ACP...